mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-12-01 06:30:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/qt-ui/preferences.cpp

142 lines
4.5 KiB
C++
Raw Normal View History

Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
#include "preferences.h"
#include "ui_preferences.h"
#include <QSettings>
PreferencesDialog* PreferencesDialog::instance()
{
static PreferencesDialog *dialog = new PreferencesDialog();
return dialog;
}
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
#define B(V, P) s.value(#V, default_prefs.P).toBool()
#define D(V, P) s.value(#V, default_prefs.P).toDouble()
#define I(V, P) s.value(#V, default_prefs.P).toInt()
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
PreferencesDialog::PreferencesDialog(QWidget* parent, Qt::WindowFlags f) : QDialog(parent, f)
, ui(new Ui::PreferencesDialog())
{
ui->setupUi(this);
connect(ui->buttonBox, SIGNAL(accepted()), this, SLOT(syncSettings()));
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
connect(ui->buttonBox, SIGNAL(rejected()), this, SLOT(resetSettings()));
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
oldPrefs = prefs;
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
QSettings s;
// Graph
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.beginGroup("TecDetails");
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->phe->setChecked(B(phegraph, pp_graphs.phe));
Correctly enable partial pressure threshold entry in preferences The initial state needs to reflect the value of the checkbox. Once the dialog is run, there is a signal/slot connection in the .ui file that keeps things in sync. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 05:58:22 +00:00
ui->pheThreshold->setEnabled(ui->phe->isChecked());
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->po2->setChecked(B(po2graph, pp_graphs.po2));
Correctly enable partial pressure threshold entry in preferences The initial state needs to reflect the value of the checkbox. Once the dialog is run, there is a signal/slot connection in the .ui file that keeps things in sync. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 05:58:22 +00:00
ui->po2Threshold->setEnabled(ui->po2->isChecked());
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->pn2->setChecked(B(pn2graph, pp_graphs.pn2));
Correctly enable partial pressure threshold entry in preferences The initial state needs to reflect the value of the checkbox. Once the dialog is run, there is a signal/slot connection in the .ui file that keeps things in sync. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 05:58:22 +00:00
ui->pn2Threshold->setEnabled(ui->pn2->isChecked());
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->pheThreshold->setValue(D(phethreshold, pp_graphs.phe_threshold));
ui->po2Threshold->setValue(D(po2threshold, pp_graphs.po2_threshold));
ui->pn2Threshold->setValue(D(pn2threshold, pp_graphs.pn2_threshold));
ui->ead_end_eadd->setChecked(B(ead, ead));
ui->dc_reported_ceiling->setChecked(B(dcceiling, profile_dc_ceiling));
Correct the ceiling preference handling Added the red dc ceiling as preference option. Hooked them all up together so the sub-preferences are enabled when the master preference is set (for 3m and red ceiling). Use the options in the profile plotting functions. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 06:32:31 +00:00
ui->red_ceiling->setEnabled(ui->dc_reported_ceiling->isChecked());
ui->red_ceiling->setChecked(B(redceiling, profile_red_ceiling));
ui->calculated_ceiling->setChecked(B(calcceiling, profile_calc_ceiling));
ui->increment_3m->setEnabled(ui->calculated_ceiling->isChecked());
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->increment_3m->setChecked(B(calcceiling3m, calc_ceiling_3m_incr));
Correct the ceiling preference handling Added the red dc ceiling as preference option. Hooked them all up together so the sub-preferences are enabled when the master preference is set (for 3m and red ceiling). Use the options in the profile plotting functions. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 06:32:31 +00:00
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->gflow->setValue((int)(I(gflow, gflow)));
ui->gfhigh->setValue((int)(I(gfhigh, gfhigh)));
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.endGroup();
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
// Units
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.beginGroup("Units");
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
bool value = s.value("units_metric").toBool();
ui->metric->setChecked(value);
ui->imperial->setChecked(!value);
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
int unit = s.value("temperature").toInt();
ui->celsius->setChecked(unit == units::CELSIUS);
ui->fahrenheit->setChecked(unit == units::FAHRENHEIT);
unit = s.value("length").toInt();
ui->meter->setChecked(unit == units::METERS);
ui->feet->setChecked(unit == units::FEET);
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
unit = s.value("pressure").toInt();
ui->bar->setChecked(unit == units::BAR);
ui->psi->setChecked(unit == units::PSI);
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
unit = s.value("volume").toInt();
ui->liter->setChecked(unit == units::LITER);
ui->cuft->setChecked(unit == units::CUFT);
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
unit = s.value("weight").toInt();
ui->kgs->setChecked(unit == units::KG);
ui->lbs->setChecked(unit == units::LBS);
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.endGroup();
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
// Defaults
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.beginGroup("GeneralSettings");
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
ui->font->setFont( QFont(s.value("table_fonts").toString()));
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->fontsize->setValue(D(font_size, font_size));
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
ui->defaultfilename->setText(s.value("default_filename").toString());
ui->displayinvalid->setChecked(B(show_invalid, show_invalid));
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.endGroup();
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
}
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
#undef B
#undef D
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
void PreferencesDialog::resetSettings()
{
prefs = oldPrefs;
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
}
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
#define SB(V, B) s.setValue(V, (int)(B->isChecked() ? 1 : 0))
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
void PreferencesDialog::syncSettings()
{
QSettings s;
// Graph
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.beginGroup("TecDetails");
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
SB("phegraph", ui->phe);
SB("po2graph", ui->po2);
SB("pn2graph", ui->pn2);
s.setValue("phethreshold", ui->pheThreshold->value());
s.setValue("po2threshold", ui->po2Threshold->value());
s.setValue("pn2threshold", ui->pn2Threshold->value());
SB("ead", ui->ead_end_eadd);
SB("dcceiling", ui->dc_reported_ceiling);
Correct the ceiling preference handling Added the red dc ceiling as preference option. Hooked them all up together so the sub-preferences are enabled when the master preference is set (for 3m and red ceiling). Use the options in the profile plotting functions. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-29 06:32:31 +00:00
SB("redceiling", ui->red_ceiling);
SB("calcceiling", ui->calculated_ceiling);
SB("calcceiling3m", ui->increment_3m);
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
s.setValue("gflow", ui->gflow->value());
s.setValue("gfhigh", ui->gfhigh->value());
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.endGroup();
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
// Units
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.beginGroup("Units");
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
s.setValue("units_metric", ui->metric->isChecked());
Hook up most of the Preferences dialog The imperial/metric super setting doesn't have any effect. But changing the individual units now works and is tracked. And causes the display to change after clicking "OK" (but not yet when clicking "Apply"). Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 18:33:45 +00:00
s.setValue("temperature", ui->fahrenheit->isChecked() ? units::FAHRENHEIT : units::CELSIUS);
s.setValue("length", ui->feet->isChecked() ? units::FEET : units::METERS);
s.setValue("pressure", ui->psi->isChecked() ? units::PSI : units::BAR);
s.setValue("volume", ui->cuft->isChecked() ? units::CUFT : units::LITER);
s.setValue("weight", ui->lbs->isChecked() ? units::LBS : units::KG);
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.endGroup();
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
// Defaults
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.beginGroup("GeneralSettings");
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
s.value("table_fonts", ui->font->font().family());
s.value("font_size", ui->fontsize->value());
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
s.value("default_filename", ui->defaultfilename->text());
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
s.value("displayinvalid", ui->displayinvalid->isChecked());
Repair the saving and loading of units This way it should work... Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-26 17:49:05 +00:00
s.endGroup();
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
s.sync();
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
oldPrefs = prefs;
Added support for a preliminary Preferences Dialog Dirk asked me to try to make it more modern, so I used as a base, the Firefox preferences. currently it saves / loads the preferences, and also smits a signal 'preferencesChanged' that should be connected to anything that uses preferenes, via the PreferencesDialog::intance() object. In the future, I plan to make it have a signal / slot for each member that changes. I also moved the icons to a new folder this time, because the amount of icons is now more than just two, and it was becoming messy. Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
2013-05-24 18:19:48 +00:00
emit settingsChanged();
}
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
#undef SB
Reference in a new issue Copy permalink