mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-12-02 23:20:20 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/pref.h

79 lines
1.9 KiB
C
Raw Normal View History

Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
#ifndef PREF_H
#define PREF_H
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
extern "C" {
#endif
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
/* can't use 'bool' for the boolean values - different size in C and C++ */
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-28 04:09:57 +00:00
typedef struct
{
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short po2;
short pn2;
short phe;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
double po2_threshold;
double pn2_threshold;
double phe_threshold;
} partial_pressure_graphs_t;
struct preferences {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
const char *divelist_font;
const char *default_filename;
Create a text entry for default cylinder in preferences We don't do anything with this just yet. And frankly, a drop down of the cylinders that we know of would be even better. But hey, it's a start. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-23 23:34:17 +00:00
const char *default_cylinder;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
double font_size;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
partial_pressure_graphs_t pp_graphs;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short mod;
Add support for MOD, EAD, AND and EADD in the mouse over display - MOD: Maximum Operation Depth based on a configurable limit - EAD: Equivalent Air Depth considering N2 and (!) O2 narcotic - END: Equivalent Nitrogen (Narcotic) Depth considering just N2 narcotic (ignoring O2) - EADD: Equivalent Air Density Depth Please note that some people and even diving organisations have opposite definitions for EAD and END. Considering A stands for Air, lets choose the above. And considering N for Nitrogen it also fits in this scheme. This patch moves N2_IN_AIR from deco.c to dive.h as this is already used in several places and might be useful for future use also. It also respecifies N2_IN_AIR to a more correct value of 78,084%, the former one also included all other gases than oxygen appearing in air. If someone needs to use the former value it would be more correct to use 1-O2_IN_AIR instead. Signed-off-by: Jan Schubert / Jan.Schubert@GMX.li Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-14 00:24:58 +00:00
double mod_ppO2;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short ead;
short profile_dc_ceiling;
short profile_red_ceiling;
short profile_calc_ceiling;
short calc_ceiling_3m_incr;
Show ceilings for individual tissues I think that displaying tissue loadings either as pressure or as percentages is not very intuitive but that it makes much more sense when translated to ceiling depths. This change enables just that for the 16 tissues in our calculated ceiling and visualizes this in the profile graph. There is a checkbox in the preferences to turn this on. If enabled, all tissues having non-trivial ceilings are also shown in the info box. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-30 18:56:00 +00:00
short calc_all_tissues;
Introduce an on/off switch for calculating ndl/tts Let the user choose if the calculation of ndl and tts is worth the time it takes. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-12 22:09:57 +00:00
short calc_ndl_tts;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short gflow;
short gfhigh;
Added a configuration option to have gf_low apply at max depth instead of at deepest ceiling. Signed-off-by: Patrick Valsecchi <patrick@thus.ch> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-20 15:11:22 +00:00
bool gf_low_at_maxdepth;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short display_invalid_dives;
Tie all the pieces together and make Preferences work as intended Not Apply / Close without Saving / OK work as designed. And things get correctly stored and reset. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-06-03 12:08:49 +00:00
short unit_system;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
struct units units;
Show SAC in the mouseover. This is really nice to have when looking at specific parts of a dive. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-10-14 21:48:44 +00:00
short show_sac;
Don't show tanks that aren't used during a dive Some dive computers will always download all tanks that they store, not just the ones used in a dive. Most people only want to see the tanks that they actually used during the dive (and for the others there's an option to go back to the old behavior, just in case). All this is only in memory / during runtime. If the dive computer provided the extra data we will not throw it away. Fixes #373 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-01-11 14:57:06 +00:00
bool display_unused_tanks;
Toggle showing average depth Add additional check box in "preferences->graph" section that allows users to hide average depth on dive profile. By default this option is checked to show average depth. Fixes #475 Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-03-27 18:38:07 +00:00
bool show_average_depth;
Store zoomed plot in preferences This patch makes the 'Zoomed Plot' a preference that can be stored and retrieved, this way if the user sets the plot to be 'zoomed', this information will persist even if they closed or opened subsurface again. Also, added the 'Scale' button on the new profile, but didn't did the glue code yet. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-27 15:31:00 +00:00
bool zoomed_plot;
Show temperature units in the label when editing dive Currently when user wants to add a new dive information, the ways to know what unit system is being used are - Through preferences panel. - Save the dive information, which displays units in the text field. This patch provides an option to the user to show current unit system by displaying the unit on the side of the label when the user is editing the fields. This feature can be enabled or disabled by using the new checkbox option i.e. `Show units in text labels` included in `preferences->units` section. Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-03-11 03:49:08 +00:00
bool text_label_with_units;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
};
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-28 04:09:57 +00:00
enum unit_system_values {
METRIC,
IMPERIAL,
PERSONALIZE
};
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
extern struct preferences prefs, default_prefs;
#define PP_GRAPHS_ENABLED (prefs.pp_graphs.po2 || prefs.pp_graphs.pn2 || prefs.pp_graphs.phe)
extern void subsurface_open_conf(void);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
extern void subsurface_set_conf(const char *name, const char *value);
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
extern void subsurface_set_conf_bool(const char *name, bool value);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
extern void subsurface_set_conf_int(const char *name, int value);
extern void subsurface_unset_conf(const char *name);
extern const char *subsurface_get_conf(const char *name);
extern int subsurface_get_conf_bool(const char *name);
extern int subsurface_get_conf_int(const char *name);
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
extern void subsurface_flush_conf(void);
extern void subsurface_close_conf(void);
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-12 01:07:22 +00:00
extern const char system_divelist_default_font[];
Fix system default font handling We didn't care about system default fonts and sizes, we just used the Qt default font. Due to how QFont is constructed, there was need to split font and font size. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-03-21 17:56:10 +00:00
extern const int system_divelist_default_font_size;
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-12 01:07:22 +00:00
extern const char *system_default_filename();
Update preference saving for numeric values This does the "don't save defaults" for numeric values too. Also, move the preferences loading/saving to a new "prefs.c" file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 18:14:10 +00:00
extern void load_preferences(void);
extern void save_preferences(void);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
}
#endif
Put include guard to every header * ensure include guard to every header * comment endif guard block Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-11 18:14:46 +00:00
#endif // PREF_H
Reference in a new issue Copy permalink