mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-11-30 22:20:21 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/CHANGELOG.md

38 lines
2.3 KiB
Markdown
Raw Normal View History

Equipment: Mark Gas Mixes Reported as 'inactive' as 'not used. Mark gases that are reported as 'inactive' by the dive computer as 'not used' in the Equipment tab. Requires https://github.com/subsurface/libdc/pull/52. Signed-off-by: Michael Keller <github@ike.ch>
2023-07-09 02:51:39 +00:00
equipment: mark gas mixes reported by the dive computer as 'inactive' as 'not used'
Equipment: Include Unused Tanks in Merge if Preference is Enabled. Include unused tanks in merges of multiple logs into a single dive if the 'Show unused cylinders' preference is enabled. Also rename the preference (in code) to `include_unused_tanks` to reflect the fact that it is already used in more places than just the display (exporting, cloning dives). Simplified the cylinder model to make forced inclusion of unused tanks dependent on use of the model in planner. Leaving the persisted name of the preference as `display_unused_tanks` to avoid resetting this for all users - is there a good way to migrate preference names? Signed-off-by: Michael Keller <github@ike.ch>
2023-07-09 00:14:27 +00:00
equipment: include unused cylinders in merged dive if the preference is enabled
Desktop: Add a Button to Hide the Infobox in the Dive Profile. Add a button that allows the user to hide the infobox with statistics about the point in the dive under the mouse cursor in order to be able to see the full dive profile unobstructed. Signed-off-by: Michael Keller <github@ike.ch>
2023-06-18 03:28:51 +00:00
desktop: added button to hide the infobox in the dive profile
Desktop: Use Persisted Device Information for Dive Computer Configuration. Use the dive computer / device information that was persisted when previously downloading dives or configuring the dive computer in the dive computer configuration dialog. Also rename 'Connect with bluetooth' and 'Cancel' buttons in the dialog to make them more consistent with what they do. Signed-off-by: Michael Keller <github@ike.ch>
2023-06-12 02:27:02 +00:00
desktop: use persisted device information for the dive computer configuration
Core: Fix bug salinity and pressure values in mbar <-> depth conversion The conversion between mbar and depth sometimes uses DC's salinity, sometimes user's salinity. By other hand, it uses surface pressure given by user in calculation. This fix try to standartize this values, using them from same source. Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
2023-06-02 05:16:14 +00:00
core: fix bug using salinity and pressure values in mbar <-> depth conversion
Desktop: Rework the Summary CSV Export XSLT. Rework of the XSLT used to generate the Summary CSV export: - fixed a bug causing invalid CSV to be generated for double quotes (`""`); - changed quoting and escaping to be compliant with RFC 4180; - changed output to contain information for all cylinders for all dives (instead of limiting the number of cylinders to howevermany are used for the last dive); - added an index to the cylinder data headings; - changed unit designators to use `[]` instead of `()`; - some minor improvements to the XSLT. Signed-off-by: Michael Keller <github@ike.ch>
2023-05-21 11:43:15 +00:00
export: fix bug resulting in invalid CSV for '""' in 'CSV summary dive details'
Desktop: Add Multi-Tank Support for Profile Ruler. Add support for tracking the gas usage across multiple tanks to the 'bar used' and SAC values shown for the profile ruler. The following rules are implemented: - a tank is considered 'used' if at least one bar has been consumed; - only used tanks are taken into account for calculations; - 'bar used' is only shown if all tanks used have the same (or unknown) volume; - SAC is only shown if all tanks used have a known volume. Fixes #3902. Reported-by: @pabdakine Signed-off-by: Michael Keller <github@ike.ch>
2023-05-26 08:05:05 +00:00
desktop: add support for multiple tanks to the profile ruler
Desktop: Change 'CSV summary dive details' output from TSV to CSV. Change the output formato for the Export / 'CSV summary dive details' from TSV to CSV, to make it consistent with the menu item name, and with the other 'CSV' export function. This was changed to TSV by @mturkia in https://github.com/subsurface/subsurface/commit/6c825785401ea3e450795db8887eba9444c9b7b5, but I could not find any discussion as to why. Also removed replacement of the field separator in any fields, as, according to the CSV RFC (https://datatracker.ietf.org/doc/html/rfc4180) this is not required as long as the fields containing separators are enclosed in quotes, and any quotes within the fields are doubled up. Tested with a fairly large log file, and importing into Google Sheets is working fine for the output produced. Also made capitalisation of the Export menu items consistent. Signed-off-by: Michael Keller <github@ike.ch>
2023-04-28 01:15:31 +00:00
export: change format produced by 'CSV summary dive details' from TSV (tab separated) to CSV
Desktop: Add mergeing into the selected dive site. When editing a dive site in the 'Dive sites' view, add a context menu entry to allow mergeing of the displayed dive site into the dive site seleted in the 'Near dive sites' list. This merge has the opposite direction of the existing 'Merge into current site' function, which can simplify the workflow when maintaining a large number of dive sites, as the facilities to sort dive sites in the 'Dive sites' view does not have a way to sort by location or proximity. Signed-off-by: Michael Keller <github@ike.ch>
2023-04-21 12:18:32 +00:00
desktop: add function to merge dive site into site selected in list
Import: Add option to sync time on dive computer download Add an option for users to sync the dive computer time with the PC time every time dives are downloaded. Obviously this will only work on dive computers that have time synchronisation support in libdivecomputer, for other computers a notice is logged. The selection for this option is persisted as a preference. Signed-off-by: Michael Keller <github@ike.ch>
2023-04-02 06:28:33 +00:00
import: add option to synchronise dive computer time when downloading dives
Fix salinity combo/icon when DC doesnt have salinity info Today salinity combo is editable if one of these rules matches: The dive was manually entered or if salinity edition is allowed in preferences. However we can have cases that dives were downloaded but its doesn't have salinity info. This fix considers if there's a DC salinity info to decides combo edition and if salinity change indicator will be showed or not. If DC doesn't have salinity, the UI behavior is the same of a manual dive Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
2023-03-29 15:49:55 +00:00
desktop: fix salinity combo/icon when DC doesnt have salinity info
Saves default sea water salinity in log Some DCs only report water type, without salinity level. Subsurface fixes most of these cases using default levels, but when the type of water is Sea/Salt, this fix was not saved. This causes a bit confusion, mainly if the user defines own salinity level. Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
2023-03-27 17:35:24 +00:00
core: fix bug when save sea water salinity given by DC
Desktop: Add option to force overwrite firmware for OSTC4. In order to support development of the open source firmware of the OSTC4. Requires changes in libdivecomputer. Signed-off-by: Michael Keller <github@ike.ch>
2023-03-02 12:01:46 +00:00
desktop: add option to force firmware update on OSTC4
Desktop: Add notes column to dive list table. Add a column for dive notes to the dive list table. The column is disabled by default. As requested in https://groups.google.com/g/subsurface-divelog/c/PEFre85Ek1M. Signed-off-by: Michael Keller <github@ike.ch>
2023-03-16 00:29:43 +00:00
desktop: add column for dive notes to the dive list table
Add printing option for page orientation Strangely enough, half of the infrastructure was already there, it just wasn't hooked up to a UI element Signed-off-by: Robert C. Helling <helling@atdotde.de>
2023-03-18 17:23:33 +00:00
desktop: Add an option for printing in landscape mode
Desktop: Fix bug in diveplan for CCR dives with multiple segments. Fixes a bug reported in https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E: When planning a CCR dive with multiple segments, the textual dive plan was showing a non-existent gas change with bogus data. The first part of the fix is uncluttering of the message printed: Since this change is _after_ the current diveplanpoint the data needs to come from `nextdp` and not `dp`. The second part is that the message is not printed any more if the current and the following segments have been manually added: According to comments in the code the change should only be printed on the segment _before_ the change if this segment is an ascent segment that is followed by a manually entered segment. Signed-off-by: Michael Keller <github@ike.ch>
2023-02-17 12:45:37 +00:00
desktop: fix bug when printing a dive plan with multiple segments
Desktop: Fix use of bluetooth address for remembered dive computer. Fix a bug causing the bluetooth address not being used when downloading from a 'remembered' dive computer if the device selection is populated. This specifically excludes MacOS, as 'remembering' bluetooth connections does not seem to be working there as per https://github.com/subsurface/subsurface/pull/2158#issuecomment-508933672. I am not super sure why we are _not_ trying to use the 'remembered' device if the device selection is populated (`ui.device->currentIndex() == -1`) - maybe this should be clarified in a comment? Signed-off-by: Michael Keller <github@ike.ch>
2023-02-28 00:55:36 +00:00
desktop: fix remembering of bluetooth address for remembered dive computers (not MacOS)
Fix invalid bailout gas choice when planning a CCR dive. Fixes a bug reported in https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E: When planning a CCR dive with OC bailout, the diluent gas may be chosen as the first OC bailout gas, despite being set up with a use type of 'diluent', and likely not being available for open circuit breathing. `best_first_ascend_cylinder` is now initialised to an invalid value (instead of the first cylinder, which may or may not be a diluent cylinder), and its subsequent use is guarded by a validity check. Signed-off-by: Michael Keller <github@ike.ch>
2023-02-16 02:53:17 +00:00
desktop: fix bug in bailout gas selection for CCR dives
desktop: fix multi-dive editing of cylinders 3629a87 changed the handling of cylinders in multi-dives edit. Not only should the cylinders be the "same", but also at the same position. The code did not check whether the edited dives even had that many cylinders, leading to a null-pointer dereference. Check whether the cylinder exists before comparing it. Fixes #3578. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2023-02-10 18:00:49 +00:00
desktop: fix crash on cylinder update of multiple dives
Cylindermodel: Improve editing of tank use Use the drop down for editing the tank use in the gas list in both the equipment tab and the dive planner. The tank use column is now available in the equipment tab for all dives and not just CCR dives, as 'not used' is a valid entry in both cases. However, if the current dive is an OC dive, only 'OC-gas' and 'not used' are shown. There still seems to be a problem that in some cases, when opening the planner after selecting an existing CCR dive the drop down in the planner does not list CCR gas uses - for some reason `displayed_dive` does not seem to be updated correctly on opening of the planner. But I have not been able to reproduce this consistently, and changing 'Dive mode' fixes this. Signed-off-by: Michael Keller <github@ike.ch>
2023-01-21 00:09:44 +00:00
desktop: use dynamic tank use drop down in equipment tab and planner
Desktop: Fix brightness configuration for OSTC4 The Heinrichs Weikamp OSTC4 introduced an additional 'Cave' brightness level that is dimmer than all existing ones. Signed-off-by: Michael Keller <github@ike.ch>
2022-12-24 23:10:13 +00:00
desktop: fix brightness configuration for OSTC4
Improvement: Show gases as diluent by default for CCR dives. Instead of adding all gases read from a dive computer as part of a dive log as 'OC-gas', add gases as 'diluent' if the dive has a dive mode of 'CCR'. This creates consistency with the ppO2 for CCR dives being tracked as sensor readings or a fixed setpoint, and not as the ppO2 of the current gas ad depth. A follow up question from this is whether gas use in the cylinders list on the Equipment tab should be user editable. This seems to be inconsistent at the moment, with gas constituent percentages downloaded from the dive computer being editable, but gas use not. Signed-off-by: Michael Keller <github@ike.ch>
2023-01-20 00:41:06 +00:00
equipment: Use 'diluent' as default gas use type if the dive mode is 'CCR'
Update CHANGELOG.md Signed-off-by: Martin Splitt <martinsplitt@google.com> Signed-off-by: Martin Splitt <splitti@google.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2023-01-05 07:56:03 +00:00
htmlexport: fix search in HTML export
html export: update CHANGELOG.md Signed-off-by: Kim Delmar <62100831+KimDelmar@users.noreply.github.com>
2023-02-05 11:38:16 +00:00
htmlexport: fix diveguide display
statistics: fix zero-range on value axis The code that calculates the bounds of the value axis was broken when all items had the same value. In that case, increase the shown range explicitly. It doesn't really matter how much the range is increased, because all items will be at the center of the graph. Also, don't overwrite the "decimal" value of the class. That was just weird. Fixes #3544. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2022-11-16 16:24:06 +00:00
statistics: fix value axis for degenerate value ranges
Show correct gas density in CCR mode When collecting the data for the infobox, we have already computed the current partial pressures of the breathing gas taking into accoutn the divemode. Use those rather than fractions (which for CCR mode are those of diluent) to compute the gas density. Reported-by: Pietro Tranquillini <p.tranquillini@gmail.com> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2022-10-28 20:17:35 +00:00
profile: Show correct gas density when in CCR mode
statistics: add enough entries for date axis We must add one more entries than there are days, because the entries describe the values between histograms. The root cause of the problem here is that a histogram axis is misused for a continuous day-axis. Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
2022-10-19 20:17:56 +00:00
statistics: show correct color of selected scatter items when switching to unbinned mode
statistics: fix display of month number in continuous date axis
statistics: fix range of continuous date axis
desktop: make time shift dialog show correct times This got broken in commit 7417f865cd ("cleanup: un-singletonize ShiftTimesDialog") and no one ever noticed. We need to intitialize the when variable and set up the initial texts in order for the time shift dialog to show the correct information. Doing this in the ButtonClicked member (right before the dialog is destroyed) makes absolutely no sense. Fixes #3535 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2022-10-17 17:20:35 +00:00
desktop: fix dive time display in time shift dialog
update libdc garmin: relax string parsing sanity checks Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2023-01-03 01:00:48 +00:00
libdivecomputer: garmin: relax string parsing sanity checks
Update libdivecomputer Merge upstream updates from Jef Driesen: - Deepblu Cosmiq+ support has been merged upstream - Oceans S1 support has been merged upstream - Various new models supported: Cressi Donatello, Scubapro G2 TEK, new Excursion v6+ firmware. - misc core changes, most notably supporting a new annoying specialized binary format for decomode, because Jef still can't deal with strings. - lots of small details (all the work done by Linus - I'm just adding this to Surface) Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2023-02-20 19:57:27 +00:00
libdivecomputer: add Cressi Donatello, Scubapro G2 TEK, Oceanic Geo Air, Scorpena Alpha
update libdivecomputer Garmin: decode dive mode Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2022-05-30 20:08:01 +00:00
CHANGELOG.md: fix bad markdown formatting The # and <> characters introduced formatting issues, for those who wanted to view our changelog in the Github repository. Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2018-07-08 16:57:16 +00:00
---
* Always add new entries at the very top of this file above other existing entries and this note.
* Use this layout for new entries: `[Area]: [Details about the change] [reference thread / issue]`
CHANGELOG update This remove the old pre-3.0 entries and adds entries for 3.0.0->master Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2020-03-30 03:59:16 +00:00
# vim: textwidth=100
Reference in a new issue Copy permalink