subsurface/dives/TestComma.csv

Dive Time (s),Depth (m),PPO2 - Setpoint (Bar),PPO2 - C1 Cell 1 (Bar),PPO2 - C1 Cell 2 (Bar),PPO2 - C1 Cell 3 (Bar),PPO2 - C1 Measured (Bar),PPO2 - C2 Cell 1 (Bar),PPO2 - C2 Cell 2 (Bar),PPO2 - C2 Cell 3 (Bar),PPO2 - C2 Measured (Bar),C1 Battery 1 (Volts),C1 Battery 2 (Volts),C2 Battery 1 (Volts),C2 Battery 2 (Volts),Ambient Temp. (Celcius),OTU Exposure (%),CNS Exposure (%),Deco Ceiling (m),Gradient Factor
0,0.0,0,0,0,0,0,0,0,0,0,0,0,0,0,19.00,0,0,0,0
60,2.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
120,4.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
180,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
240,5.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
300,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
360,5.5,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0
420,7.0,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0
480,9.0,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0
540,11.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0
600,11.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0
660,12.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0
720,13.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0
780,16.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
840,17.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
900,18.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
960,18.5,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
1020,20.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
1080,18.5,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0
1140,16.0,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0
1200,10.5,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0
1260,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
1320,4.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
1380,2.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
1440,1.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
1460,0.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0
Allow comma separated CSV files The separator selector in the CSV import dialog was unused. This passes the value into the xslt and adds ',' as possible value. I'm sure this could be done much better (pass the actual character instead of the index), but I couldn't get that to work and this does seem to do the trick. Also added a test dive to test this feature. Fixes #321 Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2013-12-04 23:19:28 +00:00			`Dive Time (s),Depth (m),PPO2 - Setpoint (Bar),PPO2 - C1 Cell 1 (Bar),PPO2 - C1 Cell 2 (Bar),PPO2 - C1 Cell 3 (Bar),PPO2 - C1 Measured (Bar),PPO2 - C2 Cell 1 (Bar),PPO2 - C2 Cell 2 (Bar),PPO2 - C2 Cell 3 (Bar),PPO2 - C2 Measured (Bar),C1 Battery 1 (Volts),C1 Battery 2 (Volts),C2 Battery 1 (Volts),C2 Battery 2 (Volts),Ambient Temp. (Celcius),OTU Exposure (%),CNS Exposure (%),Deco Ceiling (m),Gradient Factor`
			`0,0.0,0,0,0,0,0,0,0,0,0,0,0,0,0,19.00,0,0,0,0`
			`60,2.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`120,4.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`180,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`240,5.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`300,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`360,5.5,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0`
			`420,7.0,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0`
			`480,9.0,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0`
			`540,11.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0`
			`600,11.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0`
			`660,12.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0`
			`720,13.5,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0`
			`780,16.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`840,17.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`900,18.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`960,18.5,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`1020,20.0,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`1080,18.5,0,0,0,0,0,0,0,0,0,0,0,0,0,15.00,0,0,0,0`
			`1140,16.0,0,0,0,0,0,0,0,0,0,0,0,0,0,16.00,0,0,0,0`
			`1200,10.5,0,0,0,0,0,0,0,0,0,0,0,0,0,17.00,0,0,0,0`
			`1260,5.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`1320,4.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`1380,2.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`1440,1.5,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`
			`1460,0.0,0,0,0,0,0,0,0,0,0,0,0,0,0,18.00,0,0,0,0`