mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-12-01 14:40:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/pref.h

80 lines
1.9 KiB
C
Raw Normal View History

Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
#ifndef PREF_H
#define PREF_H
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
extern "C" {
#endif
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
/* can't use 'bool' for the boolean values - different size in C and C++ */
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
typedef struct {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short cylinder;
short temperature;
short totalweight;
short suit;
short nitrox;
short sac;
short otu;
short maxcns;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
} visible_cols_t;
typedef struct {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short po2;
short pn2;
short phe;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
double po2_threshold;
double pn2_threshold;
double phe_threshold;
} partial_pressure_graphs_t;
struct preferences {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
const char *divelist_font;
const char *default_filename;
double font_size;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
visible_cols_t visible_cols;
partial_pressure_graphs_t pp_graphs;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short mod;
Add support for MOD, EAD, AND and EADD in the mouse over display - MOD: Maximum Operation Depth based on a configurable limit - EAD: Equivalent Air Depth considering N2 and (!) O2 narcotic - END: Equivalent Nitrogen (Narcotic) Depth considering just N2 narcotic (ignoring O2) - EADD: Equivalent Air Density Depth Please note that some people and even diving organisations have opposite definitions for EAD and END. Considering A stands for Air, lets choose the above. And considering N for Nitrogen it also fits in this scheme. This patch moves N2_IN_AIR from deco.c to dive.h as this is already used in several places and might be useful for future use also. It also respecifies N2_IN_AIR to a more correct value of 78,084%, the former one also included all other gases than oxygen appearing in air. If someone needs to use the former value it would be more correct to use 1-O2_IN_AIR instead. Signed-off-by: Jan Schubert / Jan.Schubert@GMX.li Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-14 00:24:58 +00:00
double mod_ppO2;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short ead;
short profile_dc_ceiling;
short profile_red_ceiling;
short profile_calc_ceiling;
short calc_ceiling_3m_incr;
Show ceilings for individual tissues I think that displaying tissue loadings either as pressure or as percentages is not very intuitive but that it makes much more sense when translated to ceiling depths. This change enables just that for the 16 tissues in our calculated ceiling and visualizes this in the profile graph. There is a checkbox in the preferences to turn this on. If enabled, all tissues having non-trivial ceilings are also shown in the info box. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-30 18:56:00 +00:00
short calc_all_tissues;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short gflow;
short gfhigh;
Make the map provider choice a preference Not all of the providers seem to work for me (Yahoo Satellite doesn't appear to give me any data), but for now I'll leave most of them in. We can later decide to offer only some of them. It might be more fun to be able to pick the provider directly from the map widget. But for now I kept this in the preferences which seemed to be a good place for it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-03-01 00:19:12 +00:00
int map_provider;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short display_invalid_dives;
short show_invalid;
Tie all the pieces together and make Preferences work as intended Not Apply / Close without Saving / OK work as designed. And things get correctly stored and reset. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-06-03 12:08:49 +00:00
short unit_system;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
struct units units;
Show sample time in the mouseover. This is really nice to have when looking at specific coutures of a dive or events. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-09-18 12:31:15 +00:00
short show_time;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
};
Tie all the pieces together and make Preferences work as intended Not Apply / Close without Saving / OK work as designed. And things get correctly stored and reset. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-06-03 12:08:49 +00:00
enum unit_system_values { METRIC, IMPERIAL, PERSONALIZE };
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
extern struct preferences prefs, default_prefs;
#define PP_GRAPHS_ENABLED (prefs.pp_graphs.po2 || prefs.pp_graphs.pn2 || prefs.pp_graphs.phe)
extern void subsurface_open_conf(void);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
extern void subsurface_set_conf(const char *name, const char *value);
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
extern void subsurface_set_conf_bool(const char *name, bool value);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
extern void subsurface_set_conf_int(const char *name, int value);
extern void subsurface_unset_conf(const char *name);
extern const char *subsurface_get_conf(const char *name);
extern int subsurface_get_conf_bool(const char *name);
extern int subsurface_get_conf_int(const char *name);
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
extern void subsurface_flush_conf(void);
extern void subsurface_close_conf(void);
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-12 01:07:22 +00:00
extern const char system_divelist_default_font[];
extern const char *system_default_filename();
Update preference saving for numeric values This does the "don't save defaults" for numeric values too. Also, move the preferences loading/saving to a new "prefs.c" file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 18:14:10 +00:00
extern void load_preferences(void);
extern void save_preferences(void);
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
}
#endif
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
#endif /* PREF_H */
Reference in a new issue Copy permalink