mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-11-30 22:20:21 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/pref.h

88 lines
1.6 KiB
C
Raw Normal View History

Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
#ifndef PREF_H
#define PREF_H
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
extern "C" {
#endif
Headers cleanup. Too much noise on the headers, this commit remove uneeded headers when they are uneeded. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-26 17:01:31 +00:00
#include "units.h"
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
/* can't use 'bool' for the boolean values - different size in C and C++ */
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-28 04:09:57 +00:00
typedef struct
{
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short po2;
short pn2;
short phe;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
double po2_threshold;
double pn2_threshold;
double phe_threshold;
} partial_pressure_graphs_t;
struct preferences {
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
const char *divelist_font;
const char *default_filename;
Create a text entry for default cylinder in preferences We don't do anything with this just yet. And frankly, a drop down of the cylinders that we know of would be even better. But hey, it's a start. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-23 23:34:17 +00:00
const char *default_cylinder;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
double font_size;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
partial_pressure_graphs_t pp_graphs;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short mod;
Be more consistent in partial pressure naming Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂. They all mean the same, but it's better to be consistent Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-22 14:41:44 +00:00
double modpO2;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short ead;
Renaming the prefs struct members to be consistent with the QSettings. -Renaming prefs members for consistency. -Changing references of QSettings to the prefs structure instead. -Removing unused functions in pref.h were left over from an old version. -Changing the data-type of bool members to short for consistency with other members. Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-16 20:03:44 +00:00
short dcceiling;
short redceiling;
short calcceiling;
short calcceiling3m;
short calcalltissues;
short calcndltts;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short gflow;
short gfhigh;
Correctly disable all animations This seems to be needed for the correct print of the profile, What was happening on the print code was that the profile even in print mode was doing animations, and we were getting a frame of it and trying to print it. Also, a bit of code cleanup. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-11 21:55:33 +00:00
bool animation;
Added a configuration option to have gf_low apply at max depth instead of at deepest ceiling. Signed-off-by: Patrick Valsecchi <patrick@thus.ch> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-20 15:11:22 +00:00
bool gf_low_at_maxdepth;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
short display_invalid_dives;
Tie all the pieces together and make Preferences work as intended Not Apply / Close without Saving / OK work as designed. And things get correctly stored and reset. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-06-03 12:08:49 +00:00
short unit_system;
Connect preferences to the rest of the code The biggest problem here was that bool has different sizes in C and C++ code. So using this in a structure shared between the two sides wasn't a smart idea. Instead I went with 'short', but that caused problems with Qt being to smart for its own good and not doing the right thing when dealing with 'boolean' settings and a short value. This may be something in the way I implemented things (as I doubt that something this fundamental would be broken) but the workaround implemented here (explicitly using 0 or 1 depending on the value of the boolean) seems to work. I also decided to get rid of the confusion of where gflow/gfhigh are floating point (0..1) and when they are integers (0..100). We now use integers anywhere outside of deco.c. I also applied some serious spelling corrections to the preferences dialog's ui file. Finally, this enables the code that selects which partial pressure graph to show. Still to do: font size, metric/imperial logic Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-05-28 18:21:27 +00:00
struct units units;
Show SAC in the mouseover. This is really nice to have when looking at specific parts of a dive. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-10-14 21:48:44 +00:00
short show_sac;
Renaming the prefs struct members to be consistent with the QSettings. -Renaming prefs members for consistency. -Changing references of QSettings to the prefs structure instead. -Removing unused functions in pref.h were left over from an old version. -Changing the data-type of bool members to short for consistency with other members. Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-16 20:03:44 +00:00
short display_unused_tanks;
short show_average_depth;
short zoomed_plot;
short hrgraph;
Make rulergraph a pref as well I don't see a point in treating it differently from the other graphs. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-05-05 22:53:46 +00:00
short rulergraph;
Removed the globals 'userid' and 'save_userid_local' variables This is a preferences setting, it should belong to the preferences structure. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-17 14:34:21 +00:00
short save_userid_local;
char *userid;
Hook up UI elements for ascent rates to planner That provides some UI elements that were recently introduced with function of allowing the ascent rates of the planner to be configured by the user. I tried to make it work both with senisble as well as with imperial units. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-24 22:08:36 +00:00
int ascrate75;
int ascrate50;
int ascratestops;
int ascratelast6m;
int descrate;
int bottompo2;
int decopo2;
Expose proxy settings into preferences struct Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-06-26 16:16:55 +00:00
int proxy_type;
char *proxy_host;
int proxy_port;
short proxy_auth;
char *proxy_user;
char *proxy_pass;
Planner: Add backgas breaks If the corresponding checkbox is checked the planner does interrupt pure O2 deco after 12min for 6min on cylinder 0. To make this work for air I removed the gasmix_is_null logic. I guess that makes the planner feature complete for the next release. [Dirk Hohndel: trivial merge into latest master] Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-02 20:07:38 +00:00
bool doo2breaks;
Move drop_stone_mode setting to prefs There is no reason to treat drop_stone_mode different from the rest of the planner settings, so move it to our prefs structure. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-09 21:37:30 +00:00
bool drop_stone_mode;
Added the toggle picture button and hoocked it up This patch adds the toggle picture button and hoocks it up with the rest of the code. I'v also changed a call from ProfileWidget because it caused errors on the ui generated code, where it would try to call an still-to-be instantiated object. Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-10 16:50:49 +00:00
bool show_pictures_in_profile;
Added a 'use default file' button on preferences. Added a 'Use default file' button on preferences in a way that doesn't clutters the interface. Fixes #630 Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-16 21:40:49 +00:00
bool use_default_file;
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
};
Massive automated whitespace cleanup I know everyone will hate it. Go ahead. Complain. Call me names. At least now things are consistent and reproducible. If you want changes, have your complaint come with a patch to scripts/whitespace.pl so that we can automate it. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-28 04:09:57 +00:00
enum unit_system_values {
METRIC,
IMPERIAL,
PERSONALIZE
};
Split up preference data structure definition into 'pref.h' .. and rename the badly named 'output_units/input_units' variables. We used to have this confusing thing where we had two different units (input vs output) that *look* like they are mirror images, but in fact "output_units" was the user units, and "input_units" are the XML parsing units. So this renames them to be clearer. "output_units" is now just "units" (it's the units a user would ever see), and "input_units" is now "xml_parsing_units" and set by the XML file parsers to reflect the units of the parsed file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 01:26:10 +00:00
extern struct preferences prefs, default_prefs;
#define PP_GRAPHS_ENABLED (prefs.pp_graphs.po2 || prefs.pp_graphs.pn2 || prefs.pp_graphs.phe)
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-12 01:07:22 +00:00
extern const char system_divelist_default_font[];
Fix system default font handling We didn't care about system default fonts and sizes, we just used the Qt default font. Due to how QFont is constructed, there was need to split font and font size. Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-03-21 17:56:10 +00:00
extern const int system_divelist_default_font_size;
Add default filename and divelist font to prefs structure .. and add the usual logic to not save the default values. This also simplifies the initial system-specific setup of both of these: since we have defaults for all the preferences that get set up at startup, we can just initialize those defaults to the system-specific fonts then and there. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-12 01:07:22 +00:00
extern const char *system_default_filename();
Update preference saving for numeric values This does the "don't save defaults" for numeric values too. Also, move the preferences loading/saving to a new "prefs.c" file. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-01-11 18:14:10 +00:00
Have some C++ file in the project Rename gtk-gui.c to qt-gui.cpp, and make the necessary changes so that the project still builds. Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
2013-04-01 10:51:49 +00:00
#ifdef __cplusplus
}
#endif
Put include guard to every header * ensure include guard to every header * comment endif guard block Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-02-11 18:14:46 +00:00
#endif // PREF_H
Reference in a new issue Copy permalink