mifr/subsurface
1
0
Fork 0
mirror of https://github.com/subsurface/subsurface.git synced 2024-11-30 22:20:21 +00:00
Code Issues Projects Releases Packages Wiki Activity
subsurface/tests/testplan.cpp

803 lines
27 KiB
C++
Raw Normal View History

Fix compilation with the new folder architecture A few more fixes for things that broke in commit 7be962bfc287 ("Move subsurface-core to core and qt-mobile to mobile-widgets"). [Dirk Hohndel: slightly edited and overlap with Linus' patch removed] Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-05 17:22:00 +00:00
#include "core/dive.h"
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
#include "testplan.h"
Fix compilation with the new folder architecture A few more fixes for things that broke in commit 7be962bfc287 ("Move subsurface-core to core and qt-mobile to mobile-widgets"). [Dirk Hohndel: slightly edited and overlap with Linus' patch removed] Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-05 17:22:00 +00:00
#include "core/planner.h"
#include "core/units.h"
#include "core/subsurfacestartup.h"
#include "core/qthelper.h"
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
#include <QDebug>
Fix typo in test and some numbers With these values I reproduce the runtimes from the UI. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-06 13:44:05 +00:00
#define DEBUG 1
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
// testing the dive plan algorithm
extern bool plan(struct diveplan *diveplan, char **cached_datap, bool is_planner, bool show_disclaimer);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
extern pressure_t first_ceiling_pressure;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
void setupPrefs()
{
Correctly copy preferences When just assigning one structure to the other we copy the string pointers. If we then modify those strings in the copy, we happily free the strings of the original. And then resetting the preferences equally happily reused those strings, pointing to long since freed memory. I think what I did now is excessive for the current use case in that it copies a ton of strings that are unset in the default_prefs. But I figured this is a rarely used function and I might as well do it correctly. Also, once we implement multi user support with per user preferences we will be copying completely populated preferences around (at least that's my guess). Fixes #940 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 09:15:38 +00:00
copy_prefs(&default_prefs, &prefs);
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
prefs.ascrate50 = feet_to_mm(30) / 60;
prefs.ascrate75 = prefs.ascrate50;
prefs.ascratestops = prefs.ascrate50;
prefs.ascratelast6m = feet_to_mm(10) / 60;
prefs.last_stop = true;
}
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
void setupPrefsVpmb()
{
Correctly copy preferences When just assigning one structure to the other we copy the string pointers. If we then modify those strings in the copy, we happily free the strings of the original. And then resetting the preferences equally happily reused those strings, pointing to long since freed memory. I think what I did now is excessive for the current use case in that it copies a ton of strings that are unset in the default_prefs. But I figured this is a rarely used function and I might as well do it correctly. Also, once we implement multi user support with per user preferences we will be copying completely populated preferences around (at least that's my guess). Fixes #940 Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 09:15:38 +00:00
copy_prefs(&default_prefs, &prefs);
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
prefs.ascrate50 = 10000 / 60;
prefs.ascrate75 = prefs.ascrate50;
prefs.ascratestops = prefs.ascrate50;
prefs.ascratelast6m = prefs.ascrate50;
prefs.descrate = 99000 / 60;
prefs.last_stop = false;
Rename prefs.deco_mode to prefs.planner_deco_mode This is to avoid confusion with planner.display_deco_mode. When accessing the "current deco mode" use the decoMode() helper function. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-07 02:11:19 +00:00
prefs.planner_deco_mode = VPMB;
Rename conservatism_level to vpmb_conservatism Make the variable purpose less ambiguous Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-24 08:02:07 +00:00
prefs.vpmb_conservatism = 0;
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
}
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
void setupPlan(struct diveplan *dp)
{
Fix typo in test and some numbers With these values I reproduce the runtimes from the UI. Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-06 13:44:05 +00:00
dp->salinity = 10300;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
dp->surface_pressure = 1013;
dp->gfhigh = 100;
dp->gflow = 100;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
struct gasmix bottomgas = { {150}, {450} };
struct gasmix ean36 = { {360}, {0} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 36000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
displayed_dive.cylinder[1].gasmix = ean36;
displayed_dive.cylinder[2].gasmix = oxygen;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(79, 260) * 60 / M_OR_FT(23, 75);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, 0, gas_mod(&ean36, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, droptime, M_OR_FT(79, 260), 0, 0, 1);
plan_add_segment(dp, 30*60 - droptime, M_OR_FT(79, 260), 0, 0, 1);
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
}
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
void setupPlanVpmb45m30mTx(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
dp->gfhigh = 100;
dp->gflow = 100;
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
struct gasmix bottomgas = { {210}, {350} };
struct gasmix ean50 = { {500}, {0} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
displayed_dive.cylinder[0].type.size.mliter = 24000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
displayed_dive.cylinder[1].gasmix = ean50;
displayed_dive.cylinder[2].gasmix = oxygen;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(45, 150) * 60 / M_OR_FT(23, 75);
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
plan_add_segment(dp, droptime, M_OR_FT(45, 150), 0, 0, 1);
plan_add_segment(dp, 30*60 - droptime, M_OR_FT(45, 150), 0, 0, 1);
}
void setupPlanVpmb60m10mTx(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
dp->gfhigh = 100;
dp->gflow = 100;
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
struct gasmix bottomgas = { {180}, {450} };
struct gasmix tx50_15 = { {500}, {150} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
displayed_dive.cylinder[0].type.size.mliter = 24000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
displayed_dive.cylinder[1].gasmix = tx50_15;
displayed_dive.cylinder[2].gasmix = oxygen;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(60, 200) * 60 / M_OR_FT(23, 75);
plan_add_segment(dp, 0, gas_mod(&tx50_15, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
plan_add_segment(dp, droptime, M_OR_FT(60, 200), 0, 0, 1);
plan_add_segment(dp, 10*60 - droptime, M_OR_FT(60, 200), 0, 0, 1);
}
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
void setupPlanVpmb60m30minAir(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
struct gasmix bottomgas = { {210}, {0} };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 100000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(60, 200) * 60 / M_OR_FT(99, 330);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(60, 200), 0, 0, 1);
plan_add_segment(dp, 30*60 - droptime, M_OR_FT(60, 200), 0, 0, 1);
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
void setupPlanVpmb60m30minEan50(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
struct gasmix bottomgas = { {210}, {0} };
struct gasmix ean50 = { {500}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 36000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
displayed_dive.cylinder[1].gasmix = ean50;
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(60, 200) * 60 / M_OR_FT(99, 330);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(60, 200), 0, 0, 1);
plan_add_segment(dp, 30*60 - droptime, M_OR_FT(60, 200), 0, 0, 1);
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
void setupPlanVpmb60m30minTx(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
struct gasmix bottomgas = { {180}, {450} };
struct gasmix ean50 = { {500}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 36000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
displayed_dive.cylinder[1].gasmix = ean50;
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(60, 200) * 60 / M_OR_FT(99, 330);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(60, 200), 0, 0, 1);
plan_add_segment(dp, 30*60 - droptime, M_OR_FT(60, 200), 0, 0, 1);
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
void setupPlanVpmbMultiLevelAir(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
struct gasmix bottomgas = { {210}, {0} };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 200000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(20, 66) * 60 / M_OR_FT(99, 330);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(20, 66), 0, 0, 1);
plan_add_segment(dp, 10*60 - droptime, M_OR_FT(20, 66), 0, 0, 1);
plan_add_segment(dp, 1*60, M_OR_FT(60, 200), 0, 0, 1);
plan_add_segment(dp, 29*60, M_OR_FT(60, 200), 0, 0, 1);
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
void setupPlanVpmb100m60min(struct diveplan *dp)
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
struct gasmix bottomgas = { {180}, {450} };
struct gasmix ean50 = { {500}, {0} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 200000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
displayed_dive.cylinder[1].gasmix = ean50;
displayed_dive.cylinder[2].gasmix = oxygen;
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(100, 330) * 60 / M_OR_FT(99, 330);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, droptime, M_OR_FT(100, 330), 0, 0, 1);
plan_add_segment(dp, 60*60 - droptime, M_OR_FT(100, 330), 0, 0, 1);
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
}
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
void setupPlanVpmb100m10min(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
struct gasmix bottomgas = { {180}, {450} };
struct gasmix ean50 = { {500}, {0} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 60000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
displayed_dive.cylinder[1].gasmix = ean50;
displayed_dive.cylinder[2].gasmix = oxygen;
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(100, 330) * 60 / M_OR_FT(99, 330);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, droptime, M_OR_FT(100, 330), 0, 0, 1);
plan_add_segment(dp, 10*60 - droptime, M_OR_FT(100, 330), 0, 0, 1);
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
}
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
void setupPlanVpmb30m20min(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
struct gasmix bottomgas = { {210}, {0} };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 36000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(30, 100) * 60 / M_OR_FT(18, 60);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(30, 100), 0, 0, 1);
plan_add_segment(dp, 20*60 - droptime, M_OR_FT(30, 100), 0, 0, 1);
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
}
void setupPlanVpmb100mTo70m30min(struct diveplan *dp)
{
dp->salinity = 10300;
dp->surface_pressure = 1013;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
dp->bottomsac = prefs.bottomsac;
dp->decosac = prefs.decosac;
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
struct gasmix bottomgas = { {120}, {650} };
struct gasmix tx21_35 = { {210}, {350} };
struct gasmix ean50 = { {500}, {0} };
struct gasmix oxygen = { {1000}, {0} };
pressure_t po2 = { 1600 };
displayed_dive.cylinder[0].gasmix = bottomgas;
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
displayed_dive.cylinder[0].type.size.mliter = 36000;
displayed_dive.cylinder[0].type.workingpressure.mbar = 232000;
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
displayed_dive.cylinder[1].gasmix = tx21_35;
displayed_dive.cylinder[2].gasmix = ean50;
displayed_dive.cylinder[3].gasmix = oxygen;
displayed_dive.surface_pressure.mbar = 1013;
reset_cylinders(&displayed_dive, true);
free_dps(dp);
int droptime = M_OR_FT(100, 330) * 60 / M_OR_FT(18, 60);
Set up gaslist only in the beginning of diveplan In the beginning of the diveplan, divedatapoints of zero duration indicate available gases with the depth giving the suggested switch depth. Zero-duration datapoints in the middle of the dive do not have this meaning and should thus be ignored when composing the gaslist. The tests should have these gas defining segments in the beginning. This fixes a problem when replanning a dive that would change to random gases during deco. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-09 17:12:44 +00:00
plan_add_segment(dp, 0, gas_mod(&tx21_35, po2, &displayed_dive, M_OR_FT(3,10)).mm, 1, 0, 1);
plan_add_segment(dp, 0, gas_mod(&ean50, po2, &displayed_dive, M_OR_FT(3,10)).mm, 2, 0, 1);
plan_add_segment(dp, 0, gas_mod(&oxygen, po2, &displayed_dive, M_OR_FT(3,10)).mm, 3, 0, 1);
Update TestPlan for divedatapoint storing cylinder id instead of gasmix Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-06 12:40:29 +00:00
plan_add_segment(dp, droptime, M_OR_FT(100, 330), 0, 0, 1);
plan_add_segment(dp, 20*60 - droptime, M_OR_FT(100, 330), 0, 0, 1);
plan_add_segment(dp, 3*60, M_OR_FT(70, 230), 0, 0, 1);
plan_add_segment(dp, (30 - 20 - 3) * 60, M_OR_FT(70, 230), 0, 0, 1);
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
}
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
/* We compare the calculated runtimes against two values:
* - Known runtime calculated by Subsurface previously (to detect if anything has changed)
* - Benchmark runtime (we should be close, but not always exactly the same)
*/
bool compareDecoTime(int actualRunTimeSeconds, int benchmarkRunTimeSeconds, int knownSsrfRunTimeSeconds)
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
{
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
bool result;
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
// If the calculated run time equals the expected run time, do a simple comparison
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
if (actualRunTimeSeconds == benchmarkRunTimeSeconds) {
TestPlan: Do not re-declare bool result Fixing this error makes TestPlan pass again. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-30 05:40:34 +00:00
result = true;
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
} else {
/* We want the difference between the expected and calculated total run time to be not more than
* 1% of total run time + 1 minute */
int permilDifferenceAllowed = 1 * 10;
int absoluteDifferenceAllowedSeconds = 60;
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
int totalDifferenceAllowed = 0.001 * permilDifferenceAllowed * benchmarkRunTimeSeconds + absoluteDifferenceAllowedSeconds;
int totalDifference = abs(actualRunTimeSeconds - benchmarkRunTimeSeconds);
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
Changed qInfo() to qDebug() ... as the former was introduced only in Qt 5.5 in order to make the test build also with 5.4 Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-31 20:12:36 +00:00
qDebug("Calculated run time = %d seconds", actualRunTimeSeconds);
qDebug("Expected run time = %d seconds", benchmarkRunTimeSeconds);
qDebug("Allowed time difference is %g percent plus %d seconds = %d seconds",
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
permilDifferenceAllowed * 0.1, absoluteDifferenceAllowedSeconds, totalDifferenceAllowed);
Changed qInfo() to qDebug() ... as the former was introduced only in Qt 5.5 in order to make the test build also with 5.4 Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-31 20:12:36 +00:00
qDebug("total difference = %d seconds", totalDifference);
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
TestPlan: Do not re-declare bool result Fixing this error makes TestPlan pass again. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-30 05:40:34 +00:00
result = (totalDifference <= totalDifferenceAllowed);
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
}
if ((knownSsrfRunTimeSeconds > 0) && (actualRunTimeSeconds != knownSsrfRunTimeSeconds)) {
QWARN("Calculated run time does not match known Subsurface runtime");
qWarning("Calculated runtime: %d", actualRunTimeSeconds);
qWarning("Known Subsurface runtime: %d", knownSsrfRunTimeSeconds);
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
}
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
return result;
Dive planner tests: pass dives that are close to expected duration Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 21:51:57 +00:00
}
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
void TestPlan::testMetric()
{
char *cache = NULL;
setupPrefs();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Rename prefs.deco_mode to prefs.planner_deco_mode This is to avoid confusion with planner.display_deco_mode. When accessing the "current deco mode" use the decoMode() helper function. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-07 02:11:19 +00:00
prefs.planner_deco_mode = BUEHLMANN;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
setupPlan(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 148l);
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
// check first gas change to EAN36 at 33m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 36);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 33000);
// check second gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
Fix typo in saturation/desatureation rates This patch eliminates the difference between the saturation and desaturation rates. This was probably once meant as a conservative measure but the desaturation rate was increased rather than the saturation rate (which is probably a typo, as reported by Stefan). Since there is no good basis for this anyway, this patch sets both factors to 1.0 (and if accepted the whole factor business should be removed). This makes our deco times slightly longer. But in the past, we had introduced a 1.2% fudge factor in the critical radius calculation to add conservatism and match the benchmark better. Removing this fudge factor brings us close to the benchmarks. Expected test values updated. Reported-by: Stefan <sjti@gmx.net> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 09:28:55 +00:00
// check expected run time of 109 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 109u * 60u, 109u * 60u));
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
}
void TestPlan::testImperial()
{
char *cache = NULL;
setupPrefs();
prefs.unit_system = IMPERIAL;
prefs.units.length = units::FEET;
Rename prefs.deco_mode to prefs.planner_deco_mode This is to avoid confusion with planner.display_deco_mode. When accessing the "current deco mode" use the decoMode() helper function. Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-07 02:11:19 +00:00
prefs.planner_deco_mode = BUEHLMANN;
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
setupPlan(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 154l);
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
// check first gas change to EAN36 at 33m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 36);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 33528);
// check second gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6096);
Fix typo in saturation/desatureation rates This patch eliminates the difference between the saturation and desaturation rates. This was probably once meant as a conservative measure but the desaturation rate was increased rather than the saturation rate (which is probably a typo, as reported by Stefan). Since there is no good basis for this anyway, this patch sets both factors to 1.0 (and if accepted the whole factor business should be removed). This makes our deco times slightly longer. But in the past, we had introduced a 1.2% fudge factor in the critical radius calculation to add conservatism and match the benchmark better. Removing this fudge factor brings us close to the benchmarks. Expected test values updated. Reported-by: Stefan <sjti@gmx.net> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 09:28:55 +00:00
// check expected run time of 111 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 111u * 60u - 2u, 111u * 60u - 2u));
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-07-04 16:12:54 +00:00
}
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
void TestPlan::testVpmbMetric45m30minTx()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = {};
setupPlanVpmb45m30mTx(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 108l);
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check benchmark run time of 141 minutes, and known Subsurface runtime of 139 minutes
//QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 141u * 60u + 20u, 139u * 60u + 20u));
}
void TestPlan::testVpmbMetric60m10minTx()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = {};
setupPlanVpmb60m10mTx(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 162l);
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check benchmark run time of 141 minutes, and known Subsurface runtime of 139 minutes
//QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 141u * 60u + 20u, 139u * 60u + 20u));
}
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
void TestPlan::testVpmbMetric60m30minAir()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
setupPlanVpmb60m30minAir(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 180l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
TestPlan: update known Subsurface runtimes The purpose of testing against known Subsurface runtimes is to warn (when test is run in verbose mode) if the runtime has altered. Before the next release, we should update the known Subsurface runtimes to match current behaviour, so we are alerted when we change something during the next release cycle. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 11:41:40 +00:00
// check benchmark run time of 141 minutes, and known Subsurface runtime of 139 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 141u * 60u + 20u, 139u * 60u + 20u));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
void TestPlan::testVpmbMetric60m30minEan50()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
setupPlanVpmb60m30minEan50(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 155l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
VPM-B Tests: Compare against known Subsurface runtime We should compare the calculated runtime against the runtime previously calculated by Subsurface, expecting them to match exactly, in order to detect if a change has been made. We still compare against a benchmark, allowing some difference. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 12:30:48 +00:00
// check benchmark run time of 95 minutes, and known Subsurface runtime of 96 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 95u * 60u + 20u, 96u * 60u + 20u));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
void TestPlan::testVpmbMetric60m30minTx()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
setupPlanVpmb60m30minTx(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 159l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
TestPlan: update known Subsurface runtimes The purpose of testing against known Subsurface runtimes is to warn (when test is run in verbose mode) if the runtime has altered. Before the next release, we should update the known Subsurface runtimes to match current behaviour, so we are alerted when we change something during the next release cycle. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 11:41:40 +00:00
// check benchmark run time of 89 minutes, and known Subsurface runtime of 89 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 89u * 60u + 20u, 89u * 60u + 20u));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
void TestPlan::testVpmbMetric100m60min()
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
setupPlanVpmb100m60min(&testPlan);
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 157l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check second gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
TestPlan: update known Subsurface runtimes The purpose of testing against known Subsurface runtimes is to warn (when test is run in verbose mode) if the runtime has altered. Before the next release, we should update the known Subsurface runtimes to match current behaviour, so we are alerted when we change something during the next release cycle. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 11:41:40 +00:00
// check benchmark run time of 311 minutes, and known Subsurface runtime of 314 minutes
Fix typo in saturation/desatureation rates This patch eliminates the difference between the saturation and desaturation rates. This was probably once meant as a conservative measure but the desaturation rate was increased rather than the saturation rate (which is probably a typo, as reported by Stefan). Since there is no good basis for this anyway, this patch sets both factors to 1.0 (and if accepted the whole factor business should be removed). This makes our deco times slightly longer. But in the past, we had introduced a 1.2% fudge factor in the critical radius calculation to add conservatism and match the benchmark better. Removing this fudge factor brings us close to the benchmarks. Expected test values updated. Reported-by: Stefan <sjti@gmx.net> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 09:28:55 +00:00
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 311u * 60u + 20u, 315u * 60u + 20u));
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
}
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
void TestPlan::testVpmbMetricMultiLevelAir()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
setupPlanVpmbMultiLevelAir(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 101l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
TestPlan: update known Subsurface runtimes The purpose of testing against known Subsurface runtimes is to warn (when test is run in verbose mode) if the runtime has altered. Before the next release, we should update the known Subsurface runtimes to match current behaviour, so we are alerted when we change something during the next release cycle. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 11:41:40 +00:00
// check benchmark run time of 167 minutes, and known Subsurface runtime of 169 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 167u * 60u + 20u, 169u * 60u + 20u));
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-25 14:33:17 +00:00
}
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
void TestPlan::testVpmbMetric100m10min()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
setupPlanVpmb100m10min(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 175l);
VPM-B Tests: Output first ceiling This is useful for determining why we calculate a difference profile Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-29 02:05:39 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check second gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
TestPlan: update known Subsurface runtimes The purpose of testing against known Subsurface runtimes is to warn (when test is run in verbose mode) if the runtime has altered. Before the next release, we should update the known Subsurface runtimes to match current behaviour, so we are alerted when we change something during the next release cycle. Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-10-06 11:41:40 +00:00
// check benchmark run time of 58 minutes, and known Subsurface runtime of 57 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 58u * 60u + 20u, 57u * 60u + 20u));
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-24 21:37:20 +00:00
}
Add a test for the VPM-B mode of the planner Signed-off-by: Robert C. Helling <helling@atdotde.de> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-08-23 14:08:04 +00:00
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
/* This tests that a previously calculated plan isn't affecting the calculations of the next plan.
* It is NOT a 'repetitive dive' test (i.e. with a surface interval and considering tissue
* saturation from the previous dive).
*/
void TestPlan::testVpmbMetricRepeat()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
Silence warnings in testplan.cpp Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-03-10 04:44:26 +00:00
struct diveplan testPlan = {};
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
setupPlanVpmb30m20min(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 61l);
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
Fix typo in saturation/desatureation rates This patch eliminates the difference between the saturation and desaturation rates. This was probably once meant as a conservative measure but the desaturation rate was increased rather than the saturation rate (which is probably a typo, as reported by Stefan). Since there is no good basis for this anyway, this patch sets both factors to 1.0 (and if accepted the whole factor business should be removed). This makes our deco times slightly longer. But in the past, we had introduced a 1.2% fudge factor in the critical radius calculation to add conservatism and match the benchmark better. Removing this fudge factor brings us close to the benchmarks. Expected test values updated. Reported-by: Stefan <sjti@gmx.net> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 09:28:55 +00:00
// check benchmark run time of 27 minutes, and known Subsurface runtime of 28 minutes
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 27u * 60u + 20u, 27u * 60u + 20u));
int firstDiveRunTimeSeconds = displayed_dive.dc.duration.seconds;
setupPlanVpmb100mTo70m30min(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 80l);
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check first gas change to 21/35 at 66m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->gas.mix.o2.permille, 210);
QCOMPARE(ev->gas.mix.he.permille, 350);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 66000);
// check second gas change to EAN50 at 21m
ev = ev->next;
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check third gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 3);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
// we don't have a benchmark, known Subsurface runtime is 126 minutes
Fix typo in saturation/desatureation rates This patch eliminates the difference between the saturation and desaturation rates. This was probably once meant as a conservative measure but the desaturation rate was increased rather than the saturation rate (which is probably a typo, as reported by Stefan). Since there is no good basis for this anyway, this patch sets both factors to 1.0 (and if accepted the whole factor business should be removed). This makes our deco times slightly longer. But in the past, we had introduced a 1.2% fudge factor in the critical radius calculation to add conservatism and match the benchmark better. Removing this fudge factor brings us close to the benchmarks. Expected test values updated. Reported-by: Stefan <sjti@gmx.net> Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 09:28:55 +00:00
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 127u * 60u + 20u, 127u * 60u + 20u));
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
setupPlanVpmb30m20min(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-15 21:28:36 +00:00
// check minimum gas result
dp = testPlan.dp;
while(!dp->minimum_gas.mbar && dp->next) dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 61l);
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2015-09-22 14:32:26 +00:00
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check runtime is exactly the same as the first time
int finalDiveRunTimeSeconds = displayed_dive.dc.duration.seconds;
QCOMPARE(finalDiveRunTimeSeconds, firstDiveRunTimeSeconds);
}
Our tests are actually GUILESS Signed-off-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-05 22:26:51 +00:00
QTEST_GUILESS_MAIN(TestPlan)
Reference in a new issue Copy permalink