2012-10-21 07:43:03 +00:00
|
|
|
Subsurface 2.1 User Manual
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
==========================
|
2012-10-21 07:43:03 +00:00
|
|
|
Jacco_van_Koll_and_Dirk_Hohndel
|
|
|
|
|
v0.1.0, October 2012
|
|
|
|
|
:Author Initials: JKO & DH
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
:toc:
|
|
|
|
|
:icons:
|
|
|
|
|
:numbered:
|
|
|
|
|
:website: http://subsurface.hohndel.org
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
Scope of this document is the usage of the program.
|
2011-12-12 20:03:04 +00:00
|
|
|
Please read the build manual for instructions how to build the
|
2011-12-26 11:08:34 +00:00
|
|
|
software and (if needed) its dependencies.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
|
|
|
|
Audience: Fun Divers, Tec Divers, Professional Divers
|
|
|
|
|
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_Introduction]]
|
|
|
|
|
Introduction:
|
|
|
|
|
-------------
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
Subsurface was started because of a lack of viable dive log software
|
|
|
|
|
on Linux. It turns out that the resulting software was easily ported
|
|
|
|
|
to Windows and Mac, but it clearly is a native Linux program first.
|
2012-10-21 07:43:03 +00:00
|
|
|
The program is under active development and at version 2.1 it is
|
2011-12-12 20:18:32 +00:00
|
|
|
already very usable for divers with supported dive-computers.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:47:42 +00:00
|
|
|
In this manual the Suunto Viper will be used for all examples.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-14 03:55:26 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_Requirements]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Requirements
|
|
|
|
|
------------
|
2011-12-12 20:18:32 +00:00
|
|
|
|
|
|
|
|
Before you are able to import information from your divecomputer into
|
|
|
|
|
Subsurface, you need some preparation. Do you have the following:
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
1. Your Divecomputer - Compatible with libdivecomputer (see list in <<AppendixA,Appendix A>>)
|
2011-12-12 20:03:04 +00:00
|
|
|
2. Communication interface - Cable to connect your divecomputer to your PC/Laptop/Netbook
|
2011-12-12 20:18:32 +00:00
|
|
|
3. Working installation of Subsurface
|
|
|
|
|
4. If needed, the manual of your divecomputer
|
|
|
|
|
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_StartUsing]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Start using the program
|
|
|
|
|
-----------------------
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
When you start the program for the first time, it shows no information
|
|
|
|
|
at all. This is because the program does not automatically load the
|
|
|
|
|
already available dive-log files.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
|
|
|
|
There is a menu, containing 'File', 'Log', 'Filter' and Help.
|
|
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
The screen is devided in 3 area's:
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
- Area with 4 tabs: Dive Notes, Equipment, Dive Info, and Stats
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Area next to the 3 tabs which will contain the dive profile
|
|
|
|
|
- Area with the dives (usually called dive list) which can be sorted by number, date, etc.
|
2011-12-12 20:18:32 +00:00
|
|
|
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_ImportNewDives]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Import new dives from your divecomputer
|
|
|
|
|
---------------------------------------
|
2011-12-12 20:18:32 +00:00
|
|
|
|
|
|
|
|
Before you start fiddeling around with your divecomputer, note that
|
2011-12-12 20:47:42 +00:00
|
|
|
there are divecomputers that consume more power when they are in the
|
|
|
|
|
PC-Communication mode. This could drain your battery. Therefor, ensure
|
|
|
|
|
if your computer is recharging when connecting to the USB port. The
|
|
|
|
|
Suunto Viper does not recharge trough the USB connection. Please
|
|
|
|
|
consult the manual of your divecomputer if you are unsure if it will
|
|
|
|
|
be recharged when connected to the USB port.
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
Now it is time to hook up your divecomputer to your PC:
|
2011-12-12 20:18:32 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Make sure that your OS has the required drivers installed
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
* On Linux this means you need to have the correct kernel
|
|
|
|
|
module loaded. Most distributions will do this automatically
|
|
|
|
|
for you.
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
* On Windows, the OS should offer to download the correct
|
|
|
|
|
driver when you connect to the USB port.
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
* On a Mac you at times have to manually hunt for the correct
|
|
|
|
|
driver. For example the correct driver for the Mares Puck
|
|
|
|
|
devices can be found as Mac_OSX_VCP_Driver.zip at
|
|
|
|
|
http://www.silabs.com/support/pages/support.aspx?ProductFamily=USB+Bridges
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Connect your interface cable to a free USB port
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Put your divecomputer into PC Communication mode. (For Suunto Viper, press Mode - 1 Memory - 3 TR-PC)
|
2011-12-12 20:47:42 +00:00
|
|
|
(You should consult the manual of your specific divecomputer for your brand and type)
|
2011-12-14 04:15:19 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
- Go in Subsurface to 'Log - Download From Dive Computer'
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
* Within the popup, under Dive computer, choose your brand and type. Here we choose Suunto Vyper.
|
|
|
|
|
* Change the devicename under which your interface is connected.
|
|
|
|
|
** On Linux, default is /dev/ttyUSB0
|
|
|
|
|
** On Windows, default is COM3
|
|
|
|
|
** On Mac, default is ... specific to the dive computer
|
2011-12-14 04:15:19 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
* Click the 'OK' button.
|
2011-12-12 20:18:32 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Now watch how your data is retrieved from your divecomputer!
|
|
|
|
|
Depending on your type of computer and/or number of dives, this
|
|
|
|
|
could take some time. Please be patient.
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2011-12-12 20:47:42 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_ViewingLogs]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Viewing and completing your logs
|
|
|
|
|
--------------------------------
|
2011-12-12 20:47:42 +00:00
|
|
|
|
|
|
|
|
When all data from your divecomputer is transferred, you will see a
|
|
|
|
|
listing of your dives in Area 3.
|
|
|
|
|
|
|
|
|
|
An example:
|
|
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
On Sunday Oct 23, 2011 you made a dive.
|
2011-12-12 22:37:07 +00:00
|
|
|
In the log line of this dive, you see the following information:
|
2012-01-02 01:41:05 +00:00
|
|
|
[width="70%",cols="<5%,10%,<20%,<65%",grid="none",frame="none",style="monospaced"]
|
|
|
|
|
|===============================================================================
|
|
|
|
|
|| # | 12 | Dive number
|
|
|
|
|
|| Date | Sun, Oct 23, 2011 10:50 | Date and time of your dive
|
|
|
|
|
|| * | | Your rating (none at this time)
|
|
|
|
|
|| m | 12.8 | Your maximum depth in meters
|
|
|
|
|
|| min | 31:20 | Your dive-time in minutes and seconds
|
|
|
|
|
|| Deg. C | 13.0 | Lowest water temperature during your dive
|
|
|
|
|
|| Cyl | | Your used cylinder (none at this time)
|
|
|
|
|
|| O2% | air | What type of mixture
|
|
|
|
|
|| SAC | | SAC (none at this time)
|
|
|
|
|
|| Location | | Where you performed your dive (empty)
|
|
|
|
|
|===============================================================================
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
As you can see, some information is already there because it is
|
|
|
|
|
retrieved from your divecomputer. Some information is waiting for
|
|
|
|
|
you to be added. By double clicking on this dive, you can view and
|
|
|
|
|
complete the log.
|
|
|
|
|
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_EditDiveInfo]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Edit the dive info
|
|
|
|
|
------------------
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
When you double click on the dive log line, the editor window
|
|
|
|
|
opens. Now you can add information that is missing. Let start with
|
|
|
|
|
completing the example:
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2012-01-02 01:41:05 +00:00
|
|
|
You double clicked on dive #12, as described in <<S_ViewingLogs,Viewing and
|
|
|
|
|
completing your logs>>. The Dive Info window pops up and you will see
|
2011-12-12 22:45:27 +00:00
|
|
|
the following:
|
2012-01-02 01:41:05 +00:00
|
|
|
[horizontal]
|
|
|
|
|
*Location*:: An input where you can enter your new location, or you can choose with the pull-down previous locations
|
|
|
|
|
*Dive Master*:: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name
|
|
|
|
|
*Buddy*:: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name
|
|
|
|
|
*Rating*:: A pull-down where you can rate your dive.
|
2012-10-21 07:43:03 +00:00
|
|
|
*Suit*:: An input where you can track the exposure protection suit you were wearing
|
2012-01-02 01:41:05 +00:00
|
|
|
*Notes*:: A free input where you can enter information about your dive. What you've seen, etc.
|
2011-12-12 22:37:07 +00:00
|
|
|
|
|
|
|
|
In this example we use the following information:
|
2012-01-02 01:41:05 +00:00
|
|
|
[horizontal]
|
|
|
|
|
*Location*:: Oostvoornse Meer
|
|
|
|
|
*Dive Master*:: S. de Vries
|
|
|
|
|
*Buddy*:: S. de Vries
|
|
|
|
|
*Rating*:: 3 stars
|
2012-10-21 07:43:03 +00:00
|
|
|
*Suit*:: 7mm wet
|
2012-01-02 01:41:05 +00:00
|
|
|
*Notes*:: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive. +
|
|
|
|
|
Made movie with headcam.
|
2011-12-12 22:37:07 +00:00
|
|
|
|
|
|
|
|
Now don't press ok yet!
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_EditEquipmentInfo]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Edit equipment info
|
|
|
|
|
-------------------
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
You also want to edit your Cylinder information. And in the
|
|
|
|
|
<<S_EditDiveInfo, previous chapter>>, this was not edited. There is
|
|
|
|
|
still another item to edit in the Dive Info screen:
|
2011-12-12 22:37:07 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Cylinder: A double-click fieldset. Here you can edit your Cylinder information
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
So, when you double click on the cylinder info, you get another
|
|
|
|
|
popup. This popup gives you the following:
|
2011-12-12 22:37:07 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Cylinder: Pull-down where you can choose your Cylinder, or add your own
|
2012-01-02 01:41:05 +00:00
|
|
|
- Size: The volume if not `filled'
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Pressure: The maximum pressure of this Cylinder
|
|
|
|
|
- Optional:
|
|
|
|
|
* Start Pressure: What was the pressure starting the dive
|
|
|
|
|
* End Pressure: What was the pressure ending the dive
|
|
|
|
|
* Nitrox: What was the percentage of blend
|
2011-12-12 22:37:07 +00:00
|
|
|
|
|
|
|
|
Now we are going to enter the data:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Cylinder: 15.0 l
|
|
|
|
|
- Size: 15.0
|
|
|
|
|
- Pressure: 220
|
2011-12-12 22:45:27 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Now tick the option for Start & End pressure
|
2011-12-12 22:45:27 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Start Pressure: 180
|
|
|
|
|
- End Pressure: 60
|
|
|
|
|
- Press Ok
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
In very much the same way you can enter the weight you were carrying on
|
|
|
|
|
the dive. Subsurface tracks the following:
|
|
|
|
|
|
|
|
|
|
- Type: Specific type of weight system, like weight belt, integrated pockets
|
|
|
|
|
- Weight: Amount of weight (by default in kg, but can be switched to use lbs)
|
|
|
|
|
|
|
|
|
|
Enter the following data:
|
|
|
|
|
|
|
|
|
|
- Type: Integrated
|
|
|
|
|
- weight: 13kg
|
|
|
|
|
- Press Ok
|
|
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
Now your dive information for this dive is complete. You can now press
|
|
|
|
|
ok in the Dive Info screen and view the results.
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_AddingEquipment]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Adding equipment info
|
|
|
|
|
---------------------
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
In Area with the 3 tabs there is the tab Equipment. With this tab, you
|
2012-10-21 07:43:03 +00:00
|
|
|
can add Cylinders and Weight Systems (just like in the previous dialog).
|
|
|
|
|
We are going to add an additional Cylinder:
|
2011-12-12 22:37:07 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- In the main screen, click on the Equipment tab. This shows your
|
|
|
|
|
Cylinder you added in 7.
|
|
|
|
|
|
|
|
|
|
- Now press the Add button and the Cylinder popup comes back.
|
2011-12-12 22:37:07 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Just like you added your Cylinder information in 7. Edit equipment
|
|
|
|
|
info, you add your cylinder information for the second Cylinder.
|
|
|
|
|
Fill in all the information about this Cylinder and press OK.
|
2011-12-14 03:55:26 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_ViewInfoStats]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
View info & Stats
|
|
|
|
|
-----------------
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
After adding all the information, you can use the tab Dive Info and
|
|
|
|
|
the Stats tab. These tabs will provide you with all the (statistical and
|
2011-12-12 22:45:27 +00:00
|
|
|
calculated) information regarding your dive.
|
2011-12-12 22:37:07 +00:00
|
|
|
|
|
|
|
|
The information contains:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Dive Info:
|
2011-12-12 22:45:27 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
** Date: Date and time of your dive
|
|
|
|
|
** Dive Time: Duration of your dive
|
|
|
|
|
** Surf Intv: Interval between previous dive and this dive
|
|
|
|
|
** Max Depth: Maximum depth of this dive
|
|
|
|
|
** Avg Depth: The average depth of this dive
|
|
|
|
|
** Water Temp: Lowest temperature of the water
|
|
|
|
|
** SAC: The amount of Surface Air Consumption liters per minute
|
|
|
|
|
** OTU: The Oxygen Toxicity Units of this dive
|
|
|
|
|
** O2/He: Amount of Oxygen/Helium
|
|
|
|
|
** Gas Used: The total volume of gas used during this dive
|
2011-12-12 22:45:27 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Statistics:
|
2011-12-12 22:45:27 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
** Dive: Number of dives covered (usually one, unless you select more dives)
|
|
|
|
|
** Max/Min/Avg Temp: Corresponding temperature of the dives covered
|
|
|
|
|
** Total time: Total time of the covered dives together, calculated
|
|
|
|
|
** Avg/Long/Short Time: The average / longest / shortes divetime of the covered dives, calculated
|
|
|
|
|
** Max/Min/Avg Depth: The maximum / minimum / average depth of the covered dives
|
|
|
|
|
** Max SAC: Highest / lowest / average Surface Air Consumption of your covered dives
|
2011-12-12 22:37:07 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_SettingUpPreferences]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Setting up preferences
|
|
|
|
|
----------------------
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2011-12-12 20:47:42 +00:00
|
|
|
Subsurface has the ability to modify the preferences you want. By
|
|
|
|
|
using menu 'File - Preferences' you will be presented a popup with the
|
|
|
|
|
'Units'. You are free to choose what is your preference, with other
|
|
|
|
|
words, use Metric or Imperial.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
|
|
|
|
You can set the following options:
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Depth: Your diving depth in Meters or Feet
|
|
|
|
|
- Pressure: The pressure of your tank(s) in Bar/Ato or PSI (Pressure Square Inch)
|
|
|
|
|
- Volume: The volume of your tank(s) in Liter or CuFt (Cubic Feet) (At sea-level pressure)
|
|
|
|
|
- Temperature: The temperature of the water in Celcius or Fahrenheit
|
2012-10-21 07:43:03 +00:00
|
|
|
- Weight: The weight of your weightsystem in kg or lbs
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2011-12-12 22:45:27 +00:00
|
|
|
In the main screen, you did see in Area 3, some information. In the
|
|
|
|
|
Columns options, you can enable/disable options you would like to show
|
|
|
|
|
there:
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Show Temp: Shows the temperature of your dive
|
|
|
|
|
- Show Cyl: Shows the cylinder(s) of your dive
|
|
|
|
|
- Show O2%: Shows the O2% of your dive
|
|
|
|
|
- Show SAC: Shows the SAC of your dive (Surface Air Consumption)
|
|
|
|
|
- Show OTU: Shows the OTU of your dive (Oxygen Toxicity Units)
|
2012-10-21 07:43:03 +00:00
|
|
|
- Show Weight: Shows the total weight carried
|
|
|
|
|
- Show Suit: Shows the suit you were wearing
|
|
|
|
|
|
|
|
|
|
You can also change the default setting whether your dives are grouped
|
|
|
|
|
by dive trips (the algorithm maskes educated guesses) or whether you'd
|
|
|
|
|
prefer to do any grouping of dive trips manually
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
And, you can change the font used in the dive list,
|
2011-12-12 20:03:04 +00:00
|
|
|
|
|
|
|
|
I will give an example here:
|
|
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
I am a diver in The Netherlands, using the Metric System. Therefor, I
|
|
|
|
|
go to the menu File, choose Preferences here. In the Units section, I
|
2012-03-22 11:34:41 +00:00
|
|
|
use the following:
|
2011-12-12 20:18:32 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Depth: Meter
|
|
|
|
|
- Pressure: Bar
|
|
|
|
|
- Volume: Liter
|
|
|
|
|
- Temperature: Celcius
|
2012-10-21 07:43:03 +00:00
|
|
|
- Weight: kg
|
2011-12-12 20:18:32 +00:00
|
|
|
|
2011-12-12 20:03:04 +00:00
|
|
|
I would like to see the:
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
- Temperature
|
|
|
|
|
- Show Cyl
|
|
|
|
|
- Show O2%
|
|
|
|
|
- Show SAC
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
As a beginning diver, I don't need to track my OTUs. So I leave this
|
|
|
|
|
one not enabled.
|
2011-12-12 20:03:04 +00:00
|
|
|
|
2011-12-12 20:18:32 +00:00
|
|
|
Clicking OK on the dialog stores these settings.
|
2011-12-14 03:55:26 +00:00
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_HowFindDeviceName]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
How to find the Device Name
|
|
|
|
|
---------------------------
|
2011-12-14 03:55:26 +00:00
|
|
|
|
|
|
|
|
When you connect your divecomputer by using an USB connector, most of the
|
2011-12-24 11:17:46 +00:00
|
|
|
time, the default of '/dev/ttyUSB0' should work. But if you have other
|
2011-12-14 03:55:26 +00:00
|
|
|
Serial to USB devices, this can be different because '/dev/ttyUSB0' is
|
|
|
|
|
already in use.
|
|
|
|
|
|
|
|
|
|
One of the ways to find out what your dive name is:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Disconnect your usb cable of your dive computer
|
|
|
|
|
- Open a terminal
|
|
|
|
|
- Type the command: 'dmesg' and press enter
|
|
|
|
|
- Plug in your usb cable of your divecomputer
|
|
|
|
|
- Type the command: 'dmesg' and press enter
|
2011-12-14 03:55:26 +00:00
|
|
|
|
|
|
|
|
Within your terminal you should see a message similair to this one:
|
|
|
|
|
|
|
|
|
|
usb 2-1.1: new full speed USB device number 14 using ehci_hcd
|
|
|
|
|
usbcore: registered new interface driver usbserial
|
|
|
|
|
USB Serial support registered for generic
|
|
|
|
|
usbcore: registered new interface driver usbserial_generic
|
|
|
|
|
usbserial: USB Serial Driver core
|
|
|
|
|
USB Serial support registered for FTDI USB Serial Device
|
|
|
|
|
ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
|
|
|
|
|
usb 2-1.1: Detected FT232BM
|
|
|
|
|
usb 2-1.1: Number of endpoints 2
|
|
|
|
|
usb 2-1.1: Endpoint 1 MaxPacketSize 64
|
|
|
|
|
usb 2-1.1: Endpoint 2 MaxPacketSize 64
|
|
|
|
|
usb 2-1.1: Setting MaxPacketSize 64
|
|
|
|
|
usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB3
|
|
|
|
|
usbcore: registered new interface driver ftdi_sio
|
|
|
|
|
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
|
|
|
|
|
|
|
|
|
|
You see that in the third line from the bottom, the usb adapter is
|
|
|
|
|
detected and is connected to 'ttyUSB3'. Now you use this information in
|
|
|
|
|
the import settings as '/dev/ttyUSB3'. Your divecomputer interface is
|
|
|
|
|
connected and you should be able to import your dives.
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_ImportingDivesJDivelog]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Importing dives from JDivelog
|
|
|
|
|
-----------------------------
|
2011-12-16 19:14:15 +00:00
|
|
|
|
|
|
|
|
Maybe you have been using JDivelog and you have a lot of dives logged in
|
|
|
|
|
this program. You don't have to type all information by hand into
|
|
|
|
|
Subsurface, because you can import your divelogs from JDivelog.
|
|
|
|
|
|
2012-03-22 11:34:41 +00:00
|
|
|
JDivelog stores its information into files with the extension of .jlb.
|
2011-12-16 19:14:15 +00:00
|
|
|
These .jlb contain all the information that has been stored, except your
|
|
|
|
|
images in xml format.
|
|
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
By using the menu 'File - Import XML File(s)' you get a popup asking
|
|
|
|
|
for the filename. To import your JDivelog file(s) do the following:
|
2011-12-16 19:14:15 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
- Open 'File - Import XML Files(s)' on the menu
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Browse your directories to the location where your *.jlb file is
|
|
|
|
|
- Select your existing *.jlb file and click 'open'
|
|
|
|
|
- Click the OK button in the popup
|
2011-12-16 19:14:15 +00:00
|
|
|
|
|
|
|
|
After a few moments, you see your existing logs in Subsurface. Now you can
|
2012-01-02 00:52:45 +00:00
|
|
|
edit your dives like explained in <<S_EditDiveInfo, chapter 6>>.
|
2011-12-16 19:14:15 +00:00
|
|
|
|
2011-12-23 18:43:58 +00:00
|
|
|
Information that is imported from JDivelog into the location field:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Extended dive location information
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
Information that is merged into the location or notes field:
|
2011-12-16 19:14:15 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Used amount of weight
|
|
|
|
|
- Used type of suit
|
|
|
|
|
- Used type of gloves
|
|
|
|
|
- Type of dive
|
|
|
|
|
- Dive activity
|
2011-12-16 19:14:15 +00:00
|
|
|
|
2012-03-22 11:34:41 +00:00
|
|
|
Alternatively, you can start subsurface with the --import command line
|
2011-12-16 21:11:29 +00:00
|
|
|
which will have the same effect:
|
|
|
|
|
|
|
|
|
|
subsurface MyDives.xml --import JDivelogDives.jlb
|
|
|
|
|
|
|
|
|
|
will open your divelog (assuming that's called MyDives.xml) and then
|
|
|
|
|
import the dives from JdivelogDives.jlb. You can now save the combined
|
|
|
|
|
divelog back as MyDives.xml.
|
|
|
|
|
|
|
|
|
|
Subsurface will similarly import xml exports from DivingLog as well as
|
|
|
|
|
Suunto DiveManager.
|
|
|
|
|
|
|
|
|
|
When importing dives subsurface tries to detect multiple records for
|
|
|
|
|
the same dive and merges the information as best as it can. So as long
|
|
|
|
|
as there are no time zone issues (or other reasons that would cause the
|
|
|
|
|
beginning time of the dives to be substantially different) subsurface
|
|
|
|
|
will not create duplicate entries.
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_ImportingDivesSuunto]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Importing dives from Suunto Divemanager 3.*
|
|
|
|
|
-------------------------------------------
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
Before you can start importing dives from Suunto Divemanager, you first
|
|
|
|
|
have to export the dives you want to import. Subsurface does not import
|
|
|
|
|
directly from the Suunto Divemanager log files. The following procedures
|
|
|
|
|
unpacking instructions for Linux and Windows.
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Export from Suunto Divemanager
|
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
|
|
|
|
|
- Start Suunto Divemanager and login with the name containing the logs
|
|
|
|
|
- Do not start the import wizard to import dives from your computer.
|
|
|
|
|
- In the navigation tree on the left side of the program-window, select your dives.
|
|
|
|
|
- Within the list of dives, select the dives you would like to import later:
|
|
|
|
|
* To select certain dives: hold ctrl and point & click the dive
|
|
|
|
|
* To select all dives: Select the first dive, hold down shift and select the last dive
|
|
|
|
|
- With the dives marked, use the program menu 'File - Export'
|
|
|
|
|
- The export popup will show
|
|
|
|
|
- Within this popup, there is one field called Export Path.
|
|
|
|
|
* Click the button browse next to the field Export Path
|
|
|
|
|
** A file-manager like window pops up
|
|
|
|
|
** Navigate to the directory where you want to store the Divelog.SDE file
|
|
|
|
|
** Optional change the name of the file you want to save
|
|
|
|
|
** Click 'Save'
|
|
|
|
|
* You are back in the Export popup. Press the button 'Export'
|
|
|
|
|
- Your dives are now exported to the file Divelogs.SDE.
|
|
|
|
|
|
|
|
|
|
Unpacking the Divelogs.SDE on Windows
|
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
Renaming your file to a .zip:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Use the filemanager (explorer) and navigate to your Divelogs.SDE file
|
|
|
|
|
- Right click on the Divelogs.SDE file and choose 'Rename'
|
|
|
|
|
* Change the name into Divelogs.SDE.zip
|
|
|
|
|
* Press enter when done. A warning popup shows:
|
|
|
|
|
|
|
|
|
|
The file could be unusable when changing the extension. Are you sure:
|
|
|
|
|
Press OK.
|
|
|
|
|
|
|
|
|
|
* Your filemanager will show now the filename Divelogs.SDE.zip
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
When you double click your Divelogs.SDE.zip file, your preferred archiving
|
|
|
|
|
tool will start and show you the list of xml files that are in the zip
|
|
|
|
|
archive. Select all the xml files and extract them to a place where you
|
|
|
|
|
can find them later in the process.
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Unpacking the Divelogs.SDE on Linux
|
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
The assumption is that you have exported your Divelogs.SDE on a Windows
|
|
|
|
|
system. You have to transfer the file to a location where you can read it
|
2012-03-22 11:34:41 +00:00
|
|
|
from within your Linux environment. You can use file-transfer, shared
|
2011-12-23 18:43:58 +00:00
|
|
|
storage or an USB storage device to do this.
|
|
|
|
|
The example uses an USB storage:
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Insert your USB storage into your Windows computer
|
|
|
|
|
- Use the filemanager (explorer) to navigate to the location where your Divelogs.SDE file is located
|
|
|
|
|
- Copy the file to your USB storage:
|
|
|
|
|
* Select the file by 1 click
|
|
|
|
|
* Press Ctrl+c
|
|
|
|
|
* Navigate to your USB Storage
|
|
|
|
|
* Press Ctrl+v
|
|
|
|
|
- Disconnect your USB storage by right clicking your USB storage in the explorer and choose Eject
|
|
|
|
|
- Insert your USB storage into your Linux computer
|
|
|
|
|
- Use your favourite filemanager to navigate to your USB storage
|
|
|
|
|
- Copy the file to /tmp by:
|
|
|
|
|
* Right click on the file
|
|
|
|
|
* select copy
|
|
|
|
|
* navigate to /tmp
|
|
|
|
|
* press Ctrl+v or use the menu 'Edit - Paste'
|
|
|
|
|
- The file is now transfered to /tmp
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
Now the file is in /tmp, we can extract the xml files from it. You can do
|
2012-01-02 00:52:45 +00:00
|
|
|
this by hand, or use the example script in <<AppendixB,Appendix B>>.
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
To extract the xml files, we need to open a terminal and use the following
|
|
|
|
|
commands:
|
|
|
|
|
|
|
|
|
|
cd /tmp
|
|
|
|
|
mkdir suunto
|
|
|
|
|
cd suunto
|
|
|
|
|
unzip ../Divelogs.SDE
|
|
|
|
|
|
|
|
|
|
Your divelogs have now been extracted from the Divelogs.SDE file and you
|
|
|
|
|
can import them with the command:
|
|
|
|
|
|
|
|
|
|
subsurface *.xml
|
|
|
|
|
|
|
|
|
|
And with the menu 'File - Save' you can save your dives into the
|
|
|
|
|
Subsurface format.
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[S_Menu]]
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
The menu and sub-menus
|
|
|
|
|
----------------------
|
2011-12-27 00:14:44 +00:00
|
|
|
|
|
|
|
|
Within Subsurface, there are several menu and sub-menu options. All of
|
|
|
|
|
those will be described here with their function.
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
The file menu
|
|
|
|
|
~~~~~~~~~~~~~
|
2011-12-27 00:14:44 +00:00
|
|
|
|
|
|
|
|
The file menu is used for the following menu options:
|
|
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
- New:: Close your current divelog (saving if necessary) and start a new empty dive list
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Open:: Open your saved Subsurface xml file(s)
|
|
|
|
|
- Save:: Save your current divelogs or changes you made to your divelogs
|
2012-10-21 07:43:03 +00:00
|
|
|
- Save As:: Save your current divelogs or changes you made to your divelogs under a different name
|
|
|
|
|
- Close:: Close your current divelog, saving as necessary
|
|
|
|
|
- Import XML File(s):: Import your dives from files exported by other divelogs
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Print:: Print your current divelog profiles and information about the dive
|
2012-01-02 01:41:05 +00:00
|
|
|
- Preferences:: Set your preferences as described in <<S_SettingUpPreferences,chapter 10>>
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Quit:: Quit the program
|
2011-12-27 00:14:44 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
The Log menu
|
|
|
|
|
~~~~~~~~~~~~
|
2011-12-27 00:14:44 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
Within the Log menu, you will find the following sub-items:
|
2011-12-27 00:14:44 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
- Download From Dive Computer:: Allows you to download dive information from your dive computer
|
|
|
|
|
- Add Dive:: Manually add a dive that you cannot download from an existing computer
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- Renumber:: This option provides you with a popup. Within this
|
2011-12-27 00:14:44 +00:00
|
|
|
popup you can choose what the first number of your dives should be
|
|
|
|
|
for this set of dives.
|
2012-10-21 07:43:03 +00:00
|
|
|
- Autogroup:: Toggle the auto group setting (see the discussion in the <<S_SettingUpPreferences,chapter 10>>)
|
|
|
|
|
|
|
|
|
|
- Toggle Zoom:: The dive profile tries to convey some first glance information about
|
|
|
|
|
the depth of a dive - so the vertical scaling of the profile always
|
|
|
|
|
show a minimum of 30m / 90ft. This can be changed to be only 10m / 30ft.
|
|
|
|
|
- Yearly Statistics: Contrary to the Statistics in the main display, these are purely calendar based.
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
- View:: This is a submenu containing:
|
|
|
|
|
* List:: Show only the list of dives you have made
|
|
|
|
|
* Profile:: Show only the dive profile of the selected dive
|
|
|
|
|
* Info:: Show only the 3 tab information screen
|
|
|
|
|
* Three:: Show the 'default' 3 screen setup
|
2011-12-27 00:14:44 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
The Filter menu
|
|
|
|
|
~~~~~~~~~~~~~~~
|
2011-12-27 00:14:44 +00:00
|
|
|
|
|
|
|
|
This menu gives you the choice to enable or disable Events for the
|
|
|
|
|
selected divelog(s). At this time, you can enable or disable ascent.
|
|
|
|
|
When you enable ascent for your dives, within the dive profile, a yellow
|
|
|
|
|
marker with exclamation sign (!) will show on the points where you have
|
|
|
|
|
ascented.
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
The Help menu
|
|
|
|
|
~~~~~~~~~~~~~
|
2011-12-27 00:14:44 +00:00
|
|
|
|
|
|
|
|
The Help menu shows only the About, which contains the version and author
|
|
|
|
|
information and License button.
|
|
|
|
|
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[AppendixA]]
|
|
|
|
|
Appendix A: Supported Dive Computers
|
|
|
|
|
------------------------------------
|
2011-12-14 03:55:26 +00:00
|
|
|
|
|
|
|
|
The use of libdivecomputer provides the support for divecomputers. Within
|
|
|
|
|
the list of computers in the 'File - import' menu, you will see a listing
|
|
|
|
|
of divecomputers. This list is covering a compatible set. Please check
|
|
|
|
|
your users manual to check if your computer will be supported.
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Supported divecomputers::
|
2011-12-14 03:55:26 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Atomics::
|
2011-12-14 03:55:26 +00:00
|
|
|
Cobalt
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Cressi::
|
2011-12-14 03:55:26 +00:00
|
|
|
Edi
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Mares::
|
2011-12-14 03:55:26 +00:00
|
|
|
Icon HD
|
|
|
|
|
Nemo
|
|
|
|
|
Puck
|
2011-12-16 21:11:29 +00:00
|
|
|
Air
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Oceanic::
|
2011-12-14 03:55:26 +00:00
|
|
|
Veo250
|
|
|
|
|
VT Pro
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
OSTC::
|
2011-12-14 03:55:26 +00:00
|
|
|
DR5
|
|
|
|
|
2N
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Reefnet::
|
2011-12-14 03:55:26 +00:00
|
|
|
Sensus
|
|
|
|
|
Sensus Pro
|
|
|
|
|
Sensus Ultra
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Suunto::
|
2011-12-16 19:14:15 +00:00
|
|
|
Cobra
|
|
|
|
|
2
|
|
|
|
|
3
|
|
|
|
|
D3
|
2011-12-14 03:55:26 +00:00
|
|
|
D9
|
2011-12-16 19:14:15 +00:00
|
|
|
D4
|
|
|
|
|
D4i
|
|
|
|
|
D6
|
|
|
|
|
D6i
|
|
|
|
|
D9tx
|
2011-12-14 03:55:26 +00:00
|
|
|
Eon
|
2011-12-16 19:14:15 +00:00
|
|
|
Gekko
|
|
|
|
|
HelO2
|
|
|
|
|
Mosquito
|
2011-12-14 03:55:26 +00:00
|
|
|
Solution
|
2011-12-16 19:14:15 +00:00
|
|
|
Alpha
|
|
|
|
|
Nitrox/Vario
|
|
|
|
|
Stinger
|
|
|
|
|
Vyper
|
|
|
|
|
2
|
|
|
|
|
Air
|
|
|
|
|
Vytec
|
|
|
|
|
DS
|
|
|
|
|
Zoop
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
2012-10-21 07:43:03 +00:00
|
|
|
Uemis::
|
|
|
|
|
Zurich
|
|
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
Uwatec::
|
2011-12-14 03:55:26 +00:00
|
|
|
Aladin
|
|
|
|
|
Memo Mouse
|
|
|
|
|
Smart
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
|
|
|
|
|
Zeagle::
|
2011-12-14 03:55:26 +00:00
|
|
|
N2iTiON 3
|
|
|
|
|
|
|
|
|
|
* OSTC computers are listed in the pull-down menu as OSTC. All 3 types are supported.
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
|
2012-01-02 00:52:45 +00:00
|
|
|
[[AppendixB]]
|
|
|
|
|
Appendix B: Suunto Export Unpacking Script
|
|
|
|
|
------------------------------------------
|
2011-12-23 18:43:58 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
#!/bin/bash
|
|
|
|
|
#
|
|
|
|
|
# Small basic example script to unpack Suunto Export files
|
|
|
|
|
# for the use with Subsurface
|
|
|
|
|
#
|
2011-12-23 18:43:58 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
echo -n "Enter the directory where you stored your Suunto Divemanager export file: "
|
|
|
|
|
read SuuntoExportDir
|
2011-12-23 18:43:58 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
echo -n "Enter the name of your Suunto Divemanager export file: "
|
|
|
|
|
read SuuntoExportFile
|
2011-12-23 18:43:58 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
echo "You have entered: $SuuntoExportDir/$SuuntoExportFile"
|
2011-12-23 18:43:58 +00:00
|
|
|
|
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-01 23:12:28 +00:00
|
|
|
cd $SuuntoExportDir
|
2011-12-23 18:43:58 +00:00
|
|
|
|
|
|
|
|
if [ -e ./$SuuntoExportFile ]; then
|
|
|
|
|
mkdir SuuntoXML
|
|
|
|
|
cd SuuntoXML
|
|
|
|
|
unzip ../$SuuntoExportFile
|
|
|
|
|
subsurface *.xml
|
|
|
|
|
else
|
|
|
|
|
echo "Nothing found! Try again!"
|
|
|
|
|
fi
|
