subsurface/tests/testplan.h

// SPDX-License-Identifier: GPL-2.0
#ifndef TESTPLAN_H
#define TESTPLAN_H

#include <QTest>

class TestPlan : public QObject {
	Q_OBJECT
private slots:
	void testMetric();
	void testImperial();
	void testVpmbMetric45m30minTx();
	void testVpmbMetric60m10minTx();
	void testVpmbMetric60m30minAir();
	void testVpmbMetric60m30minEan50();
	void testVpmbMetric60m30minTx();
	void testVpmbMetric100m60min();
	void testVpmbMetricMultiLevelAir();
	void testVpmbMetric100m10min();
	void testVpmbMetricRepeat();
	void testMultipleGases();
	void testCcrBailoutGasSelection();
};

#endif // TESTPLAN_H
Add SPDX header to tests Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2017-04-27 18:21:27 +00:00			`// SPDX-License-Identifier: GPL-2.0`
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-07-04 16:12:54 +00:00			`#ifndef TESTPLAN_H`
			`#define TESTPLAN_H`

			`#include <QTest>`

			`class TestPlan : public QObject {`
			`Q_OBJECT`
			`private slots:`
			`void testMetric();`
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de> 2017-03-15 21:28:36 +00:00			`void testImperial();`
			`void testVpmbMetric45m30minTx();`
			`void testVpmbMetric60m10minTx();`
VPM-B: Add more planner tests Add more VPM-B planner tests. The "expected" total run time is taken as the total run time produced by the Fortran VPM-B program. For all these tests, the results are within two minutes, which is a good result, but most are classified as a "fail". Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-08-25 14:33:17 +00:00			`void testVpmbMetric60m30minAir();`
			`void testVpmbMetric60m30minEan50();`
			`void testVpmbMetric60m30minTx();`
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-08-24 21:37:20 +00:00			`void testVpmbMetric100m60min();`
Tests for minimum gas Add automatic tests in TestPlan for minimum gas: - Copy minimum gas result (pressure) to diveplan. - Add cylinder size and working pressure for bottom gas to every dive in TestPlan Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan - Add minimum gas check for every dive - Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank Hint: Deco check for these new dives is commented out at the moment Signed-off-by: Stefan Fuchs <sfuchs@gmx.de> 2017-03-15 21:28:36 +00:00			`void testVpmbMetricMultiLevelAir();`
Test another VPM-B dive plan This adds a test for 100 m for 60 min dive on trimix using VPM-B Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-08-24 21:37:20 +00:00			`void testVpmbMetric100m10min();`
TestPlan: Add test for repeating dive If variables were accidentally carried through from a previous calculated plan, subsequent plan could be affected. This test aims to detect if this happens. Commit 8994270 corrected such a bug. If it were reverted, this test would fail (as it should). Signed-off-by: Rick Walsh <rickmwalsh@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-09-22 14:32:26 +00:00			`void testVpmbMetricRepeat();`
A test for gases used in the planner This tests for the planner getting the gases in the manually entered part of the dive wrong (as here: from incorrect value returned by get_gasmix_at_time. Signed-off-by: Robert C. Helling <helling@atdotde.de> 2018-10-30 10:55:11 +00:00			`void testMultipleGases();`
Fix invalid bailout gas choice when planning a CCR dive. Fixes a bug reported in https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E: When planning a CCR dive with OC bailout, the diluent gas may be chosen as the first OC bailout gas, despite being set up with a use type of 'diluent', and likely not being available for open circuit breathing. `best_first_ascend_cylinder` is now initialised to an invalid value (instead of the first cylinder, which may or may not be a diluent cylinder), and its subsequent use is guarded by a validity check. Signed-off-by: Michael Keller <github@ike.ch> 2023-02-16 02:53:17 +00:00			`void testCcrBailoutGasSelection();`
Add simple test for the dive planner This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set up a dive plan given certain standard gases. Instead of trying to verify the complete plans it checks that we switch to the deco gases at the right depth and the complete duration of the dive matches our expectation. The test intentionally fails right now for imperial as we have the wrong switch depth for Oxygen. See how useful tests are? On the downside, the test does NOT produce the same plan as Subsurface when I try to create a consistent setup for both - and I have not been able to figure out why. There must be some other parameters that I'm not setting, but I haven't identified them, yet. It's very small differences, for example in the metric case the stops at 21m, 9m, and 6m are each one minute shorter in the test than it what Subsurface calculates. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> 2015-07-04 16:12:54 +00:00			`};`

			`#endif // TESTPLAN_H`