user manual - planning dives

The attached patch is the ugly start for dive planning. Hopefully
someone will enhance it from and add whatever essential is missing.

miika

From 2d51a56489fde7086032fb5efeeea6e9032ec1ba Mon Sep 17 00:00:00 2001
From: Miika Turkia <miika.turkia@gmail.com>
Date: Mon, 18 Feb 2013 19:04:14 +0530
Subject: [PATCH] Instructions for basic dive planning

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is contained in:
Miika Turkia 2013-02-18 19:09:18 +05:30 committed by Dirk Hohndel
parent 65aba97c55
commit fbde4b1783

View file

@ -566,6 +566,70 @@ JDivelog (see <<S_ImportingDivesJDivelog>>):
subsurface MyDives.xml --import MacDiveDives.xml
[[S_DivePlanning]]
Planning dives
--------------
Subsurface supports planning of dives using open and closed circuit
equipment. Deco calculations with optionally displaying the ceiling is
done using a new implementation of Bühlmann ZH16 algorithm with
gradient factors. Since the planner and our implementation of
decompression algorithms are new and have received only a limited amount
of testing - WE STRONGLY RECOMMEND NOT TO PLAN DIVES SIMPLY BASED ON THE
RESULTS GIVEN HERE.
Basic information that is to be inserted when planning a dive is the
planned start time of the dive, air consumption and planned depths and
segment times. There is also other information available for those who
are familiar with dive planning or use closed circuit rebrethers.
[width="70%",cols="<5%,20%,<75%",grid="none",frame="none",style="monospaced"]
|===============================================================================
|| Dive starts | +60:00 means that the dive is 60 minutes in the future
|| Surface Pressure | Air pressure on surface, default 1013 should suffice for most
|| SAC during dive | Air consumption during the dive, use conservative value based on your own air consumption e.g. 20l/min
|| SAC during decostop | Air consumption during decompression stop, e.g. 17 l/min
|| GFlow | Gradient factor low value affects the ceiling calculation, leave to default if you are not familiar with GF
|| GFhigh | Gradient factor high value affects the ceiling calculation, leave to default if you are not familiar GF
|| **Ending Depth** | Depth where current segment ends, can be used for ascending, descending and level
|| **Segment Time** | +3 min is relative time from segment start, 7 is an absolute time from the start of the dive
|| **Gas Used** | Mix used; AIR, EAN32, 15/50 (compressed air, 32% nitrox, and trimix)
|| **CC SetPoint** | ***FIX*** This has something to do with rebrethers so better leave empty if you are like me
|===============================================================================
Information marked with bold is used multiple times to do the actual
planning of the dive. So let's plan a dive to 20 meters lasting 20
minutes at that depth and another 10 minutes in 10 meters. We'll only
concentrate on the dive profile here filling the segments.
[width="30%",cols="<15%,10%,<15%,<60%",grid="none",frame="none",style="monospaced"]
|===============================================================================
|| 20 | +3 | AIR
|| 20 | +20 |
|| 10 | +1:30 |
|| 10 | +10 |
|===============================================================================
So we define the ending depth for the first segment to be 20 meters
(assuming metric preferences, you can also define the depth explicitly
to m or ft). We will take it easy and descent takes 3 minutes from
surface to the planned depth. Then we spend 20 minutes in same level
using same air as before (used gas is left empty).
Ascent to 10 meters will take one and half minutes that is slower than
the fastest recommendation. However, as you can see in Subsurface's
calculations it is still marked with yellow, meaning somewhat
conservative speed (green would be conservative and red on the fast
side). After the defined 10 minutes at even depth of 10 meters we let
Subsurface calculate how we will surface. If decompression is required
these stops are taken into account and can be easily visualised by
setting the first depth to e.g. 30 meters.
Pre-populated segments can be left empty and new segments can be added
by clicking the 'Add waypoint'. Note that if you go to edit previous
segments, the later segments values are not properly included in the
calculation until they get a focus out event or 'OK' is clicked.
[[S_Menu]]
The menu and sub-menus
----------------------
@ -624,6 +688,12 @@ When you enable ascent for your dives, within the dive profile, a yellow
marker with exclamation sign (!) will show on the points where you have
ascended.
The Planner menu
~~~~~~~~~~~~~~~~
This men opens up a dive planning dialog. The dive planning is described
in <<S_DivePlanning>>.
The Help menu
~~~~~~~~~~~~~