... and reset deco information in profile ceiling computation.
The planner test then needs to know about the struct holding the deco
state.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Calculating dive.when + dive.duration doesn't always give the correct
endtime of a dive especially when a dive has surface interval(s) in
the middle.
Using the helper function dive_endtime() fixes this issue.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When we merge dives, the sample_start and sample_end pressures are only
used in-memory for displaying data to the user. However, we should
update them as well as this will show the user the correct data in the
equipment/cylinder and i.e. SAC calculation.
Fixes#577
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Use signal / slots on the networkreply instead of freezing the event
loop.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses some review comment on whitespace and translated
string formatting.
In the string formatting, a tiny additional change is made.
I wanted the email address in the explanation text in a bold
font. Using the HTML <b> for this, removed the /n newline
characters in the output. Apparantly, mixing these two
formatting styles does not work. No problem, replaced the
/n to HTML style too.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit tries to implement most of issue #515. It reworks the
one credential page, which its dynamic PIN part, into two pages.
Main driver of selecting one of the two pages is the showPin
boolean. Page 1 contains the email/passwd field (and the
option to use a no cloud setup). Page 2 only contains the PIN
part (and the option to cancel the process).
The Kirigami central button does not seem very handy here. We
need, for example, a cancel, sign-in and register, only register,
etc. buttons, which are not easy to handle in specific icons.
Therefore, normal pushbuttons are chosen to deal with user
interaction, and the Kirigami button is removed from these
pages.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Previously, we could edit the cloud credentials in basically two
places. At startup of the app from a fresh install (and no previous
data on the device), and from the settings. Issue #515 proposes
only one way.
However, we need a way to access the new credential UI pages, so
that the pages at a fresh install of the app can be reused,
for example for account switching.
This commit replaces the settings cloud credentials block by
a simple (not editable) display of the current credentials, and
a button to access the initial pages, for all management tasks
on the credentials.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit is just a precaution. It makes sure that the old
(aka previous) credential status is correctly set on all changes
of this status.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a very subtile bug. Testing/developing on the desktop for mobile,
with a normal logbook in a git repo, resulted in a surprising effect.
When swichting from a cloud account to a NOCLOUD situation, the no cloud
repo was (not always) reset to the NOCLOUD_LOCALSTORAGE, but to the
normal logbook. Resuling in commits in the wrong repo.
This can easily be solved by setting the filename to NOCLOUD_LOCALSTORAGE,
when switching to NOCLOUD mode.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In case the credential state is NOCLOUD, the saving of credentials
in the preferences was suppressed in case of invalid data in the
email/passwd fields.
There is no reason to check these fields for correct input, as they
are not used in case of NOCLOUD mode. A simple if statement is added.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As written in 8d9ad3cfea7e4c0875, the user needs to be able
to exit the PIN entry UI, in case no PIN can be received due
to a wrong email address.
The simplest way seems to just clear the cloud credential data,
and let the user try again. Obviously, we could argue if the
exact previous state of the 1st credentials screen could
be restored, but as it is only 2 simple fields, of which
it is higly likely that the email adress is misspelled (and
the password hidden), it seems overly complex to implement.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Makes sure that the CS_NEED_TO_VERIFY status is carried forward
and sets the showPin flag that triggers the 2 different states
in de QML UI.
The new credential UI will have one page for username/passwd,
used for setting up an account or switchting to a different
account, and a second page to enter a PIN only.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In case the credential status is UNKNOWN, and the cloud username
and password are empty, do not go automatically to NO_CLOUD status.
This is (again) preparation for future work on credential management.
For example, the user entered an email address with a spelling
error, so does not receive a PIN code email. This user needs a
way out, so there needs to be a <cancel> button on the PIN code
screen. And the most logic was of cancelling is emptying the
entered username/passwd and let the user try again.
Without this change, the user immediately gets into the (somewhat)
final NO_CLOUD state, which will result in (very) confused users.
With this change, there is exacly one way (left) to get into a
NO_CLOUD setup: hitting the proper button, so a deliberate user
action.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It appears that the onCompleted of the StartPage item is triggered
before the onCompleted of the rootItem. This is logical as the
Startpage is a child of the rootItem. And, yes, this does matter.
As the divelist also contains the logic for initial cloud
registration (and is the default page shown in a state where
the cloud credentials are valid (CS_VERIFIED state)), we need to
know the correct credential state at start of the app.
The move of this one line of code makes sure of that, in addition
to setting the credential state from the preferences. Now, the
setupActions function can reference correct credential data.
This is further preparation for a better cloud creation
process from mobile.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The VPM-B model assumes off-gassing only happens during ascent
which for us are that part of the dive where dp->entered is
false. This is wrong for dives with manually entered waypoints
in the ascent, as discussed in
See #601.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
9m/min (or 10m/min) is the ascent rate assumed by Buhlmann and navy tables,
and the default of most other planning software and dive computers.
Setting the default to 9m/min allows the default behaviour to be consistent
with "expected" behaviour, but does not prevent the user from changing the
preference. There is disagreement between some users whether the final ascent
ascent duration should be considered when determining the length of the final
stop. This change does not alter that at all, but at 9m/min, the difference
is <1min.
See #592
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
.github/ISSUE_TEMPLATE.md will be used when the Github users
create new issues.
.github/PULL_REQUEST_TEMPLATE.md will be used when the Github users
create new pull requests.
The markdown supports HTML comments (<!-- comment -->), which
can instruct the Github user how to create a detailed PR or issue
report.
Most big Github projects use such templates and these can help
the collaborators to examine the PRs and ISSUES faster.
Fixes#598
Reviewed-by: Dirk Hohndel <dirk@hohndel.org>
Reviewed-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Most writes to a connected DC are small, typically some
command bytes to get DC in download mode, or to set
some parameter. All this just worked over BLE,
however, sending a full firmware update (on an
OSTC device) failed, as the underlying BLE interface
can only handle small 20 byte BLE packets at once.
So, send max ble->packet_size chuncks at once.
Tested for the following cases (linux desktop with
OSTC3 over BLE):
1) normal download of dive data.
2) read and write settings from configure UI
3) update firmware (from 2.15 to 2.15)
And to my surprise, no flow control credit administration
is required here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Stupidly, commit 731d9dc9bd ("DC download: tell user when no new dives
were found") was missing the conditional when to show that messages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a manually created single commit to incorporate the changes in
https://github.com/Subsurface-divelog/subsurface/pull/502Closes#502
[Dirk Hohndel:]
I was able to manually merge that branch but it created a complete mess
out of the tree and brought several dozen commits in a second time, so
I gave up and instead created this single commit.
Signed-off-by: Philippe Massart <philippe@philmassart.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This option should have never been there. This is not how
gradient factors are supposed to work. It would only trick
users to use the wrong value..
Signed-off-by: Robert C. Helling <helling@atdotde.de>
MapWidgetHelper::calculateSmallCircleRadius() uses
the second argument (boolean) of QDeclarativeGeoMap::toCoordinate()
and QDeclarativeGeoMap::fromCoordinate(), which isn't supported
in Qt 5.5.x and errors will be thrown on runtime.
This argument usage is redundant for the calculateSmallCircleRadius()
use case.
If the argument is set to "false" it tells the map to avoid
clipping the viewport and always return a valid QPointF/QGeoCoordinate.
Given that calculateSmallCircleRadius() only works with the
map center - i.e it's called like so in MapWidget.qml:
onZoomLevelChanged: mapHelper.calculateSmallCircleRadius(map.center)
The only way for the radius estimation to fail is if the map widget
width is smaller than SMALL_CIRCLE_RADIUS_PX * 2 = 52px, which is not
possible as the MainWindow splitter prevents it.
If the map widget becomes that small it would be hardly usable,
yet no errors should be thrown related to this change.
Tested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
While this interface is deprecated, too much in our existing code depends
on being able to create the QLowEnergyController with just the address.
Additionally, createCentral() is new in Qt 5.7 and therefor this broke
builds on Linux distros that are still on 5.6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the progress bar on macOS doesn't show the
progress text. This creates a label below the progress bar
and shows the text there instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially on BT/BLE devices, where there is a longer negotiation
phase at the beginning of the download, this seems more user friendly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ordering on Mac appears to be random, but after looking through the
various successful logs of BLE downloads, it seems we always wrote to the
ClientCharacteristicConfiguration descriptor. So try to find that one first,
and only grab the first descriptor in the list if we didn't find a
ClientCharacteristicConfiguration descriptor.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
