Now that we have defined addition and subtraction on unit
classes, let's use them in a few examples.
Yes, some of these are a bit pointless, because they are
of the kind
a.mbar - b.mbar => (a-b).mbar
However, these probably should be further simplified
by storing the result in a unit type.
This commit is mostly a proof-of-concept.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also, turn it to use std::string instead of writing into a
global(!) buffer. This was not reentrant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Having this as a pointer is an artifact from the C/C++ split.
The divesitetable header is small enough so that we can
include it directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a humongous commit, because it touches all parts of the
code. It removes the last user of our horrible TABLE macros, which
simulate std::vector<> in a very clumsy way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a hairy one, because the sample code is rather tricky.
There was a pattern of looping through pairs of adjacent samples,
for interpolation purposes. Add an range adapter to generalize
such loops.
Removes the finish_sample() function: The code would call
prepare_sample() to start parsing of samples and then
finish_sample() to actuall add it. I.e. a kind of commit().
Since, with one exception, all users of prepare_sample()
called finish_sample() in all code paths, we might just add
the sample in the first place. The exception was sample_end()
in parse.cpp. This brings a small change: samples are now
added, even if they could only be parsed partially. I doubt
that this makes any difference, since it will only happen
for broken divelogs anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This makes memory management more simple, as not explicit deletion
is necessary.
A rather large commit, because changing QVector<> to std::vector<>
is propagated up the call chain.
Adds a new range_contains() helper function for collection
types such as std::vector<>. I didn't want to call it
contains(), since we already have a contains function
for strings and let's keep argument overloading simple.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a long commit, because it introduces a new abstraction:
a general std::vector<> of std::unique_ptrs<>.
Moreover, it replaces a number of pointers by C++ references,
when the callee does not suppoert null objects.
This simplifies memory management and makes ownership more
explicit. It is a proof-of-concept and a test-bed for
the other core data structrures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This the C++ version of membuffer. Since everything is C++, it can
just be made the default.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is now in C++, we don't have to use our crazy
TABLE_* macros.
This contains a logic change: the dives associated to a
dive site are now unsorted.
The old code was subtly buggy: dives were added in a sorted
manner, but when the dive was edited the list was not
resorted. Very unlikely that this leads to a serious
problem, still not good.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the taxonomy is now a real C++ struct with constructor
and destructor, dive_site has to be converted to C++ as well.
A bit hairy for now, but will ultimately be distinctly simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Include unused tanks in merges of multiple logs into a single dive if
the 'Show unused cylinders' preference is enabled.
Also rename the preference (in code) to `include_unused_tanks` to
reflect the fact that it is already used in more places than just the
display (exporting, cloning dives).
Simplified the cylinder model to make forced inclusion of unused tanks
dependent on use of the model in planner.
Leaving the persisted name of the preference as `display_unused_tanks`
to avoid resetting this for all users - is there a good way to migrate
preference names?
Signed-off-by: Michael Keller <github@ike.ch>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rendering resets the size, which now recalculates the axes.
Therefore, plotDive() must be called. The callers were doing
the opposite: call plotDive() first, then draw().
To make it easier for the callers, present a single interface
that handles these subtleties.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the interactive ProfileWidget2, just
use the ProfileScene to render the profile for printing,
export and mobile. One layer (QWidget) less.
This removes all the kludges for handling DPR on mobile.
Thus, the rendering will now be off and have to be fixed
by redoing the scaling code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since using separate profile-instances for print/export,
we never exit print mode. Therefore, the mode parameter
can be removed. This is a preparatory commit for passing
the printMode at construction time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not having to readjust the scale on-demand will make the
code distinctly simpler. Let's just pass it once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Very annoyingly, to render the profile for printing / export,
the profile still had to be show()n, thus requiring a parent
window.
Analysis of qmlprofile.c showed that this was due to the
transformation matrix not being properly set up on non-show()n
scenes.
Instead, we can simply render via the QGraphicsScene
(circumventing the QGraphicsView).
The code was factored out into the ProfileWidget2::draw()
function. This will hopefully make it easier to change
the size-code of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just as for printing, use an independent profile widget, so
that the UI widget doesn't have to be set/reset.
Also, make the size of the exported image independent from
the current window size.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When multiple profiles were exported, for every exported image
the profile-widget was switched to/from print mode.
Move this out of the loop, i.e. initialize and reset the profile
only once. This should slightly speed up export, but not by a lot,
since most of the time is spent by compressing the PNGs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The exportProfile function uses the UI and therefore was
supposed to be declared in backend-shared/* but defined
separately for desktop and mobile. Currently, only the
desktop version exists.
The goal however should be that there is no need of the
UI for this function. In a first step, move the function
to the common backend-shared/* code and conditionally
compile for desktop. In upcoming commits, the function
will be made independent of the UI.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Qt 6 will drop support for QRegExp.
When looking at replacing this use of a QRegExp it seemed like a much
better idea to simply switch to utilizing the taxonomy data instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TeX exports may hang the UI for a long time.
Show a progress-dialog that is updated after every exported dive
and allows the user to cancel the export.
This is pretty lame, because it is synchronous (export still runs
in UI thread) and therefore the UI still is sluggish. But it
is an improvement.
Since the TeX-exporting code is in a shared directory (desktop and
mobile), this uses a slim interface class. Mobile does not
yet use TeX export, but you never know. Better than #ifdefs
sprinkled all around, I reckon.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It turns out that the wrong base class was used for the chart.
QQuickWidget can only be used on desktop, not in a mobile UI.
Therefore, turn this into a QQuickItem and move the container
QQuickWidget into desktop-only code.
Currently, this code is insane: The chart is rendered onto a
QGraphicsScene (as it was before), which is then rendered into
a QImage, which is transformed into a QSGTexture, which is then
projected onto the device. This is performed on every mouse
move event, since these events in general change the position
of the info-box.
The plan is to slowly convert elements such as the info-box into
QQuickItems. Browsing the QtQuick documentation, this will
not be much fun.
Also note that the rendering currently tears, flickers and has
antialiasing artifacts, most likely owing to integer (QImage)
to floating point (QGraphicsScene, QQuickItem) conversion
problems. The data flow is
QGraphicsScene (float) -> QImage (int) -> QQuickItem (float).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Factor out code from ProfileWidget's ToolTipItem, but make
the radius of the corners dynamic. Move into backend-shared,
though a new ui-shared might be preferred.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If source files want to access preferences functions, they should
include pref.h themselves.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes#2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A tablet or phone is not a computer. What would you do with a CSV or TeX/LaTeX
file on a phone. Yeah, I get it, feature parity.
This should never have been merged.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
