The QDialog for html creates a folder, we need to choose a folder, not a
file. getSaveFileName was wrong. ;p
Fixes#533
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can't be the only dive computer, of course. Goes nicely with the
ability to reprder them.
Fixes#551
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed if something has changed that requires a redraw, but the
plotDives() function can't tell (for example when a dive computer has been
deleted and there's now a different DC in the same spot, with the same
number - see next commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reasons Marble appears to sometimes not detect double clicks and
call the correct callback. With this commit we manually intercept the
double clocks and route them to the right function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally gets me something that I like. The way the different boxes
get resized seems pleasant and intuitive. And it appears to do the right
thing on all platforms (I learned that having different levels of layout
nested creates no vertical offset on Linux/KDE, but a very ugly offset on
Mac, for example).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This raises the maximum number of gas mixes listed to 20 and also changes
the layout / design of the stats tab to make it much more attractive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner has its own view of the gradient factors. So replacing those
with the ones set up for viewing dives in the preferences is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might change the gradient factors. Make sure they are
back to what's in the preferences when we're done planning.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already did a list of gases and volume consumed for the selected dive
on the Dive Info tab, but did not provide that same data on the Stats tab
for all the selected dives.
I arbitrary limited this to eight gases (as the list can get quite long
when you select a lot of dives). The gases are sorted by volume consumed.
Fixes#535
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Being shown between the deepest and shallowest dive's max depth it
confuses a lot of people - the average depth is frequently less than the
shallowest of the dives, so at first glance it looks like the "average" is
less than the "minimum". So having three numbers grouped like this that
use different algorithms is just distracting.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
warning: 'ProfileWidget2::someVariableName' will be
initialized after [-Wreorder]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"warning: suggest parentheses around assignment used
as truth value [-Wparentheses]"
I think 4.8.2 is confused about this one, but we suppress
it regardless by separating into two assignments.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked before without the "file:///" prefix, but something else that
I did broke that. Oh well, now it works again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously the code could get confused by edits (including trivial things
like deleting the coordinates). It seems much more reliable to simply
compare the coordinates of the edited dive with the ones in the current
dive before the edits.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also change the on file XML to be even easier to read by making it a
duration as well (which gets us '32:34 min' instead of un-typed seconds).
This is backwards compatible, it will happily read what was written with
the previous commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And fix the bug that in the info overlay SAC was always given in metric
values. And try to reduce the number of places in which we calculate the
unit conversions...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 125ddd955c ("Display liters with script el") Robert only fixed
the C routine we use to show units. Strangely, we had a separately
implemented C++ function as well. Instead of implementing this in two
spots I now simply have the C++ function use the C function to do the
actual work and then wrap this into an easier to use (from UI code)
QString output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And make sure it gets called whenever it needs to get called - it was
missing from the openRecentFile case.
Fixes#530
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subtle change in function name from Qt4 to Qt5
setAcceptsHoverEvents -> setAcceptHoverEvents
Now Subsurface builds with Qt5 again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to store a 64bit time stamp with every picture. Even the
32bit offset (in seconds) from the dive start is WAY overkill. But
switching to that makes the code much more simple in a number of spots.
And makes what is saved to the XML file easier to read, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the pictures are too close to each other, spread them out a bit more.
This seems to give a reasonably pleasant layout.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch rotates the picture a bit, so it looks like it was
splattered around the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a drop shadow on the picture. a real blurry shadow
could be much better, but without OpenGL it's too costly to calculate
the shadow for each picture.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the picture looks a bit more like a real paper picture
shadow's missing, though.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a subtle animation when the picture gets hovered
with the mouse, and restored to it's original size when mouse exits
the image area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ScaleTo animation will scale or shrinks an graphical element in an
animated way. This is going primarelly to be used on the pictures on the
profile, but can be used on anything else later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the switch to a central event decoder and just return gasmix from
that we printed things in permille, eg. EAN1000 and 180/550 which looks
kinda strange.
This fixes that by using gasname instead to give the gas a name.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make the exporting path separators platform dependant
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is kind of a random cut off, but if plotting the dive takes more than
a second and TTS/NDL is on, we force it off. Because the algorithm for
that is fundamentally quadratic in nature it can take a VERY long time -
getting users to think something is broken.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In most cases this wouldn't really matter, but when planning very deep or
very long dive with corresponding very long deco times, calculating the
deco takes long enough to make this notable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was only semi-implemented the first time around. Now we really only
copy the ones that are indeed used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new QSettings group "HTML" to save the HTML exporting settings and
restore them later.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- use heading "Style options" instead of advanced
- choice of selected dives is the same as other tabs
- changing the default font to 14
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Separate the export dialog into two tabs general exports for other
exports and HTML export.
- Save HTML settings to JSON file
- Copy HTML templates to the exporting directory
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems odd to have different behavior depending on whether the window
manager tells us that the user wants to close the window or whether the
user hits quit or ctrl-q.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we edit any of these fields, we create new strings via strdup (or a
fresh tag_list). So if the edits are rejected, free all that memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do all of our edits on a copy of the dive - but the tag_list points to
the tag_list of the master dive (based on how we create that copy of the
master dive). So only free the tag_list if it is already different from
the master dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes to hold a pointer to the struct picture on the model, so we can
use it to determine the correct positioning of the image on the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It plots in the wrong place for now, because I need to change the model a
bit. But it shares the same pixmap with the other widget which is nice. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ignore the warnings for now, this patch connects and disconnects the (not
done yet) plotPictures() method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make referencing it from a few places more easy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The picture list is a single linked list where the pictures have a node to
their next element. When adding the same picture to two dives, things got
way way wrong and crashes were appearing.
This will replicate the information (filename, latitude and longitude) for
each dive that has the picture, BUT it still tries to save as much as
possible on the actual pixmap.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also seems intuitive. What's odd is that in the Planner you get a
confirmation dialog while here you don't. We should be consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The edit starts with the current value, but our data() function didn't
return that in the edit role.
Thanks Tomaz for explaining this to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QPixmap cannot be accessed from outside the Main thread, but QImage can.
so change that. Also, make the Photo widget display in Icon mode.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small changes in the model to display the pictures of the dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method should give the correct data to all views that the model is
connected to.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the picture model to use the new picture function calls, wich made
the code smaller and easyer to understand. AND as a plus, it doesn't use
the magic 123 identifier for pictures. AND it correctly adds images
without timestamp to the list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit breaks the loading of images that were done in the divelist
into smaller bits. A bit of code refactor was done in order to correct the
placement of a few methods.
ShiftTimesDialog::EpochFromExiv got moved to Exif::epoch dive_add_picture
is now used instead of add_event picture_load_exif_data got implemented
using the old listview code. dive_set_geodata_from_picture got
implemented using the old listview code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code took an odd approach. It tried to change all selected
dives whenever the user edited a field, and kept all this backup data in
case the user rejected the edits.
This code takes the opposite approach. Only edit a copy of the selected
dive and then when the user accepts it, edit all the dives and when the
user rejects the edit simply redraw the screen (as all the "real" data is
still unchanged).
This not only saves quite a bit of code, it should be much easier to get
correct.
Admitedly this code will need quite a bit more testing to make sure it
works as intended, but as far as I can tell it already gets more scenarios
right than the previous implementation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are new check-boxes to modify the look of the diveplan in the notes.
The old behaviour appears with "verbatim display", others are shorter,
runtimes, stoplengths and transitions being optional. Also round to full
meters and minutes to remove optical clutter.
To be done: Remember these setting in the config.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to call this as slot it needs to have defaults for all arguments.
So we need to change the gasmix into a pointer - which is actually better
as this allows to easily pass a NULL pointer when we want to continue to
use the previous gas.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add new methods to the MinMaxAvgWidget class to allow us to override the
default tooltips of its min and max icons, and then uses these methods to
make the tooltips for the Stats tab Depth instance more descriptive.
See #521
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds threaded processing of a batch of images. It uses the
QtConcurrent implementations to call a function repeteadly using
MAX_THREADS (Qt gets that for us) and returns a list of it.
This call is blocking, so while the pixmaps are being scaled in threads,
it will wait for all scalling to be done.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call that method from the mainWindow when the dive changes.
The updateDivePictures walks around the events of the first dc (since all
pictures are distributed allong all dive computers) to get the events of
type '123' (I wonder if there's not a better way to save pictures on the
dive, like an linked list of char* named pictures.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently this does nothing, but since "dive photos" can also mean
photos that were taken during the trip to the dive, some of them
will not be visible on the profile. this currently shows nothing,
because I didn't work out the Model bits yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has a few classes: the model is the list of pictures for the current
dive, the delegate is how this pictures will be displayed on screen, the
widget is the collection of delegates, and the DivePictureThumbnailThread
is a worker-thread to generate the thumbnails so the UI will not freeze.
[Dirk Hohndel: added the new files to subsurface.pro]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead wait until all pictures have been set and plot that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialogs where hard-coded and some variations of themes
could broke the placement of the text on it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix the infinite recursion on OSX and also clean a lot of
code, which is also very nice. <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is step one of many to use gasmix instead of int o2/he.
Right now some of these changes look ridiculous because after changing a
few lines we immediately go back to o2 = get_o2(gas). The reason is that I
wanted to convert a hand full of functions at a time. So in this commit I
only change validate_gas(), get_gas_from_events() and get_gasidx() to use
a struct gasmix instead of int o2, int he.
This state builds and survived some mild testing. Let's continue on top of
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 7d42b53bba.
With the addition of the dive plan details widget we no longer want to
show the deco points in the dive planner points table.
Conflicts:
qt-ui/diveplanner.cpp
We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to / from plan mode, we switch to show either the dive plan
detail widget, or the dive list widget.
So far this widget does nothing. This just makes sure it's there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Staring at the stack trace it seems that it gets into an infinite
recursion when trying to recalculate after being alerted to a change on
the ruler. I cannot recreate this here (not on Linux, not on Mac), but
here's a random attempt to prevent the issue: simply refuse to recalculate
the ruler while in Add or Plan mode.
Crude, but might show us if this really is the issue. Otherwise it's easy
enough to revert this change. The qDebug() in there should tell us if
people on a Mac do indeed see this even without moving the ruler around in
Add or Plan mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the change to the Cylinder widget would trigger a recreation of
the dive in an inconsistent state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was introduced in commit fc13361079 ("Don't crash if we try to save
a empty plan") - but it doesn't seem to make any sense. It is perfectly
reasonable for the diveplan to have no datapoints at this spot - we are
just about to call createTemporaryPlan() which will fill those datapoints
from the mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner would offer an text-editor if the user double
clicked it's remove column. forbidding that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Besides not deleting them, we shouldn't offer the icon for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch forbids deletion of the Deco Stop from the
QTableView that holds the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to create them, even if we don't display ( only because it
was a pain to correctly track them from the model ) - so, hide them
if it's not entered by mouse, but a deco one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching from PLAN or ADD mode to PROFILE, we
kept the dive handlers visible, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we avoid trying to create a dive from the plan while the plan
references the cylinder that has just been changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the infobox invisible in planner (it really doesn't provide a lot of
useful info while planning a dive and more likely gets in the way).
Make the calculated ceiling always visible in planner and add mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Exporting the raw dive list into JSON format for later viewing with html
and js files. Also some worldmap code organizations.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of even trying to keep one around (which then could cause all
kinds of trouble) we now always delete it at the end of the planner.
So simply always recreate one when starting the planner (and make sure
that the staging dive has always been cleared out, first).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we first ADD a dive and then PLAN a dive, stagingDive first was an
alias to the current_dive (for ADD) - we need to make sure that when PLAN
is started, a new dive is allocated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the stagingDive is just an alias for the current_dive (as it is in dive
ADD mode), there's no need to copy the cylinders; they are already there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly sets the state of the planner to "NOTHING"
after trying to edit a manually added dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes some inconsistencies that were happening on the add
dive / cancel actions. a bit of legacy code from the old system was still
in, which made things quite... EXPLOSIVE.
This fixes restoring the selection only if we have a selection and not
deleting the temporary dive twice.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the connections between DivePlannerPointsModel and
MainWindow from inside the Planner class to the MainWindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Duh. We had to reload the list (and make sure the internal data structures
are recreated as well) before restoring the selection.
I also switched to simply accessing the widget directly, instead of via
the dive_list() call.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is still something seriously wrong here.
For now let's just not restore the selection and at least this prevents us
from crashing. But I still don't understand why it crashes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Looping over the individual dives will be very slow if there are many of
them, as the profile will try to render each of them in succession.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only partially works. If I start from an empty dive list, plan a
dive, then abort, there are still leftovers in the profile widget.
Hitting Ctrl-W clears that out. But it just runs the same cleanUpEmpty()
again...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On an empty dive list we would remember the new dive (which gets
auto-selected since it's the only dive) and then crash when we try to
restore that selection after cancel (in which case that new dive is gone).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to reset the editMode right away, otherwise all the changes to the
input field (when resetting the data after the user cancels) will cause
Subsurface to crash as current_dive will temporarily be NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way manually implemented a parser, where it could simply call a
regexp (or, in my case, a QChar) that will split the QString into many, to
find the beginning and end of the strings on the tags.
This patch also fixes a Qt5 off-by-one bug on the tag Visualization.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure canceling the plan when saving an added dive made sense at some
point for some reason. Right now it makes things crash, so let's not do
it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when canceling the plan.
And doesn't display the correct dive profile until you switch to a
different dive and back.
And Keyboard focus is wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code had no chance of every working - on so many levels.
First unselect all dives, then extract data from a selected dive?
Set up the cylinder data (which didn't work), and then clear the data
again?
What the heck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch paints the dive red if the user is breaking ceiling
on the planner - it's quite fast, it analizes the depth over the
max(tissue_1 .. tissue_16) and changes the color of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the movements from the lines when added / removed
SO much better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a flag to only recalculate the axis when needed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the cleanup dirk forgot to set the plan tipe to PLAN instead of ADD
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function should likely to move to C in the future, I'm only
adding this here because I'm changing this file so much ( already
4 rewrites of the function )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The disableDcShortcuts is called inside of the ProfileGraphics
( I actually think that this method should be moved to there )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas consumption calculation fixed. Pressure difference still needs cylinder size to be set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 got confused about this slot. This does the same as previously but
gets Qt5 happy.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing o2 from a gas, eg setting it to "", air, this code would
raise a nice fpe. Fix that by using gas_mod instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a testament to how much I mess around with things that I hadn't
noticed that saving the column width doesn't actually work. Or actually,
saving them worked, loading them back failed as it was done too early and
the setColumnWidth() calls had no effect - and so the next time we quit
subsurface, the default width of 100 was written over all the saved
values.
This seems like an incredible hack but it has the advantage of actually
working. I look forward to someone with better insides into the inner
workings of Qt to properly fix this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the column width in the dive list widget when we create that
widget, based on what is in the settings. And we save the current column
width back to the settings when we destroy that widget (so if Subsurface
is shut down correctly and Qt actually gets to run the destructor but not
when someone kills the program).
That means that if we recreate the dive list at any point while Subsurface
is running (and we do that a lot when you manipulate your dive list in any
way shape or form), any changes to the column widths are lost.
DiveListView::reload() explicitly calls setupUi() which reads the column
widths back from the settings - but changes made to the columns aren't
saved to the settings until we destroy the widget...
I see no reason why reload() should call setupUi(), so I'm removing that
call. Let's hope this doesn't break anything else.
Fixes#518
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only a tiny bit of poke around the contextMenuEvent - the events
of the planner are dealt by the QGraphicsItem, and this makes the
logic pretty easy to follow. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's code in commit a3d300ca91 ("Correctly implement multi dive
selection") had a major flaw - it kept redrawing the selected dives
one after another. Not what we need. So this fixes this up so that it
doesn't take more than a sec to select all the dives that are on the same
part of the click on the globe. I've achieved this by creating a boolean '
dontEmitDiveChanged and sending the signal only if this flag is false.
The reason that we can't simply remove the emit from the selectionChanged
is because the selectionChanged is what we have when we click on the
diveList, if we removed this from there, nothing will happen upon
selection.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code had several issues. It broke the synchronization between
dive->select and Qt selected status and worse, it would partially unselect
previously selected dives when called.
This patch, however, causes the selection via the map to be glacially slow
because it forces a redraw of every single selected profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Give the export dialog a better name than just dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes a couple of issues with the existing code:
- removes a memory leak
- treats null and "" the same
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
According to the documentation clearSelection() should emit
selectionChanged() - but I can verify in the debugger that sometimes this
doesn't appear to happen - consequently our notion of what's selected gets
confused.
To work around this, after calling clearSelection() we simply manuall
deselect all dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple dives are selected, we need to be smarter about when to show
"add to trip immediately above" or "... below". This code is quite
readable, I think, and does the trick.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards getting the "add to trip" logic in the divelist context
menu to be consistent and correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu is getting way too big and confusing. This is now much
more cleanly done from the File->Export dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new profile code handles the resizing of the profile area in order to
accomodate the depth and time of the dive much more intuitively - the old
manual buttons to do so are no longer needed.
This also removes a few other unused methods.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes mouse dragging work as it should, a tiny
bit different than the old version, but I think it's a better
way. What's missing: Keyboard actions.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is not ported to the new profile, but from what I
can understand from it, it doesn't need to be. The purpose
of this code was to setup the correct colors and strings
for the current mouse position, we already do this on the
Profile in a different way, on the Notification Area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QGraphicsView system moves every selected item when the user
clicks and drags one. This patch makes a cache of all selected
items and removes the selection on them. When the user stops dragging
the Notification, the selection is restored.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes the planner actually work. There ar still
a few edges, but oh, joy - the new Profile gave a very unexpected
and nice addition to it - Grab the last handler of the initial
dive, and move it to the right, or get any handler, and move it
to the bottom to see what I mean.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a itemChange method, that emits a 'changed'
signal when the handler is moved. I'll use that signal on
the profile to call the correct method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI design looked too tight in my screen.
The explanation texts were a bit inconsistent (and in one case simply
wrong).
The explanation for the initial selection wasn't shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When choosing a format from the export dialog a two line description of
the format appears. This is helpful and prevents confusion.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All code that was removed already is working on the New Profile,
The code that's behind #if 0 means that it still needs to be ported and
because of some removal, it was not possible to keep it compiling (mostly
the removal of the Ruler class, that is the Axis, on the new profile).
The rest of the code that's untouched - most probably will keep that way.
The DivePlannerPointsModel is correct and well done, no need to change
that, only the Graphics part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A signal can connect to another signal, so I removed a slot that had the
sole purpose to call another signal and replaced that with a direct call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds the disconnections of temporaries. A temporary connection
is a connection that should be active only on a certain state, and we need
to clean that for the new state that will enter after.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those two functions are important and necessary for the Planner, they
create and remove the little balls that act as handlers so the profile
can be edited with the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a temporary measure to help me port the planner to
the new profile. it will be removed when I finish the port,
but it makes the software still usable, so there's no worris.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code checked if dest and source existed before trying to call an
method on them, but dest and source are created on the constructor,
and thus, the if is dummy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with any other graphics object, the settings for the ruler
should be managed by the ruler, clearing up the Profile logic
and making the code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used both preferencesChanged and settingsChanged in different
methods and classes to mean the same thing, this adds consistency.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of preferences that should trigger a full repaint are at the top
of this method, *if* this introduces a bug it is because some of the
preferences are not being correctly triaged yet and that needs to be
fixed. Regardless of that, now the profile will only enable / disable
the *ruler* instead of replotting everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QSettings is a bit bloated on its use, so we are trying to narrow
down the amount of calls to it. We have a preferences struct, use that
instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By moving the Hide/Show of the ruler to an internal method, we gain a bit
of codecleanuperism by removing a lot of unnecessary calls to their dest
and source drag-handlers.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the ability to close the exporting window, also Quit Subsurface with
this window in front, for consistency.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the ability to export selected dives only in the worldmap
exporter. After Miika added the export dialog in commit 7dc642860d
("Implementing export dialog") and exporting only selected dives became a
choice while exporting.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code replotted the whole dive, while what we really wanted was to
show the events. so just ->show() them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'Hide Similar Events' function asked the Profile to replot eveything,
only because some events were hidden from the interface. Instead of that
we can simply hide the events since the graph will be the same.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That macro was useless, I should have been drunk when I wrote it, and I
don't drink.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this overlapped with my commit 09e7c61fee ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit fb82da58a2 ("Globe: assume that we are looking at the
current_dive") changed the prototype for
GlobeGPS::prepareForGetDiveCoordinates. This patches the dummy in
NO_MARBLE.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 2bc76beb65 ("Globe: we always center on the current dive") changed
GlobeGPS::centerOn to GlobeGPS::centerOnCurrentDive. This patches the
dummy in NO_MARBLE, too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most users this is no change at all. For the few who download from
multiple dive computers this now shows them which of them is the primary
dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the new helper function from commit fc4f133f19d0 ("Add new
helper function that looks up the index of a dive by its uniq ID") to make
the logic implemented in commit 122593a63a46 ("Fix selection after
downloading dives from the dive computer") much saner to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we successfully download dives, the old selection should be cleared and
the one of the newly downloaded dives should be selected. I decided to
pick the last dive downloaded, which for most dive computers (but for
example not for the Uemis SDA) will be the first or earliest of the dives.
That seems much more intuitive than keeping the previous selection around.
Of course this is harder than it should be because of the way we track
selections and because we need a consistent dive list model in order to
change the selection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was completely bogus - it's confused about what the variable
'i' is counting.
This also let's us select the Uemis mount point by default if that's the
only valid "device" that we found.
Compile tested on Windows, untested on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user selects a Uemis divecomputer, don't show serial devices.
If the user selects a serial divecomputer, don't show the Uemis
filesystem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last key that went in ended a tag and the next key is a tab -
deliver that to the TabWidget instead so we can navigate between input
fields.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may sound counterintuitive but it actually makes sense.
If you have a default filename that's the name of you "normal working
file". If you want "Save as" something, that by definition is NOT your
normal working file but a subset or an experiment or something. And you
most definitely do NOT want to overwrite your default file with that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveList classes were a partial mess (and some of it is still in a
messy state). The classes that deal with it where done in 'qtHelpers.h',
the extern global variable in dive.h, a few methods here and there. This
concentrates most - but not all - functions in their own file. The reason
for that is to make the new developer faster when looking for things: if
it's a divecomputer related method, it should be in a single file, not
scattered around.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last time I touched this I got a scream from dirk, but then I
looked at the code again and the problem that I faced was that
I broke translations in a sad way, well, now I broke it again.
However, this method shouldn't belong to MainTab ( because of
that thingy that I said before and also many others: Separate
the logic of your application from the UI specific code )
This generates a string that's going to be used on the Interface,
it doesn't display it on the interface. Move it down below makes
it easier to test ( I don't need to create an Widget and worry
about the parent-relationship with the mainwindow just to test
this function, for instance. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStrings shouldn't be == "" to check for empty string, use .isEmpty()
QStrings shouldn't be != "" to check for non empty, use .size()
std::string shouldn't be cleared with = "", use .clear()
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4243fcb915 ("Dont set coordinates when two or more dives are selected")
Changed how the prototypes in GlobeGPS looks. This aligns NO_MARBLE
version of GlobeGPS with that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon pressing Ctrl-Q or the window close button a modal dialog was shown
to remind the user that the planned dive is not saved. This patch
triggers the "cancel plan" action before trying to quit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same problem as the previous commit: toStdString() returns a temporary,
and c_str() will return a pointer to internal data, freed at the end of
the statement. So get the pointer to be strcpy'ed in the same statement.
Changed to toUtf8() to be more explicit about the encoding and to avoid
std::string
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList::first() returns a reference to an item, but that list was a
temporary. The list gets destroyed at the end of the statement (the
semi-colon), so we ended up keeping a reference to freed data (i.e., a
dangling pointer)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the code loading a dive into the field would mark it as
changed.
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still gets it wrong (i.e. marks things as edited when they are not or
not edited when they are) but at least they are no longer incorrectly
marked as incorrectly parsed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot figure out how to get the hemisphere letters translated correctly
in qthelper.cpp. Short term hack for now - someone who understands how
this is supposed to work really needs to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As in commit 3870bdafee53 ("Globe: we always center on the current dive")
passing in a specific dive here makes no sense - it's always about the
current dive.
Fixes#513
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify the API (we'll take advantage of this in the next commit).
We always center the globe on the current dive, so no point in passing
that dive in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we keep updating the location text of all selected dives we can lose
the status of which dives had the same text of the original dive and which
did not (this happens if the location we are adding is identical to a
selected location but adds text to the end of it).
Now we only edit the other dives after we accepted the change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't understand why we wouldn't set the percentage if we displayed text
there as well. This looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on Linus' idea on the mailing list.
Treat NULL strings and empty strings as identical.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This time for values that aren't simply text.
For normal integers this is rather straight forward. For the 'when'
timestamp we simply assume that this is a shift in time.
What is still missing is consistent handling of the three fields that are
implemented as tags: tags, buddy and divemaster. We have special code for
tags that makes no sense in a multi-edit scenario. And we treat divemaster
and buddy as a single string - which kinda works but treats "Bill, Joe"
and "Joe, Bill" as different.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was broken when porting to Qt - we used to do this correctly in the
Gtk version.
When editing multiple dives we show the current dive to the user and allow
them to edit that and then apply those edits to all selected dives. The
way this is SUPPOSED to work is that we only change those selected dives
that had the same value for the edited field as the current_dive had for
that field.
Let's say you select ten dives. The current dive shows divemaster Joe. You
change that to divemaster Jim. Then only the selected dives that had
divemaster Joe should change to Jim. All other dives should stay
unchanged.
This seems to implement that logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
