Thus, the MainWindow doesn't have to extract the plan from
displayed_dive. This is a tiny step in an attempt to detangle
the interfaces. The bigger goal will be to make displayed_dive
local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating variations, they were sent to the mainwindow,
which updated displayed_dive accordingly. Do this directly
in the planner-model.
The idea is to detangle interdependencies and to make the
code reusable (planner on mobile?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
diveplannermodel already contains set_<asc/desc> function that convert from
screen value to real value; this adds get functions that convert real value to
screen value, so now all conversions are done in one place.
Use prefix Display to identify this is values prepared for the UI (both desktop
and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner has a computeVariations() function that can be run
in a worker thread. The code was not thread safe: a deco_state
object allocated on the stack of the caller was passed down to
the worker thread. It's well possible that the object would go
out of scope before the thread run.
Therefore, when running in the background, copy the object first
and free it in the worker thread.
Side note: Qt makes proper memory management again as difficult
as possible: You can't pass a std::unique_ptr<> to QtConcurrent::run,
because move-only objects are not supported. Not very friendly!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keyword "virtual" signalizes that the function is virtual,
i.e. the function of the derived class is called, even if the
call is on the parent class.
It is not necessary to repeat the "virtual" keyword in derived
classes. To highlight derived virtual functions, the keyword
"override" should be used instead. It results in a hard compile-
error, if no function is overridden, thus avoiding subtle bugs.
Replace "virtual" by "override" where appropriate. Moreover,
replace Q_DECL_OVERRIDE by override, since we require reasonably
recent compilers anyway. Likewise, replace /* reimp */ by
"override" for consistency and compiler support.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a divemode column to the planner model and a
corresponding field to struct divepoint and fill it
in the corresponding functions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Instead of writing TODO comment blocks, just do the work, and move the
function to the proper class. Further, after review from Berthold, cleanup
the function. There is no reason that getGasList() is member of
any class. It is just a non-class helper, and as it is only used
here, a static helper.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The more complex handling is no longer needed because:
- Keyboard tracking for gfhigh/low UI fields was switched off here:
030c094854
- GFhigh was limited to 40 here:
53fffe0ce3
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For UI responsiveness, we need to be able to run the planner in the background. This needs the
planner state to be localized (and we need to pass a pointer around).
In order to not let too many lines overrun (and to save typing in the future)
I have renamed instances of struct deco_state to ds. Yes this should have gone
to a separate commit but I accidentally commit --amend'ed it.
Computing of planner variations is temporarily disabled.
Unlock the planner when returning early
So we don't deadlock in add dive and recreational mode (which
use the planner without actually planning).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Wire up the UI elements (QSpinBoxes) for ascend rates (4x) and descend rate
(1x) correctly so that the profile and calculation is updated immediately
after the value is changed (e.g. increased/decresed by 1) by clicking
the QSpinBox arrows.
Until now one had to click into the profile or change another planner
preference first before the change became effective.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Print out partial derivatives of stop times with respect to
variation of depth and duratin of last manual segment.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
It's not too clever to give 0 a special meaning (as here:
use same gas as for previous leg) when 0 is a legitimate
value.
This should solve Willem's gas disappearance problem when
reediting a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Commit b1ed04a means that DivePlannerPointsModel::rememberTanks() and related
functions and variables are no longer required
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option to calculate the best mix portion of O2 and He for the dive's max
depth if the user enters * in the MOD and MND cylinder fields. Gas portions
are automatically recalculated if the max depth of the dive changes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conservatism level can now be changed from gui, is saved in settings.
Also way of disabling the planner settings in the ui was improved
to support more deco models and be called at the widget creation.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Removed recreational mode from ui and pref and replaced it with
new deco_mode enum.
Added radio button ui selection.
Set default deco_mode to Buehlmann algorithm.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Add the option to only switch at required stop to the planner UI. This is not actually used yet.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the option for a minimum gas switch duration to the planner UI. This is not actually used yet.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This got broken in a recent transition to more abstract models.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
