Make sure we take icons from Material Design Icon pack prior v3.0.
Originally they were published under GPL friendly CC BY 4.0 license,
but later switched to Apache 2.0 license.
Here's mapping of our icons to MD icon pack:
defaults.png -> action/ic_settings.png
georeference.png -> communication/ic_location.png
graph.png -> action/ic_timeline.png
Those icons were not modified, just renamed them.
Defaults and language icons were missing, and graph/profile
icon was not readable.
All icons except "language.png" were taken from Google's
Material Design Icon pack which is distributed under Apache 2.0 license
(see https://github.com/google/material-design-icons)
Language icon is from http://languageicon.org site. If their
license isn't permissive enough, then we can switch to a language icon
from Material Design pack (globe).
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Please apply this patch on top of the previous patch with the same title.
1) Provide icons with white margin to look more like photos
2) Optimise code, following Robert's suggestions.
3) Column heading for photos column is now: Photos. This takes up extra
horizontal space but makes the user interface more understandable.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Add an extra column to dive list, just left of Locality field.
2) For each dive, give summary of photos as follows:
i) no photos: no icon in that column
ii) photos taken during dive: show icon of fish
iii) photos taken before/after dive: show icon of sun
iv) photos taken during as well as before/after dive: show
icon with both fish and sun
3) Provide information for the sort operation to work on
this column of the dive list.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this is only supported in the Suunto EON Steel backend, but we
should try to add this to others where we have such a distinction (and
maybe assign different values to the predefined libdivecomputer events).
This also adds three new icons for info, warning, and violation. The
warning icon we had already, but I drew a new one from scratch to have it
match the violation icon.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was no reason at all to keep those icons on the root
folder.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It looks odd if one item is missing an icon. Thus suggesting (yet
another) placeholder icon for the preferences dialog.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While looking for the icons so luisa could create svg
versions of them, I found out a few things that are not
used anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may be too subtle... the current dive site now has a brighter flag
than the others. I may need to make it an even bigger difference or maybe
make the flag a little bigger or something... but it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move from the Dive List context menu to the Dive Info tab, it will only
appear when connected to Facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous icon was of a bird that didn't seem to make sense. This
icon looks like the tissue graph and should be more intuitive.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The icon comes from heinrichsweikamp.com, the same as the ostc3.png did.
I've emailed with Matthias Heinrichs at HW and they have given us
permission to use both the ostc3.png and ostc2n.png under the GPL v2.
They also can provide the hi-res originals if anyone needs to do more
work on these icons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a icon to the Vyper config page. The image is taken by me of
my Suunto Vyper. Thats the reason for the quality.
Question: Would it be ok to grab a PR image from Suunto's web page to
use here? If so they got better ones...
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
During Subsurface startup there are several warnings reported:
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
The reason is explained at https://wiki.archlinux.org/index.php/Libpng_errors
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: scaled PNG files and added the code to show them and
to make them somewhat bigger]
Signed-off-by: roberto forini <forini.r@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just untill luisa send us correct icons.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the white circle in the backround of the gaschange icon.
This makes it stand out a bit less but looks better to me.
This also fills in the black part on the cylinder neck.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since not all platforms support theme icons, we need to pack
them into resources and fallback to that resource theme.
There seems to be a bug in Qt
(https://bugreports.qt-project.org/browse/QTBUG-16697), thus
default theme name (hicolor) does not work. So we test for
'window-close' theme icon on startup and if not found, set theme
name to 'subsurface'
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new image resource named poster.png which,
is shown instead of the 3 posters. The main reason for that
is due to the poster text not being visible. This new image
is pretty much the Subsurface logo only.
It also removes the grid lines, while the poster is visible.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Move the buttons of the profile window around to have more sane positions.
- All the buttons affecting the ceiling(s) are now grouped together.
- All the buttons affecting the Information Box are now grouped together.
- The previous icon for "Show calculated ceiling" has been reassigned to
"Show all tissues"
- A new stand-in button hav been included for "Show calculated ceiling"
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show a nice poster that Luisa did for Subsurface ( we have a few other
options that I'm waiting her to send. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was first reported by Benjamin Fogel who also sent a patch but that
patch was changing all pngs instead of just those affected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a temporary workaround while we figure out why the Windows
build doesn't load SVGs correctly. To avoid messing with the build system
I simply switch to using PNG everywhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
these parts must be put together, they were saved in parts to make it easy
for hover effects, etc.
Signed-off-by: Luisa Domingues <luisapiresdesign@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
