No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
These just make no sense. Since the value is copied, it
has no meaning to the caller whether the function can
change the value (and vice versa for return types).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Provide file I/O for those star widgets that are enabled. The values of the
widgets can be stored to and read from either xml or git.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dive sites, the dive sites to be selected were collected
in the C-core. But that doesn't have access to the selected dive sites
if in dive site mode. Therefore, collect the dive sites in C++ and
pass down to the core. Use a std::vector to avoid memory management
woes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
is_dive_site_used() had a "selected" parameter. If true it would
return whether the given dive site had a selected dive. Turns
out all callers had this parameter set to true. Therefore, replace
by a simplified function without the "selected" parameter and
give the function an appropriate name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It turns out that the dive site saving was subtly but horribly buggy.
To save the value of the dive site, it did
show_utf8_blanked(b, t->value, " value='", "'/>\n", 1, anonymize);
which looks sane on the face of it, but the problem is that it puts the
final closing xml marker in the 'append this at the end' case.
That means that if the value is empty, the value won't be saved, but
neither will the closing tag. Resulting in an xml line that looks like
this:
<geo cat='3' origin='0' <geo cat='5' origin='0' value='Other name'/>
where the first geo tag was saved without the ending marker.
That then makes all the xml nesting entirely wrong, and the whole file
fails to save.
Now, the code around it does check that 't->value' is not NULL, but it
doesn't check for a value that is empty or all spaces (which also will
make 'show_utf8()' just skip it.
Fix it by saving the end marker separately:
show_utf8_blanked(b, t->value, " value='", "'", 1, anonymize);
put_format(b, "/>\n");
so that the xml is valid even if the goe marker value wasn'r.
Reported-by: Bob Barker <barkerb1965@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While testing the cylinder type saving fix, I noticed that the RBT
saving was broken. Instead of saving RBT whenever it changed, we'd save
it when it was non-zero. Which doesn't match the git save format, and
also doesn't match what we do when loading an xml file (where we default
to the previous RBT value, and a sample RBT will modify it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve Williams reported a crash when saving a previously loaded dive as
xml, and gave a gdb backtrace.
It turns out that if we can't parse the cylinder use type (OC, diluent,
oxygen, unused) we initialize the cylinder use to an invalid type, and
then when we save it, we mess up.
Fix it up by doing proper limit checking before accessing the
"cylinderuse_text[]" array when saving.
Reported-by: Steve <stevewilliams@internode.on.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Turn the table functions of the dive site handling into macros
as was already used for dives and dive trips. This has the effect
that the table is kept sorted by UUID.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the XML and git savers, unchanged webservice-dive sites were
deleted. Since the webservice is not functional anymore, remove
this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 4d06ddd723 removed deletion of
unused dive sites on save. The corresponding variables were not
removed leading to compiler warnings. Remove the variables too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unused dive sites were deleted on save. This clashed with the undo
system in the following scenario:
1) Delete single-use dive site.
2) Save (dive site deleted)
3) Undo (reference to freed dive site)
Therefore, as a quick-fix, keep the referenced dive site around.
Note that this also means that empty dive sites must not be
deleted, as it might refer to a dive in the undo system. Instead
only clear references to empty dive sites in the global dive
table. Factor this functionality out, as it was common to the
XML and git savers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, get_gasmix_from_event() and get_gasmix() return pointers
to either static or to (possibly changing) dive data. This seems like
a dangerous practice and the returned data should be used immediately.
Instead, return the gasmix by value. This is in preparation of
const-ifying input parameters of a number of core functions, which
will ultimately let the merge() function take const-arguments in
preparation of undo of dive-merging.
On common 64-bit systems gasmix (two "int"s) is the size of a pointer
and can be returned in a register.
On 32-bit systems a pointer to the struct to be filled out will be
passed.
Since get_gasmix() now returns a value, the first invocation is
tested by a NULL-initialized "struct event *". Document this in
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The index-field was misused by the IO routines to mark which dives
had been saved. Somewhat questionable, but let's at least name the
field accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a space character missing in the xml generated by the
present code. Insert a space character.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This provides for reading of divemode change events from dive logs
and for writing them to dive logs. This applies to xml and git
divelogs. Divemode change events have the following structure:
event->name = "modechange"
event->value = integer corresponding to enum dive_comp_type (dive.c),
reflecting the type of divemode change (OC, CCR, PSCR, etc).
In the dive log file, the event value is written as a string that
corresponds to each of the enum values, e.g.
<event name='modechange' divemode='OC' />
This xml is also read from the dive log file and translated to an
appropriate value of event->value.
The file diveeventitem.cpp was udated to reflect this new way of
dealing with divemode change events.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The following statement in the hashstring() function:
return hashOf[QString(filename)].toHex().data();
returns data of the temporary QByteArray generated by toHex().
Thus, the caller will access released memory, which could lead to
data corruption.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
