On change of the filter, the headers of non-extended trips were not
updated. Therefore, on filter-finish-event loop over all trips
in DiveTripModel and signal data-changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveItem and TripItem classes were wrappers around dive * and
dive_trip * used to extract tabular data. With the rework of
DiveTripModel they lost all their state besides the pointer itself.
The usage was:
DiveItem item(d);
item.data(...);
This can now be simplified to the much more idiomatic
diveData(d, ...);
and analoguously for TripItem.
While adapting the data() function to be part of DiveTripModel, change
the
QVariant ret
switch(...) {
...
case ...:
ret = ...;
break;
...
}
return ret;
style to
switch(...) {
...
case ...:
return ...;
}
Not only is this shorter and easier to reason about, it generally also
improves the generated code. The compiler can directly construct the
return value in the buffer provided by the caller. Though modern
compilers start to be very good at avoiding unnecessary copies.
In total this cleanup results in a net-reduction of 190 lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Ultimately, we want to use a single dive-list and not replicate
it in the Qt-model code. To this goal, let's start with using
the same sort function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The command-objects select a current item, but this selection
was not propagated to the front-end. The current item is the
base for keyboard-navigation through the dive-list and therefore
should be set correctly.
It took some experimentation to get the flags right:
QItemSelectionModel::Current
Hopefully, these are the correct flags across all supported
Qt versions!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't delesect dives, when unregistering them from the backend.
If a previously selected dive is added, select it in the dive-list.
For this purpose introduce a SELECTED_ROLE to query the DiveTripModel
for selected dives.
Unfortunately, when adding multiple selected dives, current_dive_changed
is called for each of them, making this very slow. This will have
to be fixed in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list is fed data by means of a sorted "DiveTripModel".
There are two modes: list and tree. This was implemented rather
elegantly with a general "TreeModel", which can represent trees
of arbitrary depths.
Nevertheless, we have at most two levels and on the second level
only dives can reside. Implementing proper model-semantics
(insert, delete, move) will be quite a challenge and implementing
it under the umbrella of a very general model will not make it
easier.
Therefore, for now, hardcode the model:
At the top-level there are items which may either be a trip
(can contain multiple dives) or a dive (contains exactly one dive).
Thus, we can completely de-virutalize the DiveItem and TripItem
classes, which are now trivial wrappers around dive * and dive_trip *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-system now guarantees that pointers to dives are stable
throughout their lifetime. Therefore, replace the unique index by
pointers. This is a small performance improvement, but much more
importantly, it will make it more natural to transport a pointer
to the dive inside QModelIndex's private pointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveTripModel (the model describing the dive-list) was destroyed
and recreated on every reset of the list. This seems excessive.
Instead - in analogy to most other models - make it a single
global object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keyword "virtual" signalizes that the function is virtual,
i.e. the function of the derived class is called, even if the
call is on the parent class.
It is not necessary to repeat the "virtual" keyword in derived
classes. To highlight derived virtual functions, the keyword
"override" should be used instead. It results in a hard compile-
error, if no function is overridden, thus avoiding subtle bugs.
Replace "virtual" by "override" where appropriate. Moreover,
replace Q_DECL_OVERRIDE by override, since we require reasonably
recent compilers anyway. Likewise, replace /* reimp */ by
"override" for consistency and compiler support.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Conceptually, the width of the columns should probably reside in
the view not the model. But much more severly, the old code didn't
work: Columns were set in a DiveTripModel, which was deleted
right away.
Therefore, move the logic back to the DiveListView. Introduce
a QVector<int> of the initial column widths, so that they can be
erased from the setting if unchanged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each DiveItem (which is a wrapper around diveId with some virtual
functions), had a member icon_names, which is an array of
four QStrings. These were not used anywhere and must be an obscure
oversight and was probably planned as a static cons array?.
In any case, remove it.
There *was* a function-local analogous icon_names array in
DiveItem::data() though. This array would initialize four
QStrings from C-string literals on every invocation. Make
this array static, local to the translation unit and use
the QStringLiteral macro to construct the QString object at
compile-time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add DiveItem::displayTags helper method to return Tags as a QString
New Tags column is
by default inserted before "Photos" column
by default disabled
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
The `static int defaultWidth[]` definition in divelistview.cpp
could potentially end up missing an element which can later result
in out-of-bounds access when iterating through the list of
columns and updating their widths.
Add a couple of methods in DiveTripModel for setting and getting
the widths and use those. The default values are now pre-set in a
QVector in the DiveTripModel() constructor.
Throw warnings if out-of-bounds columns are requested.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
1) Add an extra column to dive list, just left of Locality field.
2) For each dive, give summary of photos as follows:
i) no photos: no icon in that column
ii) photos taken during dive: show icon of fish
iii) photos taken before/after dive: show icon of sun
iv) photos taken during as well as before/after dive: show
icon with both fish and sun
3) Provide information for the sort operation to work on
this column of the dive list.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One specific string did not translate. First, Dirk and I (via IRC)
suspected a leading space was the issue (see commit eccac1321f).
However, I found out that the problem was still there. A non translated
string "%1 shown", when applying a filter on the divelist, and looking at
a trip line. It shows always untranslated "%1 shown". Extracting
to-be-translated strings from the code, I found 2 errors: Class
<classname> lacks Q_OBJECT macro.
This patch adds a missing tr() definition and implementation to 2 structs.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
