The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code for toggling the DC reported ceiling in red or "surface
color" clearly had never been tested.
This seems to create a reasonably attractive implementation - not exactly
what we had in the past, but good enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 uses different widths for some of the poly. lines
in the profile. Setting an explicit value fixes that.
Tested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially in O2 decompression parts of a dive, the pp02 is typically very
close to the threshold value (normally 1.60 bar). The old implementation
of the pp profile graphs assumes that there is exacty 1 consecutive set of
samples that needs to be in the "warning color". This results in an
erroneous display of the mentioned graphs, connecting multiple episodes of
too high pp with bogus lines in between.
This fix generalizes the pp graph logic to allow for multiple segments of
high pp, each to been drawn seperately in the "warning color".
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to give it a different color (red) and make it a smaller
size.
While implementing this I also fixed the size of the temperature text in
the new profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That particular dive didn't have a temperature, and thus we got a crash
while accessing the last temperature text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last temperature text used to have the same align flags
as all the other texts: Right. this makes it much more appealing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code shamelessy copied from the old profile introduced
a bug where the old temperature was not correctly shown.
I'v added a new member to the class that will store the
last valid temperature, and use that to calculate if there's
a reason or not to display it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we move, shrink or expand the depth axis, the
meandepth should also change it's position. this
patch adds that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does a few things:
1 - reset the model when user closes the dive file
2 - connects the 'rowsAboutToBeRemoved' in a way that the graphics can
remove their polygons too
3 - adds a 'clear' virtual method so items that don't follow the rules can
clean themseves up.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But in general we should not show the profile of a dive that
was recently removed from the list - e.g. via File->Close.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize/construct all variable members in constructor list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes use of a cache variable instead of creating / accessing a
new one via operator[], because for some reason QGraphicsPolygonItem
doesn't return a reference for polygon and a copy is always made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch optimizes a few items when hitting the
'save preferences' dialog, since when a preference is
modified, all the items try to reload their visual
based on wether a preference changed or not, the correct
code for 'hey, my pref changed, let's update' needed
to be done.
now the axis will only set a new maximum if it's different
from the old one ( and thus, going to a new dive with
the same maxdepth or maxtime as the old one will not touch
their axis, not triggering gratuitous animations. )
also, the 'incr by 3m' was not being called - it seems
that our 'syncsettings' method is not storing things on
the 'prefs' global var. I added just for the incr by 3m
case, but it's something that we need to check later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gradient factor is shown with this patch, but the correct position
should still be adjusted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch only adds preference-awareness for the ceiling.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the color of the cylinder pressure use the sac colors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the beginning of the partial gas pressures, there's
two more. but this code uses a good part of the Model View system,
and it's way clearer than the old one. Luckly the other 2
missing items will be even more clear ( the diffs ) to do,
because I just need to create a new PartialPressureGasItem and
set the properties. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch prevents memory leak by adding the text on the list of
'delete me when model changes' items. it also makes things a bit more
snappy because the scene doesn't have to deal with all of the
texts bounding rectangles eveytime.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the profile item should also use the model to know when to
change something, this makes it happen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the temperature item as a cache that will
be updated as the model updates, instead of deleting / recreating
it everytime the dive changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last patch correctly moved the GasPressure item to use
a cache-based system, but ignored the fact that the Gas
pressure text was not being removed from the scene. this fixed
it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the Gas Pressure Item a 'cached' item, when the dive
changes, the item will regenerate the drawing based on it's model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new class DiveCalculatedTissue that's preferences aware.
It knows when to show or hide itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we will always have this object on screen, and as soon as the
model changes, it's contents will change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reported ceiling now behaves better by not being deleted / recreated,
instead it uses the same object and connects to the model to know when to
regenerate its plot.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the cartesian axis of the profile depth shrink and
(together with it) the Profile Depth and the grid lines. There will
probabla bey a lot of things that didn't have their correct position
fixed, so I'll fix them in the later commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's implementation of the MeanDepth item was correct, but in order to
add the 2 strings to it ( one at the begin, one at the end ) I had to put
more stuff inside the ProfileWidget that's already packed with graphics
items.
So I created a new class MeanDepthItem that contains these 2 strings and
will get updated whenever the value changes.
I also fixed a math inconsistency where I changed RIGHT to LEFT.
(wich fixed a few text-placements, and broke others.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the preferences changed signal is fired, the items that can change
their visual based on the preferences now have to reimplement the
preferencesChanged method, so they know if they need to be replotted on
screen. I already implemented that for two of the items ( ProfileDepth and
Ceiling ) but others might need that too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
