This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.htmlFixes#473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some things are still missing: samples and events, and cylinder and
weightsystem information. But most of the basics are there (although
the lack of sample data makes a big visual impact)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Used gas mixes and gas changes are imported. Also po2, ndl, cns and
ceiling are added to profile samples. As far as I can tell, the Searwater
Desktop shows ceiling in 3 meter (or feet equivalent) steps, but stores in feet
(or probably meters). I just use the value reported, no conversion to 3 meter
steps.
Fixes#432
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sqlite database from Shearwater Desktop log software is imported. Just
the basic information like location, buddy, notes and dive profile
(depth and temperature).
This is tested with a DB in Imperial units, thus metric input might
contain errors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the opening of DB connection to occur before DC dependent code.
This way we can try to detect log software before calling the DC
dependent import function. This prepares for adding support for
Shearwater sqlite database.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
rint() is "round to nearest integer", and does a better job than +0.5
(followed by the implicit truncation inherent in integer casting). We
already used 'rint()' for values that could be negative (where +0.5 is
actively wrong), let's just make it consistent.
Of course, as is usual for the messy C math functions, it depends on the
current rounding mode. But the default round-to-nearest is what we want
and use, and the functions that explicitly always round to nearest
aren't standard enough to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer already supports this, but we didn't save it.
Tested-by: Oscar Isoz <jan.oscar.isoz@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Very few dive log files can be identified by the name of the root
element in the XML log. As same element names are used between different
software, we need to use attributes as well to identify correct XSLT to
convert the log to Subsurface format. I would not be surprised if at
some point we'll just have to present a dialog to the user and ask which
software is in use...but this is enough for now.
This also adds the shearwater.xslt to the list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT to import manually kept CSV logs is hooked up and included in
resources.
Fixes#427
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have a macro to replace float equality testing, we should use
it in places where floating point jitter might bite use otherwise.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we do not have temperature readings, we do not want to plot the
temperature samples either.
See #415
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We'll want to do sane parsing of strings, but the C library makes it
hard to handle user input sanely and the Qt toDouble() function
interface was designed by a retarded chipmunk.
So just extend our existing hacky "ascii_strtod()" to allow a more
generic interface.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
None of these are actual bugs. But none of the fixes are harmful, either.
And much as I hate adding the 'default' clauses, I'd rather not have the
build output cluttered by invalid warnings.
The exception is the fix in divelistview.cpp - while I don't think it is
possible for this function to be called with no dive selected,
initializing pd to NULL is cheap insurance in case that does happen for
some weird reason.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we no longer need to keep them on disk and worry about
installing / uninstalling them. They will always be kept in-memory
(compressed).
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old parsing code overwrote the first comma with a '\0' and then
checked the index against the length of the buffer - which was changed by
replacing the ',' with the '\0'.
This means that since commit 78acf20848 ("Don't crash on loading tags
longer than 127 chars") Subsurface has potentially damaged / lost data in
dive files!
Added a test dive that shows the issue if opened by a Subsurface version
after the commit mentioned above but before this commit.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't enforce a limit on tag length, but we would crash on a tag
longer than 127 chars.
This uses the xml buffer as scratch space. Don't really know if this is
fair, but it looks like it works.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On a 32bit machine this will truncate values with MSB set to 0x7fffffff
Fixes#164
(thanks to Linus for pointing me in the right direction)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to speed up XML loading for large XML files (and thus
subsurface startup times) by trimming the fat off our own matching code.
The actual libxml overhead (particularly string allocation) tends to be
the dominant part, so this only speeds up a big load by about 12% for me,
but hey, it can be noticeable. Dirk's example nasty 175MB xml file with
~5200 dives takes "only' 7.7 seconds to load, when it used to take 8.8s.
And that's on a fast machine.
For smaller xml files, the dynamic loading costs etc startup costs tend to
be big enough that the xml parsing costs aren't as noticeable.
Aside from switching the node names around to "little endian" (ie least
significant name first) format to avoid some unnecessary strlen() calls,
this makes the nodename generation use a non-locale 'tolower()', and only
decodes up to two levels of names (since that's the maximum we ever match
against anyway).
It also introduces a "-q" argument to make startup timing easier. Passing
in "-q" just makes subsurface quit imediately after doing all necessary
startup code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new implementation supports custom tags
which are provided by the user as well as
default tags which are provided by subsurface.
Default tags can be translated and will be written
to XML in their non-localized form.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This gets rid of compiler warnings "format not a string literal and no
format arguments [-Wformat-security]". E.g. when building distribution
packages these warnings are often treated as errors preventing the
build (with good reason).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This patch implements GUI for importing CSV log files. One is able to
configure what columns contain time, depth and temperature fields.
Pre-configured log applications currently included are ADP log viewer
and XP5. (Both of these use actually tab as separator, so the field
separator currently hard-coded.)
[Dirk Hohndel: minor fixes]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's ascii_strtod was blindly copied from other GPL code and didn't do
what was the main purpose (i.e. ignore the locale and still accept the
numbers we have in our data files).
This implementation does *not* care about INF/NaN, and it does *not* try
to handle some strange conditions (overflow/underflow), and I do *not*
guarantee that it doesn't have rounding issues.
That said, for our native format, we never print odd FP numbers anyway
(since we use fixed-point integer arithmetic), and while we *do* care
about exponents for some of the odder import formats (I remember
seeing them in jdivelog output), we don't care about the crazy cases.
So rather than worry about getting the edge cases right for the max
double exponents (around +-308), it just says "screw you" and gives
you something close enough.
So what it *does* try to do is handle the actual parsing right, and
get the right answer for all the reasonable cases.
Works-For-Me(tm).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements basic functionality to import CSV formatted log
profiles to Subsurface. The import includes time, depth and temperature
from AP Logviewer based on one sample log file I have received. It is
assumed that dive time is the first parameter and depth second.
Temperature is given as a parameter from C source (hard coded currently
to field 15) but we should have a GUI implemented for selecting the
wanted fields.
The two different sample logs of CSV dive log export I have received use
tabulator as field separator. I assume the possible GUI should have
option for the FS as well to be given as parameter to the XSLT.
[Dirk Hohndel: small fix to the error string malloc]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This event is on when accumulating deco time. Once you reach the floor
deco time will start decreasing and the event will stop. Going below the
floor again will re-activate the event.
Also identify event type 13 in DM4 imports as airtime.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
