Fix the generation of <switchmix> elements in the UDDF export.
Also change the ids of gasmixes to include the helium fraction, and
fractions of a percent, in order to make UDDF export suitable for
technical diving.
Signed-off-by: Michael Keller <github@ike.ch>
When doing the xslt transformation for UDDF export, the C source does
actually give a parameter units with value 0. Thus we need to treat
that case as normal mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
We need to match the divesites to suppress extra output that breaks the
XML. This is because the divesites are actually gathered by calling a
template.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF only supports a specific set of alarms. Some events also don't map
to alarms but map to other types of elements in UDDF.
This patch adds a map of the accepted types. Where a map doesn't exist
the type will not be mapped to an alarm, the option then remains to
map it to another kind of element, in the same way that happened with
headings and gas switches.
This removes the need for the specific exclusion of heading and
gas switch, as they are now simply not included in the map.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using node() along with the node-set seems to grab the weights properly
for me.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switchmix values must be concatenated properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug when the first sample doesn't contain pressure info.
This fixes that by selecting the first with pressure info.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XDS schema for UDDF is very sensitive to ordering of elements
so I've rearranged many of them to match. Elements in:
- informationbeforedive
- waypoint
Adjusted namespace of export to correct UDDF namespace.
Updated remaining references to mixes it include prefix 'mix'
Moved equipment from informationbeforedive to informationafterdive *
Change trip ids to generated IDs and updated tripmembership to use
the trip id instead of the name *
* These constitutes a difference in XSD and the documentation. I will
raise these issues with the author.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed underscore from buddy name elements
Added 'mix' prefix to gas ids. Ids must not start with a number.
Added mandatory profile data with empty tags.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XPath was incorrect for parsing divecomputers into the equipment
section, meaning they dont get inserted.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with buddies, sites could contain characters which are not valid
in Ids. Also, it is very possible to have duplicate site names.
This uses an XSL generated id to prevent any issues.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is instead of using their names, which may contain illegal
characters.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add name at <generator> level, and add additional <homepage> in
contact tag.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently repetition groups are used to group dives into trips. This
is not really correct. Repetition groups should really represent a
group of dives where tissue loading needs to be preserved between
dives (typically the same day).
UDDF has support for trips, using the <divetrip> tags. This is a
bidirectional link between the dives and the trips.
This patch adds support for these trips. However, it leaves in the
repetition groups. Repetition groups may need further consideration.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sum together all of the weights recored on a dive to use in the
<leadquantity> tag in UDDF export.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch would not fill the first name field if there was
no second name. This rectifies that.
Signed-Off-By: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XSLT didn't expect the temperature tag to be within the
<divecomputer> element in the source, so the selection wasn't finding
it.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Selection of <cylinder> elements wasn't working where dives are
part of a trip. Change the selection so that it will select all
cylinders whether or not the dive is part of a trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to there being no xsl template for the userID, it ended up getting
inserted at the start of the output. This adds an empty template to
map the <settings> element, preventing this erronious insertion.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive site structure in the UDDF export was using an old structure
where each site is simply listed as a <dive_site>.
The new structure requires a single <divesite> containing at least one
<divebase> - a base location where you are diving from, and at least one
<site>.
As subsurface only tracks sites, I've created a single divebase to be
referenced by all of the sites.
Note: although profiles in Subsurface can be grouped into trips, these
are groupings of profiles, not sites, and the mapping may not be
simple. e.g. on different trips the sames sites may be visited but a
different base used. Or, different bases may be used on a single trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Part of a series bringing UDDF export closer to the UDDF standard, as
per www.uddf.org.
Currently when exporting to UDDF buddy entities are created
one-per-unique-combination. This means that a group of buddies on a dive
are exported as a single buddy, with the names comma separated.
This patch identifies all unique buddies, whether used independently or
along with other buddies on a dive. They are then linked independently
on each profile.
It also uses the UDDF standard <link ref=""> instead of
<buddy_ref ref="">
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds image support to UDDF export. As far as I can tell from
the UDDF specification, the images can only be added to notes field, so
that is what we do here. (buddy and owner can also have image tags, but
that is irrelevant for Subsurface currently.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Writing the samples/waypoints to UDDF export in a totally new way.
Previously the preparations for approximating waypoints was done for
every sample, now only for the events.
A few days ago it took 36 seconds for my test set of 8 dives to export
to UDDF. This optimization round took it down from 0m4.745s to
0m0.253s.
Fixes#508
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF export used all samples in the export when detecting previous
sample. This resulted in a very slow processing as we had to go through
massive amount of data for each event that's time was to be
approximated. The detection of previous sample was also erroneous
resulting in incorrect depth samples for the events in some occasions.
This patch should address these issues. And along with patch that
included pressure data on import this will fix the bug #499.
Well, the performance after the patch is still not stellar, but still
quite a difference with such a small change. The sample set of 8 dives
(with one event each) takes now less than 5 seconds instead of the
original 36 seconds (measured by doing the conversion with xsltproc).
Fixes#499
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding support for multiple cylinders on UDDF export. This also adds a
cylinder reference to the tankdata to enable mix lookups.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch generates a waypoint for events occurring between profile
samples. It approximates the depth of the crafted waypoint linearly
between the recorded sample depths.
Fixes#385
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF export saved events only if they occurred at exactly same time as a
profile sample. This patch will include events between samples as well.
This assumes that profile samples are recorded in even intervals.
Fixes#385
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After change to include XSLT files in resources, the import quit
working (even though the files and templates were found properly). This
patch uses include statement instead as it seems to work in our case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basic information like buddy, location and visibility is included in
UDDF export. Also attempt to grab temperature information from both
temperature and divetemperature tags.
This partially fixes bug #224. However, at least divemaster and tags are
not exported (as the UDDF spec either does not have these or has hidden
the information of these fields somewhere between so many seemingly
unnecessary other fields).
See #224
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Examples on UDDF specification indicate that pressures are reported in
Pascal. Also prefer the sample data from first dive computer for start
and end tank pressures.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch generates a gases section on UDDF export. The section
consists of all the unique gas mixes sawn on the dive log.
The latter part includes events to the export. Gas change and heading
events are properly translated to respective UDDF naming. Other events
are copied over as is. Some of the events are the same (ascent, deco,
rbt, surface) in UDDF some are not available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch implements exporting dives from Subsurface to UDDF format.
Events and cylinder info are the most remarkable things still missing
from the export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
