Marble had a bug on the way it treats zoom level, there's
no way for it to find out if it's user-input or algorithm input
and when a user clicks on a dive, it spins and centers on it,
but if the user clicks on another dive when it's still spinning,
it will get the zoom in the actual state ( spinning, usually zoom
is far away from the first position ) and continue the spin to the
other position.
This patch works by saving the first location and triggering a
helper function with a timer that will only update the zoom level
if the timer is not active ( and thus, will not get the bugged
zoom state set by the animation. ).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
1) Make a call mark_divelist_changed(TRUE) when the user adds new
cylinder or weight entries.
2) Call mark_divelist_changed(FALSE) in
MainWindow::on_actionClose_triggered() so that each time after
a file is closed or a new one is created it does not ask immediately
the user for a save confirmation for the blank file/divelist.
3) Call mark_divelist_changed(TRUE) once a dive's geo location
has changed in GlobeGPS::changeDiveGeoPosition().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the map selection works like normal selections do. Except we
don't do "ranged" selections (shift-click) for fairly obvious reasons.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I guess we should support de-selecting dives this way too, but right now
the interfaces only do selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We'll want to enhance this: better logic for which dives are near the
selection, and it's probably best to have a "control-click" that adds
the dives to the selection rather than deselecting all the old ones.
But it's already useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not showing them at all was a little too blunt of an instrument. There
likely are dive spots with the same name at different resorts. And even
at the same resort you could have multiple morings for the same dive
site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things got broken. Again. We no longer kept track of the selected dives in
our structures which broke statistics.
This attempts to fix that, but appears to still have a bug when selecting
trips. Sometimes this results in 0 dives being selected according to our
data structures, while Qt happily shows all dives of the trip as seected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a helper function to determine the Subsurface data directory
(are we running from build directory? installed on Linux? installed on
Mac? - still need to add support for Windows). This same function is
then used by both the setup for Marble and for the help browser.
This assumes that the user-manual.html file has actually been built and
installed (which we don't do by default with the current Makefile).
Right now there are rendering issues with our manual in the help browser
widget - I'm sure this can be fixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Following Dirk's commit ae2c132, add support for custom google sat
data in a MacOSX app bundle
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First try if Google Sat is already installed as a provider (and just use
it if it is). Then use the executable path to make an educated guess where
these files might be found as part of Subsurface.
We now install the necessary directory tree under
$(DESTDIR)/usr/share/subsurface/marbledata
Still far from perfect - but this should work at least on Linux. MacOS
will need a different modifier for the path and Windows I haven't even
thought about, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set default zoom level only when at least one dive selected
and user have not changed it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user very quickly switches between dives the zoom level sometimes
gets reset to be much more "zoomed out" (basically if you change dives
before Marble had time to zoom all the way in to the previous dive it will
keep whatever was the last zoom level of the animation - I'd consider that
a Marble bug).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user doesn't need to move the two folders googlemaps and
googlesat around in the filesystem.
This only works if Subsurface is started from the build directory - it
doesn't work when Subsurface is installed (and it doesn't at all address
the need to install these files and bundle them as well).
I'd consider this a hack to show how the real solution should work.
There is one more part of this that is a hack: Marble no longer searches
its default data directory; the path we set replaces the Marble system
search path. Sadly, Marble doesn't support paths the way Unix thinks of
them with multiple directories, separated by ':'. So this means that
Marble no longer finds any of its default icons. For most of them that
seems fine as I don't think lacking the icons for "manned_landing",
"robotic_rover", "unmanned_hard_landing" or the various types of places of
worship that Marble supports is necessarily a big issues for Subsurface,
but at least the default_location icon seemed important. And since we now
need to carry our own, I replaced the boring circle with a tiny dive flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
North is always up anyway. At least that's the way we've done it so far.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code converted the lat/lon to int before multiplying with
1,000,000 (in order to create udeg). Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "no dive location" message box was displayed above the marble
widget, which made the layout splitter move horizontally.
Made the message box as an overlay on the map instead.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addresses two issues:
- the kMessageWidget did not word wrap, so if it was wider then the Globe
widget the Globe would expand (and divelist shrink) when the user
switched from a dive with location to a dive without location
- the code was also too aggressive removing and redrawing the message
widget when switching from dive to dive. with this change we only hide
the widget if the next dive has a location (and only show it if it isn't
shown already). We also hide the message if no dive is selected.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a major hack. Debian appears to be missing a necessary header file
for Marble to work correctly. We include this header file for now and hack
the Configure process to recognize that we are on Debian and force using
our local copy of the header file in that case.
This may be needed on Ubuntu as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Borrowed the code from KMessageWidget from Aurelian Gateau, Kdelibs,
to better show passive information and notifications. instead of a
popup blowing in the user's face, a nice, animated and well designed
widget will gracefully fade-in, show the notes, and fade out when
not needed anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the possibility to change the coordinates of a dive.
it's too intrusive in the moment, but it was a proof
of concept. so I'll commit as is and try to find a better
way to warn the user what's going on in the future, using
something less terrible than a popup exploding in his face.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The marble widget now shows the dive locations
and also will center on the dive that the user clicked
in the dive list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds preliminary support for marble widget, alongside with the
dive list. my idea is to let the view stay there at the left of the
dive list since we got a lot of unused space and a globe is something
nice to have - so you can look around where did you dived, the
dives near the one that's currectly selected, and so on.
I'm not using OpenStreetMaps right now, but a good thing about
marble is that it is skinnable - so for instance, a dive school
could present a dive lesson using subsurface with a globe from the
1600, to make it feel like 'history'.
This version will only compile to Qt4.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
