Warning introduced in e8c918622f:
desktop-widgets\templateedit.ui: Warning: The name 'horizontal
Layout_3' (QHBoxLayout) is already in use, defaulting to 'horizontalLayout_31'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Bottom pO2 gas option in planner should be always enabled because
also recreational dives can use nitrox and produce "high pO2" warnings.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Going to "Template -> Edit" now has a field to enter the
border width (in pixels as only that makes sense in CSS as a flexible
unit, TMK).
This field modifies the template_options.borderwidth Grantlee
property which is part of the bundled templates already
and allows the users to modify the borders of tables.
The C++ implementation was missing, while the HTML (template)
implementation was already in place. Overlooked during GSoC.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks the UI as modified and updates the maxdepth of the dive; it
ignores changes to the duration, doesn't modify the profile, so it's
nowhere near ready.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hide them for now. This doesn't change anything visible, it's just
putting in place the pieces for later use.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4 file types (that are very rarely used), did showup in the
import-import dive logs menu (e.g. the file filter), but were
missing from file-open logbook file type filter.
Just added them to the file-open part to be more consistent.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems that in the .ui file, keyboard shortcut strings need
the notr="true" attribute to make them appear also in translations.
I found this on http://www.qtcentre.org/threads/62774-Translation-of-Shortcuts
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The cylinder table was constructed very ealy from the contructor of the
planner, so early that the tr() functions are not registered. This fix
instantiates the cylinderModel from the maintab (as it is done
with, for example, the weightsModel) and lets the planner user
this instantiated (and proper translating) cylinderModel.
Fixes: #206
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Remove the default stylesheet ("Courier" 13pt) from the planner output QTextEdit.
Remove the content of the html property of the QTextEdit because we overwrite it when doing setHtml.
After printing copy the original dive notes string displayed_dive.notes back to the QTextEdit
Advantages:
Display is according to font settings.
ctrl - mousewheel for zoom always works.
Drawbacks:
Printing font is same as display font but can be adjusted by zooming before.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The limits set in diveplanner.ui is intended for the unit set there,
meters. If we move between units we need to update the limits to.
This fixes#201
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Fixes#170 on GitHub
Simple catch function for double click events in the divelist,
prevents users from trying to edit the divenumber ithe wrong way.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When replanning a dive, do not set the surface pressure when it is 0.
Same for salinity.
This closes#161 .
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds support for notifying Ostc 4 users about new firmwares when
they download dives from their computers, gives them the option to
trigger the upgrade flow.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This way the menu entry becomes the togglee it appears it was designed to be in
the first place.
This closes#129
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes all references to WebKit if cmake option USE_WEBKIT is enabled.
For the user manual it changes it to WebEngine (seems to work for me).
Similar for the Facebook connection (minus a reference to a cookie jar).
This I could not test at the moment, as I wrote this on a train.
Printing does not work, it is a null operation at the moment. Currently,
large parts of of the printing code are commented out as there is no direct
way to access page elements in WebEngine. It seems this needs to be done
via Javascript (with a callback invoked). There is new functionality in
WebEngine to render a view to a PDF file but this needs more work (and
probably some thoughts towards page breaks).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Use more general wording about bluetooth preparations, because nowadays
there are more computers than the Ostc Sport which use bluetooth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of OSTC devices have grown, and this updates our lists of for
which devices we should check for firmware updates.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the menu entry or Ctrl-R is designed to renumber all dives, but
using the context menu renumbers only the selected dives. With this
change it becomes more obvious to the user what's happening.
Fixes#942
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems the timestampt of QMouseEvents are not reliable on Linux. So we
better use currentDateTime to detect a double click.
Fixes#1103
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to initialize the UI elements accordingly.
Fixes#1094
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Please apply this patch on top of the previous patch with the same title.
1) Provide icons with white margin to look more like photos
2) Optimise code, following Robert's suggestions.
3) Column heading for photos column is now: Photos. This takes up extra
horizontal space but makes the user interface more understandable.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Add an extra column to dive list, just left of Locality field.
2) For each dive, give summary of photos as follows:
i) no photos: no icon in that column
ii) photos taken during dive: show icon of fish
iii) photos taken before/after dive: show icon of sun
iv) photos taken during as well as before/after dive: show
icon with both fish and sun
3) Provide information for the sort operation to work on
this column of the dive list.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can happen when the user asks to replan a dive that
was imported from CSV.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove one last leading space character that I missed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a few uneeded lines and add more loading code for
the preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By using the default value argument we can reduce
this code size to a half.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reorganises the Preferences->Graph tab.
All leading spaces have been removed for labels and text fields.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Reorganise existing items in Graph tab so that all gass pressure
items are together and all profile-related items are together.
2) Provide units (mostly bar) for all settings having units.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call the emitDataChanged slot when ascent and descent rate spinboxes lose
focus. Without this connection, rates are not updated immediately after
editing the value with keyboard numbers and hitting tab or enter.
It is necessary to keep the valueChanged(int) connections, because
editingFinished() is not triggered by changing the value with the arrows.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit ugly since it does a regexp match on
divesite.notes but what can I do...
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does the basic export as a TeX file including a template.
It still lacks proper location parsing.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to read the file given as parameter, not the first in list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for comma as field separator for ADP import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea when this got broken. Fix seems like a hack as that variable
should get set in the plugin CMakeLists.txt. But it seems to work, so
"whatever".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DC_TRANSPORT_BLUETOOTH is quite abused here, and I removed it in our
custom serial code. This works around the issue so subsurface still
compiles.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When 'tabbing' through data fields, the order should be the same as the order
displayed on the screen. Getting the order right in the .ui file fixes the
tabstop order without needing to define it explicitly.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There's one function named uiLanguage() that should return
the current uiLanguage() that subsurface is running, but
it actually sets a whole lot of preferences, I think
that the general idea of that function is okay, but it seems
broken for me.
still, I used it to load the correct language from the preferences
since it's what this function is currently doing right now.
Also, a lot of missing groups where added.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b76c1846bb ("Settings update: Simplify Update Manager")
the logic for when to show the UpdateManger question to the user got
broken. Unintuitively, a boolean setting actually has three possible
values. True, False, and Unset. This patch fixes things to work as
designed again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of settings things manually in the code. (btw,
if we use lambdas the code can be quite smaller)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move Preferences sync / initialization out of the planner
widget prerferences to the ObjectWrapper.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix facebook widget to use the SettingsObjectWrapper instead
of figthing our complementary Settings each call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only block of code that I removed here is because the
QSettings preferences that is being read is the exact one
that we populate on the prefs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, the dive computer settings weren't in the
settings prefs. This moves it, makes the boilerplate on Settings
ObjectWrapper and make things compile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, prefs.save_userid_local is being set outside of
a preferences set (it's set to true and false while
loading the files via xml or git) and because of that
I had to bypass a few method calls.
When something triggers a preferences change, the
application will be notified that the preferences
changed, thing that I couldn't do while reading the
xml or git because that should be local-only.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save the language settings using the SettingsObjectWrapper.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't use a QSettings to read properties, it's really
easy to mispell something. Just use the internal prefs structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the SettingsObjectWrapper to access "geocoding"
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First commit in the series that will unify the way to use,
save, and update settings in the core. This fixes the usage of
"General Settings", "Display", and "Animation" to use the
SettingsObjectWrapper.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If an attempt to contact the cloud storage fails, Subsurface switches into
offline mode. This allows us to go back online again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's have the preferences window as small as possible with the current
data in it. This should allow people with vertical resolution of 600 to
use the preferences window.
Fixes#1083
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fix is reasonably straightforward when the divedatapoint structure stores
the cylinder rather than gasmix.
Fixes#970
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch (Planner: add best mix EAD preference) used the term EAD
(equivalent air depth) in variable names and strings, when it should have been
END (equivalent narcotic depth).
They're not the same thing and shouldn't be confused.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add best mix EAD preference and UI, along with a tooltip describing what it
does
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This parses .txt log files produced by Dataplus and Oceanlog software.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse the date and time information on CSV import if the file
name matches the one used by APD log viewer (date and time are available
in the file name). Hard coding the year to 20?? is a bit unfortunate,
but as there is only 2 digits in the year, we have to invent something.
And it would be quite optimistic to assume this will bite us back any
time soon :D
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to work around the crazy QDateTime::fromTime_t() problem in Qt.
It is *very* lightly tested. In fact, the only test is that "test0.xml"
change that is part of this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the basic properties properly but is still missing the parsing
of meta-data, especially used units.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original negative lookahead failed in case the file name contains
more than 1 dot as it looks for dot that is not followed by the given
extensions. And such a match exists in the file name. The new version
should look properly if the file ends with any of the given extensions.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Seabear import fixed up the NDL and TTS in the samples from minutes
(in the import) to seconds (our internal format for all time). But it
did it with a loop that overran the end of the samples array by one:
for(int s_nr = 0 ; s_nr <= dive->dc.samples ; s_nr++) {
Fix it to use the proper "<" instead of "<=".
Reported-by: Stuart Vernon <stuartv@force2.net>
Tested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This updates the got progress indicator to the changed interface where we don't
pass in an explicit percentage.
It also finally fixes an old problem: If we don't allow the Qt main loop to
process the events, we'll never see a decent progress indicator...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A few more fixes for things that broke in commit 7be962bfc2 ("Move
subsurface-core to core and qt-mobile to mobile-widgets").
[Dirk Hohndel: slightly edited and overlap with Linus' patch removed]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As expected, commit 7be962bfc2 ("Move subsurface-core to core and qt-mobile
to mobile-widgets") caused some breakage.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit df4e26c875 ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caches the git ID for the dive on load, and avoids building the
dive directory and hashing it on save as long as nothing has invalidated
the git ID cache.
That should make it much faster to write back data to the git
repository, since the dive tree structure and the divecomputer blobs in
particular are the bulk of it (due to all the sample data). It's not
actually the git operations that are all that expensive, it's literally
generating the big blob with all the snprintf() calls for the data.
The git save used to be a fairly expensive with large data sets,
especially noticeable on mobile with much weaker CPU's. This should
speed things up by at least a factor of two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
otherwise the max interferes with the value. Furthermore this increases
the max values a bit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the planner, for recreational mode, there is a setting indicating
the pressure at which the diver should be back at the surface. This
pressure was hardcoded to bar.
Fixes#1027
[Dirk Hohndel: small modifications, more reasonable step for psi,
more reasonable maxima]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The unit for the depth parameters ain't meters, its 0.1 meters. This
caused the values stored to be out of range.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The function preprocessTemplate(), did not account well
for indexes in Grantlee variables, such as:
dive.weight# (where # is the index)
dive.cylinder#
To solve the issue the list (QList<QPair<QString, QString> >)
for variables to be replaced is populated will all possible
indexes:
0 - MAX_WEIGHTSYSTEM for weights
0 - MAX_CYLINDERS for cylinders
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current Grantlee template loading scheme does not
allow a preprocessing layer. With the recent DiveObjectHelper
changes the layer is required if we don't want to add a set
of dummy methods and Q_PROPERTIES which will only inflate
the DiveObjectHelper class.
Use the already present helper readTemplate() to load the
raw HTML template and pass it to a static function which
does some variable replacement to accomudate DiveObjectHelper.
This change is done for the sake of not breaking the Grantlee
HTML variables on the user side!
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to detect the time format when initially importing a CSV
file. Well, only the minutes:seconds notation is detected currently.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to detect the date format when initially reading a CSV file
for importing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud Storage is a non-gui based class, we currently use
two different approaches for cloud storage, one on the desktop
target and other on the mobile target, we should use only one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
start of the QSettinsg Object Wrapper usage on the code
this first patch removes two macros that generated around
200 lines in runtime for something like a quarter of it
Basically, whenever we changed anything we called the
PreferencesDialog::settingsChanged and connected everythign
to that signal, now each setting has it's own changed signal
and we can call it directly.
The best thing about this approach is that we don't trigger
repaints for things that are not directly profile related. (
actually we still do, but the plan is to remove them in due time)
this commit breaks correct atualization of the profile (because
everything was connected to PreferencesDialog::settingsChanged)
and now I need to hunt a bit for the correct connections
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the configure parameters for safety stops on the hwOS(OSTC3)
and OSTC computers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The index in the fixpopup function was incorrect which caused the user to
need TWO cursor down presses to move to the second element. I changed the
index value so the user now needs only one key press to traverse up/dowm.
Fixes#954
Signed-off-by: krishan Chopra <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the start time when viewing trip details.
See #964
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The date comes from the first dive in trip, thus no need to allow
editing (especially since the edited date seems to be discarded in any
case).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As pointed by jwhferguson, I changed "show average depth" to "show
mean depth".
I modified file preferences_graph.ui and changed the text. This bug was
reported on fedora 22. i use ubuntu.layout and justification is nicely
displayed.
The patch also removes a no longer necessary include.
See #922
Signed-off-by: krisalpha <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We forgot to delete the Grantlee object before creating a new one
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need a list of QFileInfo if we are not using it
much better to have a list of the files directly
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set the values directly, seems much more sane.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
instead of duplicate the code that only chaged the QList that it
would access, create a temporary list and use it for dealing
with the code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we alreday have a Q_PROPERTY on the DiveObjectHelper,
grantlee introspection can use that directly to access it's
data, so there's no need for us to redeclare everything.
More QObject Introspection, Less handmade boilerplate for
Grantlee, QML, and a few other things.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
it was taking 3 - 4 secs here to open the print dialog,
first I tought it was a bug in our side, but it looks like
it's a Qt bug, and by lazy initializing it we don't actually
solve this, since it will still take 3 - 4 secs for the printer
to start, but the dialog will appear much quicker.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
and rename it to DiveObjectHelper, since it should be an QObject
based class to make it easier on the QML, grantlee and widgets
side to display the dive's internal data.
each Q_PROPERTY defined in the DiveObjectHelper.h file
can be acessed directly via it's name.
So, if you are on a model that returns a dive, acess it's name
by dive.name
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It no longer makes sense to lie about the version. If you are running a product
build, then the canonical version is the same version as the plain version used
to be. And in either case it makes much more sense to simply log the full
version information.
We used to have the differently styled versions for different OSs, but I don't
think this is needed anymore. Let's hope this doesn't go down as one of these
"famous last words" moments...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixes a capitalization error that prevented finding libssh2 in some
circumstances. And adds a missing include when building with libzip on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows users to not have to worry about this userid anymore. Both the
mobile app and the desktop app can now derive the userid from the cloud
storage credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Drag & Drop functionality swallowd the click events so double
clicks never happend. So here, we detect this and call the handler
explicitly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When typing in a partial location name, the match now considers the whole
text, not just the start of the text. So typing in "Yell" will match both
"Yellow House" and "Mellow Yellow".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that we have the possibility to add images without meaningful
time stamps to a dive, we should let the user provide that time
offset manually. This patch allowed pictures to be dragged from
the image list to the profile.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And disable it if there is no satellite based location service (but see
the comment in the previous commit - this doesn't appear to work
reliably).
Nothing happens when you use the menu entry. This just allows us to hook
this up later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to allow the backend to match account in multi user mode, it
needs to know if the requests are coming from the same instance of
Subsurface. Since I had to change the backend to add the ability to
retrieve a location service userid I added this capability at the same
time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the following HTML variables:
"dive.cylinders" -> Dive::cylinders()
"dive.cylinderX" -> Dive::cylinder(X)
"dive.weights" -> Dive::weights()
"dive.weightX" -> Dive::weight(X)
The patch also creates some macros to ease the Dive variable
lookup visually.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having {{ dive.suit }} in the HTML will now return the
suit as QString (from struct dive->suit).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the spirit of "Do the simplest thing that could
possibly work": capture Ctrl+leftclick mouse events
in the Notes area. If the string under the clicked
position is a valid url, then launch it.
Many common URI schemes will work. Typing a url that
starts with https:// will work. So will mailto: and
file://
See #733
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clicking Save in the preferences dialog will now cause
the GUI to immediately reflect the latest settings (just
as it behaved in 4.5).
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In 4.5 the signal-to-slot connections between the QSlider
and the QSpinBox were bidirectional. That setup is still
desirable; it must have been broken accidentally during
preferences refactorings.
Signed-off-by: K. Heller <pestophagous@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Print" button in the planner dumps the QTextEdit to
a QPrinter via ::print(). This patch renders the Profile
to a Pixmap which is inserted as Base64 stream in an <img>
tag and fed on top of the QTextEdit HTML contents.
This route preserves the planner notes as text in PDF prints.
The quick alternative is to render the QTextDocument to
a QPixmap as well, but that will not preserve the text
and pagination becomes manual.
Possibly the QTextDocument can be rendered as a QPicture
but pagination is still an issue, while so far there is exactly
one user requesting this feature!
Related small change in ProfileWidget2:
Explicitly hide the tooltip when printMode is true.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops. I fixed the previous commit, tested the fix, and then forgot to
update the commit and instead pushed it out. That was dumb.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove HTMLDelegate and ProfilePrintDelagate as
these are obosolete. The print related rendering
at the moment happens via QWebView.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some old CMakes that we use had problems with it, change to use
the qt5_wrap_ui macro that's bundled with Qt.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But keep the Interface so it's still userfull to create a new
SocialNetwork when needed, but it will be part of the code,
and not a plugin.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise if the user selects more than one dive, then goes back to just a
single dive, the maximum and minimum duration of the previous selected
group of dives stays visible which is clearly incorrect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should prevent a compile issue on mac, worked without it on linux.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the plugin is usable, one can use it to send stuff to facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes facebook plugin aware of it's connection status
enabling uploads only when connected, and hooking some things up.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't forbit the plugins to upload more than just the
current dive, it's better to change the name of the call.
also add a stub to make sure it's calling the right method inside
the plugin.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It should still not work correctly - but the plugin should be almost
ready - I'll do some papercuts on the next few commits.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
![](https://secure.gravatar.com/avatar/e81491093d5916411bcadfadabe61852?d=identicon&s=56 "K. \\"pestophagous\\" Heller"){kind=small}