Up to now, dives were added to the global dive table with
add_single_dive(). Split out the funtionality to add a dive to
an arbitrary dive in the add_dive_to_table_function(). The
difference compared to record_dive_to_table is that dives
are added at a specific position or the sort-criterion given
by dive_less_than(). This will allow to use a dive tabe for trips
instead of a linked list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Cressi specific PID was not used
when serial_ftdi_open_device tried
to open the device.
Reported-by: Daniel Krupp
Signed-off-by: Daniel Krupp <daniel.krupp@gmail.com>
Now these buttons are finally shown with long press and seem to be
working more-or-less as intended.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Naturally the paste button should be disabled, if this is the case, but
it still makes sense to do this check.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Initial implementation/prototype of copy-paste support for
Subsurface-mobile. The UI part is really lacking; right now the copy
button is initially visible and paste is achieved by long press on a
dive and clicking the paste button when it appears. Delete is currently
not possible at all, as I just failed to layout the buttons properly
using QML. It just sounds so simple, to put all the copy-paste-delete
buttons next to each other...
The data to be copied is currently hard-coded. A dialog to choose
inteded fields would be nice, but it'll take quite a bit effort to get
used to QML enough to be able to hack something together.
Anyway, this seems to work, even though the UI is not always reflecting
the paste without switching dives (when testing on laptop).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
The DiveTripModel places dives after trips in chronologically
ascending mode if the dive and the trip start at the same instant.
But in the core the sort order was undefined. This could lead
to a discrepancy. Therefore, implement the same sort-criterion
in the core code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Traditionally, the DiveTripModel has its data sorted in opposite
direction to the core-data (chronologically descending vs. ascending).
This bring a number of subtle problems. For example, when filling
the model, trips are filled according to the *last* dive, whereas
later insertion points are according to the ->when value from the
core, which depends on the *first* dive.
As a start of fixing these subtleties, change the sort direction
to reflect the core-data. Ideally, this should lead to a removal
of the redundant data-representation.
Since the model is now sorted in ascending order, sorting has to
be enabled in the DiveListView constructor to reflect the
default-descending order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update table of maximum oxygen exposure durations, used in CNS calulations.
This table shows the official NOAA maximum O2 exposure limits
(in seconds) for different PO2 values. It also gives
slope values for linear interpolation for intermediate PO2 values
between the tabulated PO2 values in the 1st column.
Top & bottom rows are inserted that are not in the NOAA table:
(1) For PO2 > 1.6 the same slope value as between
1.5 & 1.6 is used. This exptrapolation for PO2 > 1.6 likely
gives an underestimate above 1.6 but is better than the
value for PO2=1.6 (45 min). (2) The NOAA table only
tabulates values for PO2 >= 0.6. Since O2-uptake occurs down to
PO2=0.5, the same slope is used as for 0.7 > PO2 > 0.6.
This gives a conservative estimate for 0.6 > PO2 > 0.5. To
preserve the integer structure of the table, all slopes are
given as slope*10: divide by 10 to get the valid slope.
The columns below are:
po2 (mbar), Maximum Single Exposure (seconds), single_slope,
Maximum 24 hour Exposure (seconds), 24h_slope */
Then update Calculations of the CNS for a single dive -
this only takes the first divecomputer into account.
The previous version of the code did a table lookup and
used the max O2 exposure for the next-higher PO2 category.
This gave a shorter max O2 exposure time and a higher CNS
contribution for a specific dive segment, resulting in a
slightly conservative value of CNS, often some 2 - 3 % too high.
This code does an interpolation for PO2 values inbetween
PO2 entries in the lookup table and therefore results in a more
accurate maximum O2 exposure time for that PO2.
The maximum O2 exposure duration for each segment
is also calculated based on the mean depth of the two
samples (start & end) that define each segment. The CNS
contribution of each segment is found by dividing the
time duration of the segment by its maximum exposure duration.
The contributions of all segments of the dive are summed to
get the total CNS% value. This is a partial implementation
of the proposals in Erik Baker's document "Oxygen Toxicity Calculations" */
Overall, this PR does not radically alter the existing CNS calculation,
it only makes it more accurate and more consistent by doing
interpolation and by using mean segment depth to find PO2.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Adapt get_trip_date_string() to use the same logic as get_dive_date_string():
Use the static "loc" object to translate date. Before, the trip
date was shown in C locale.
Reported-by: Philippe Massart <philippe@philmassart.net>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While not something that many will use, editing a dive on
Subsurface-mobile should not result in data loss.
This makes the divemaster field behave in the same way as the buddy
field with regards to multiple entries.
Fixes#1853
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And use that to have our Travis build still work with the existing MXE
build container as well as the even older, pre-compiled MXE binaries
used in the windows build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's the minimum platform that we have used for a while now,
corresponding to Android 4.1 and newer (i.e., quite ancient).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With a recent change to the qt-android-cmake project we are now using
the toolchain file bundled with the NDK, and that forces all cmake
modules to be part of the NDK tree - which breaks the way we find our Qt
installation. This is a hack to work around this as it undoes this
setting, which I'm sure is well intentioned to prevent host system
issues in this cross build scenario.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a stray semi-colon on the beginning of a line in
DiveObjectHelper.cpp. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usage of the flags expanded, selected and fixup was removed some
time ago. Remove the flags too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code always sorted by "ascending" by default. But
because users typically want their new dives top, "ascending"
was defined for NR and DATE, such that it is actually descending.
Turn these around and intitialize these two fields as
default-descending.
This is possible using the Qt::InitialSortOrderRole role
in DiveTripModel::headerData().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the QHeaderView of DiveListView is now the authority
over sort-column and sort-order, it makes little sense
to keep these as member variables. That would only risk
inconsistencies. Remove them and query the QHeaderView
instead.
We still need to keep track of currentLayout, as we
have to detect if it changes to change the underlying
model from tree to list or vice-versa.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView code had a very fundamental problem with its
header: Each had its own idea of who is responsible for sorting.
Since we can't easily change QHeaderView, accept QHeaderView
as the authority on sort-column and order.
To make this possible, split the reload() function in two
distinct functions:
- reload() reloads the model and sorts according to the
current sort criterion.
- setSortOrder() tells the header to display a certain
sort criterion. If this is a new criterion, it will then
emit a signal. In this signal, resort according to that
criterion.
Thus, the actual sorting code has to be moved from the
headerClicked() to a new sortIndicatorChanged() slot.
Morover, the sorting of the QHeaderView has to be used.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModels are sorted in *reverse* chronological order.
Therefore, when comparing a dive against a trip, the dive has
to be inserted if the dive has a *later* date. Change the
comparison accordingly.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The generic addInBatches() function is used to add batches of
contiguous sets of dives to the dive-list models. The loop
searching for the end of the batch used the wrong index and
would therefore not properly cut the batches.
Fix this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 6dc1d239f8 introduced a
well-defined sort order in the case of equal contents. It changed
the code for sorting by date to simply use the order of the
source model.
BUT: The source-model was already sorted in descending order
on date. Thus setting the default order on descening by date,
the data was then presented as *ascending* by date.
Change this back to descending by always using default-ascending
in the filter model.
Ultimately, the source model should simply reflect the ordering
of the core-data (ascending on date), but such a change is
too invasive shortly before release.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an "important" message that the support is experimental
and that the latest version of Windows 10 and drivers is needed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For unrecognized locales we use en_US by default. It makes much more sense for
South Africa to use en_GB.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive list was sorted using the default-sorter of
QSortFilterProxy model. This is mighty inflexible as it
considers only one column. This has the funky effect that
for rows with identical elements, the sort order depends
on the previous sorting.
Implement a lessThan() function in the MultiFilterSortModel,
which simply hands the sorting down to the actual model.
This might be considered a layering violation, but it makes
things so much easier.
Sadly, it seems like the column-to-be-sorted is transported
in the provided indices. Therefore, the comparison is chosen
using a switch for *every* comparison. It would seem much
more logical to set a function pointer once and use that.
Further investigations are necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::reload() was called for full reset of the dive list
and for changing the view (tree vs. lis) in DiveListView::headerClicked().
Since the latter does sorting by itself, a parameter "forceSort" was
introduced, which defaulted to true, but was set to false by
DiveListView::headerClicked().
To remove complexity, simply let DiveListView::headerClicked() set
the view by itself and remove tha parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The QHeaderView::sectionPressed() signal was connected everytime
the list-view was reset. Likewise, setSectionsClickable() was
set to true everythime the list-view was reset.
Once in the constructor is enough.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The data-flow from C-core to list-view is as follows:
C-core --> DiveTripModel --> MultiSortFilterModel --> DiveListView
The control-flow, on the other hand, differs as DiveListView
accesses both MultiSortFilterModel and DiveTripModel, whereas
MultiSortFilterModel is mostly unaware of its source model.
This is in principle legitimate, as the MultiSortFilterModel might
be used for different sources. In our particular case, this is
not so. MultiSortFilterModel is written for a particular use case.
Therefore, model control-flow follow after data-flow: Let MultiSortFilterModel
set its own source model and DiveListView access the MultiSortFilterModel,
which then manages its source model.
This is not bike-shedding, but will enable a more flexible and
higher-performance sorting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the height was zero, when pulling down the dive list for refresh,
the filter input line would still be visible. With this fix it no longer is.
Also remove unused property.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
