...rather than use a global variable and a macro.
This should be a no-op in preparation to allow planning
several versions of a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is really unrelated to my recent "multiple gas pressures" work, but
the test case from Gaetan Bisson showed that the logic for which
cylinders to show in the equipment tab was less than optimal.
We basically used to show only cylinders that were actively used, unless
you had the "display_unused_tanks" preference option set. That comes
from some dive computers reporting a *lot* of cylinders that the diver
really doesn't even have with him on the dive. And showing those extra
dummy cylinders gets pretty annoying after a time, which is why we
default to not showing unused tanks.
However, in Gaetan's case, he had a total of four cylinders on the dive:
the O2 and diluent bottle for the rebreather dive, and then bailout
bottles (both air and deco). And while the bailout bottles weren't
actually used, Gaetan had actually filled in all the pressure details
etc for them, and so you'd really expect them to show up. These were
*not* just some extraneous default cylinder filled in by an over-eager
dive computer.
But because the bailout wasn't used, the manual pressures at the end
were the same as at the beginning, and the "unused cylinder" logic
triggered anyway.
So tweak the logic a bit, and say that you show cylinder equipment not
only if it has been used on the dive, but also if it has any pressure
information for it.
So the o nly cylinders we don't show are the ones that really have no
interesting information at all, except for possibly the cylinder tank
type itself (which is exactly what the over-eager dive computer case
might fill in, usually in the form of a default cylinder type).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
getRole() returns a QVariant and the cast is a small overhead.
Using these helpers will reduce the overhead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getMapLocationForUuid() accepts a UUID, searches the MapLocation table
and returns a pointer.
Make use of the new method in setSelectedUuid().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Inside the QML Map class there is a MapItemView item.
This item uses a delegate that receive a "model" property from
the MapLocationModel, but infact that's a QObject with the MapLocation
defined properties. That's how MapItemView works.
The problem here is that "model" QObject cannot be cast back
to a MapLocation as the meta data in there does not include
a MapLocation sub-class, for some reason.
Even if using propery() on that QObject to fetch data like coordinates
works, instead of storing this strange object pointer, store the
MapLocation UUID (from dive_site) which is a uint32_t.
setSelectedUuid() deals with this oddity and finds the correct
MapLocation pointer in the table and dispatches a selectedLocationChanged()
signal for it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The "uuid" property will be the one from the dive_site. At first it
will also be used to track the active marker/flag selection.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method should be used if many markers are added at once.
It's main purpose is to reduces the number of beingInsertRows()
calls.
Make MapWidgetHelper::reloadMapLocations() use it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- add() will be used to add a MapLocation to the model with
beginInsertRows()...endInsertRows()
- clear() will be used to clear the model with beginRemoveRows()...
endRemoveRows()
NOTE: emiting dataChanged() does not seem to update the QML view for
this model so calling being<..>Rows() seems to be the "correct Qt
approach" to do this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map widget requires a QAbstractListModel based model to operate
with good performance. Technically gpslistmodel.cpp can be used for that
same purpose (e.g. has GPS coordinates), but the way it updates
may complicate the Map widget integration.
Thus, a new model is created - MapLocationModel, with items of type
MapLocation, for an attempt for a clean project structure on the C++ side.
For now it only handles latitude and longitude.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks "Accept" when no dives were downloaded we would otherwise
dereference unitialized memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why we are setting lastIndex to -1. That seems odd.
But for now this workaround will have to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you start a new session with Download from DC, clear out the table
from the last attempt before adding the page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.
TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.
Without this patch TankInfoMode::data() can cause a SIGSEGV.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The used time format was h:mh: i.e. 1:16h:
This patch gets rid of the colon after the hour indicator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they get correctly prepared and derived data fields
get populated. For example, the dive number gets updated if
these are indeed the newest dives.
Fixes#408
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I noticed this in the mobile download code when fixing an unrelated
issue - and then realized that the same was true in the desktop app
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When (with mobile on desktop) loading from DC is called and the dive computer
to connect to is not in download mode, the repopulate() function is called
with an empty dive table. This trips the assert (obviously, debug compile only) in
DiveImportedModel::setImportedDivesIndexes(). This simple fix makes things just
more robust.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This already takes into account which of those dives were selected.
Right now all we have is select all or none - this needs actual support
in the UI, but once that's there, it will just work (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still to do:
- select the dives to save
- record the downloaded dives
but download is already working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.
There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.
I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
We now respect the settings in the preferences and also only show
the duration as minutes and seconds if the dive is a free dive.
Fixes#361Fixes#362
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
See https://github.com/Subsurface-divelog/subsurface/issues/345. The
menues where not translated. The basis of this error is a simple
typo in core/taxonomy.c where the classname was mis-spelled in the
QT_TRANSLATE_NOOP. In addition, to pull and translate the strings
from C code, the normal tr() does not work, and the functionality
from the gettextfromc class is used.
Fixes: #345
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With current code when re-planning a dive the planner output in the
dive notes is always moved down by one line.
This fix avoids that this additional line break is added.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is another attept at the problem if identifying a potentially
user supplied text in the dive notes upon replannig a dive.
It gets rid of the user visable position markers (*!* and ***) and
cirumvents problems with mark-up by first converting the old notes
to plan text (assuming that user only enters plain text in the notes
field as we do in other places as well). Then the automatically added
part is identified by locating the disclaimer in the text (if the user
edited/delted the disclaimer or changed langue in between it is her
problem to manually delete the old plan).
Everything from the disclaimer on is deleted and replaced by the new plan.
If the disclaimer is not found, the new plan is appended to the old notes.
This way we make sure no information gets automatically deleted.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When replanning a dive, the setpoint information from the profile waypoints
were reset to 0, resulting in a dive that has a dive mode of CCR, but only with
OC legs in the profile. This is just wrong, and is corrected here. Notice
that there is no averaging involved (in the reduction of a replanned real
dive that has more than 100 waypoints) as is done for depth. This is just
fine for setpoint data.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
New strategy to identify old planner output in notes when
replanning a dive: Text anchors ("*!*" and "***") added for planner output
For backwards compatibility: If there is no anchor but an old table
delete everything.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Don't add the last stop with addstop for correcting the lenght
of the dive if planner generated points can be removed when replanning.
Otherwise this will not be deleted when replanning a dive.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.
This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.
This patch also adds translation markers for the deco model name strings..
Fixes#285
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Second attempt to do the thing with the red background color for cylinder
start and end pressure correctly. This now should cover all scenarios.
This rewrites and partitially reverts commit b8e044d
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Display the correct trash or trashforbidden icon and tooltip in the cylinder table.
This should fit together with if it is really possible to remove a cylinder.
Search for "same gas" based on used cylinders only. Otherwise one could remove
a used cylinder because there is an unused cylinder with same gas.
ToDo:
In planner update trash icon on change of planner points.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the cylinder table today the cylinder start and end pressure fields
are marked red and the end pressure font is set to italic if cyl->end is 0.
But sometimes with planned dives there is no cyl->end but only cyl->sample_end.
This is taken into account now.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
The Qt model sorting for the dive date was using a unsigned number,
which doesn't work for dates before 1970.
Also, the dive date parsing got the year 1900 wrong. Not that we really
care, because other parts of date handling will screw up with any date
before the year 1904. So if you claim to be diving before 1904, you get
basically random behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the function in every place instead of once using it and once copying the code again.
No functional change.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
It's not too clever to give 0 a special meaning (as here:
use same gas as for previous leg) when 0 is a legitimate
value.
This should solve Willem's gas disappearance problem when
reediting a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.
This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Gas switches appear as special samples with zero or one second duration.
Those can be confusing when they appear as zero duration in the dive plan
when replanning, so better suppress theose.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This reverts commit adaeb506b7.
commit a8e8d56ec0 ("Tweak cylinder equipment tooltips") does a much
better job allowing the user to know the true volume of the cylinder
(given the gas entered) and clutters the UI a lot less.
While playing around with the current subsurface, I realized that while we
give the gas volume and Z factor for the beginning/end pressures in the
newly added tooltips, there is no way to actually see that same
information for the working pressure.
So if you have filled in cylinder type information, but don't have any
actual gas usage information, there will be no cylinder tooltips at all.
But you might still want to know what the actual volume for a particular
cylinder is, and what the Z value for that working pressure is.
So this tweaks the tool-tips a bit.
When mousing over the pressure fields (ie "working pressure", "start" and
"end"), it now always gives the cylinder gas volume and Z factor for that
pressure, so for example on an AL72 that has a working pressure of 3000
psi and that contains air the tooltip will say:
69 cuft, Z=1.040
when you mouse over the working pressure field (that's obviously with
imperial units, in metric you'll see liters of gas).
When mousing over the type/size field, it gives the used gas amounts, ie
something like this:
37 cuft (82 cuft -> 45 cuft)
but if the cylinder doesn't have starting/ending pressures (and thus no
used gas information), this patch will make subsurface show the working
pressure data instead, so that you at least get something.
This all seems more useful than what my first version gave.
NOTE! This makes commit adaeb506b7 ("Show both the nominal and "real"
size for an imperial cylinder") kind of pointless. You now see the real
size in the tooltip when you mouse over the size, and now it actually
works both for imperial and metric people, so the tooltip is in many ways
the better model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds tooltips for the equipment tab for each cylinder, showing the
amount of gas used.
When you mouse over the size and working pressure fields, the tooltip will
show the amount of gas used (along with start and end gas volumes). And
when you mouse over the start and end pressures, it will show the start
and end gas volumes, and the Z factor used.
I started doing this because of the gas volume questions in the last day
or two (and a few from a few weeks ago). When even Robert Helling starts
wondering about the effects of compressibility on the SAC calculation, our
numbers are clearly too opaque.
With these tooltips, at least you can see what went into the used gas
calculations, instead of having to add debugging options to print out Z
factors.
[ This patch also adds a "rint()" to get the rounding right in the
gas_volume() function. Although rounding to the nearst milliliter
really doesn't matter, it's the right thing to do after doing FP
calculations ;^]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By using SettingsObjectWrapper, the planner settings can be saved and restored
correctly
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Please apply this patch on top of the previous patch with the same title.
1) Provide icons with white margin to look more like photos
2) Optimise code, following Robert's suggestions.
3) Column heading for photos column is now: Photos. This takes up extra
horizontal space but makes the user interface more understandable.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Add an extra column to dive list, just left of Locality field.
2) For each dive, give summary of photos as follows:
i) no photos: no icon in that column
ii) photos taken during dive: show icon of fish
iii) photos taken before/after dive: show icon of sun
iv) photos taken during as well as before/after dive: show
icon with both fish and sun
3) Provide information for the sort operation to work on
this column of the dive list.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can happen when the user asks to replan a dive that
was imported from CSV.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call GasSelectionModel::instance()->repopulate() when creating the initial
simple dive. Without this call, the gas selection dropdown list does not work
in the DivePLannerPointsModel table until the cylinders table has been edited.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b1ed04a means that DivePlannerPointsModel::rememberTanks() and related
functions and variables are no longer required
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit aa1446bed2 ("Make filters work again in master") makes filters
work again for the desktop app, but breaks building Subsurface-mobile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since 6cd711a1 filters don't work. This went unnoticed because the
commit wasn't applied on v4.5-branch.
Partially reverting it makes filters work again.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option to calculate the best mix portion of O2 and He for the dive's max
depth if the user enters * in the MOD and MND cylinder fields. Gas portions
are automatically recalculated if the max depth of the dive changes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switch depth of a decompression gas is its MOD. By renaming the heading to
"Deco MOD", it is more clearly distinguished from the bottom MOD, and it is
more obvious how they relate to the Bottom pO2 and Deco pO2 preferences.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds fields to the planner cylinder model for maximum operating depth (MOD)
for a bottom mix gas, and maximum narcotic depth (MND). Fields are read/write,
so changing MOD changes %O2 and vice-versa. Changing MND changes %He and
vice-versa.
When setting MOD directly, the %O2 is truncated (rounded down) to an integer,
which re-calculates the MOD, which is sometimes a few metres greater than the
input depth. This is desireable behaviour, as the rounding is conservative.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fix is reasonably straightforward when the divedatapoint structure stores
the cylinder rather than gasmix.
Fixes#970
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A few basic rules for gas validation:
We can't have <0%, or >100% of either O2 or He
O2 + He must not be >100%
Switch depth can't be <0%
This places limits on user-input values
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows calculation and selection of best mix in the planner cylinder
entry, by entering the gas depth, followed by "b" for best (trimix) mix, or
"bn" for best nitrox mix.
The UI is not intuitive, but it is quick and easy. At the very least, it
should be documented.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the value for "use" is negative or larger than the number of
elements in "enum cylinderuse", later CylindersModel::data() can
request a string in the lines of cylinderuse_text[cyl->cylinder_use],
which can SIGSEGV.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of the time we are adding all the dives, so do this in a single model
operation. This makes the case when adding a single dive (in the undo delete
function) slightly more complicated, but that seems totally worth it for the
speedup in the common case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the planner, for recreational mode, there is a setting indicating
the pressure at which the diver should be back at the surface. This
pressure was hardcoded to bar.
Fixes#1027
[Dirk Hohndel: small modifications, more reasonable step for psi,
more reasonable maxima]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the context of the iOS port and shouldn't impact any of the
other builds.
[Dirk Hohndel: refactored the iOS patches]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops, I forgot to take the sort model on top of the model into account.
Now everything should stay consistent - ListView order when accessed from
QML, but internal order when accessing the underlying array.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive list might contain dives in the future, don't add the new dive to
then end but instead add it at the correct spot in the list
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is questionable, but perhaps useful.
When showing imperial cylinder sizes, show both the nominal value (with
no compensation for compressibility of the gas) and the "actual" amount
of gas the cylinder contains.
So an AL80 will show as a size of "80 (77)cuft", because while 80 is the
nominal size, the actual amount of gas that will fit is just 77 cuft.
[Dirk Hohndel: adjusted to take translation of the unit into account]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had two totally different usage cases for "get_volume_string()": one
that did the obvious "show this volume as a string", and one that tried
to show a cylinder size.
The function used a magic third argument (the working pressure of the
cylinder) to distinguish between the two cases, but it still got it
wrong.
A metric cylinder doesn't necessarily have a working pressure at all,
and the size is a wet size in liters. We'd pass in zero as the working
pressure, and if the volume units were set to cubic feet, the logic in
"get_volume_string()" would happily convert the metric wet size into the
wet size in cubic feet.
But that's completely wrong. An imperial cylinder size simply isn't a
wet size. If you don't have a working pressure, you cannot convert the
cylinder size to cubic feet. End of story.
So instead of having "get_volume_string()" have magical behavior
depending on working pressure, and getting it wrong anyway, just make
get_volume_string do a pure volume conversion, and create a whole new
function for showing the size of a cylinder.
Now, if the cylinder doesn't have a working pressure, we just show the
metric size, even if the user had asked for cubic feet.
[Dirk Hohndel: added call to translation functions for the units]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's possible that this will create an out of order dive list, but it
seems the most consistent way to do things and to avoid more than one dive
with the same dive number (which could have happened if you add several
dives manually that are not the newest dives in the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I tried various things to do this from QML but it just doesn't seem to
work at all. So I gave up and instead added a trivial helper function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
