This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the combobox to disabled if the profile is in
any mode besides PROFILE.
Fixes#824
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b72c32da7 turned off replotting while the cylinder
combo box was active to speed up editing. After leaving
the combo box, replotting was enabled again and a replot
was called.
This replot is too agressive, as it overwrites the displayed
dive with the current dive and thereby resets the cyinder
change. This eliminates the replot call.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since replotting is expensive and it is triggered while scrolling
through the list of cylinders, better not do it for improved
user experience and replot only after the combo box loses
focus.
I hope this...
Fixes#768
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Compute the default widths for the columns in the dive trip list from
their header and (expected) content length rather than some fixed pixel
sizes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default IMG_SIZE and SPACING in the StarWidget are not appropriate
for HiDPI displays. Replace them with StarMetrics which are
auto-computed from the (default) font size (which Qt determines from the
display DPI settings).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits a24eb8ac12 and 0b0860d24a introduced a nasty hack that was
needed back then to make tank and weight selection work on the Mac. But it
caused other unpleasant issues (as mentioned in the commit messages).
I re-tested this with the current Qt5.3 based builds on Mac and this hack
is no longer needed.
Fixes#638
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Well, the information was bad, it was being printed twice
if the text is HTML, print only once.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just adds the HTML Delegate to print the text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know if this fixes anything, but it is asked of us to
do that by the Qt docs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a HTML delegate to show rendered HTML on print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ugh. Each time you wanted to change a cylinder, a new connection was
being created on this object, delaying the correctly setup of the item.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you entered part of the name of a cylinder this was
being treated as a new cylinder, and not selecting the first
one.
Fixes#628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text selection was not being set, bummer.
See #628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the Set point spinbox, it was kinda hard just stepping by the
default 1.0, so setting it to step by 0.1 makes much more sense.
The int SpinBox got a step size parameter for consistency.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous code used qreals, but it feels clearer to use doubles when
the name of the class contains the word double. The performance loss of
using doubles instead of floats on arm is non-existent in this case.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on Glance's idea on rewritting the Delegates, but
we don't need to redo the wheel as Qt already gives us
the correct Delegate, we just need to set some boundaries
on it before returning.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, clean a few calls, this should make the widget a tiny
bit faster. This patch also moves the grayImage function from
the star widget to the global scope, so I can use it on the
Calendar widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds more handling of missing actions for the mouse on
the equipment edition. It complements the stuff talked about
on bug 359, but it's a different issue. 359 seems already fixed.
See #359
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The handling of keyboard is broken on Qt inside QComboBoxes.
I'm trying ( and losing ) to make it less broken. This patch makes the
code work reasonably well if you press Key_down or Key_up after having
displayed the filter popup, which is different from the combobox popup for
some reason.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same code that Dirk used on the Mac to fix the
bad-behavior of Cylinder Selection, this time applyed to
Weigthsystem selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the class created by the previous patch
to get rid of the CSS and be really desktop native. it
fixes a lot of stuff in non-blue-styles and throws
a lot of code away. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The css was done by me in the first days of subsurface for Qt, and it
was a code that I was never proud of. Mostly because I tougth at the
time that it was better to write it into CSS than to create a new class
just to take care of the size of the default cell height on a tree view.
Now I see that it was a biased approach since it created issues on
dark color schemes and it also didn't make a 'native' experience on
Gnome or OSX, only on KDE.
This fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an ugly hack as it partially breaks the ability to abort a selection
(so if you click outside of the combobox, the last value you hovered over is
selected). But this seems much better than not being able to select a different
tank at all.
Fixes#275
(and by 'Fixes' I mean "hacks to sort of make work"... but the trac automation
is rather inflexible in which words it understands...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the gases for which we have cylinders are offered in the gas selection
list and correctly recognized and added for the plan.
Still tons of work to be done to make this work the way it is designed,
but we are getting closer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This Patch fixes the tab behavior on the QComboBox
delegate. For a QComboBox, tab was being treated as
'cancel' action on edit, but since it will send a
editingFinished() signal, and the Qt::Key_Return
will also send a editingFinished() signal, I couldn't
use that method and had to do a little hack around it.
The code is mostly clean and works.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
"Weight" was misspelled "weigth" in several places in the code
and comments.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Gtk+ style on the Gnome shell is somewhat broken on Qt for
some reason. This hack pokes the system, checks if it's running
gnome-shell, and if the current style is gtk+ ( I couldn't just
check for gtk+ since it worked on XFCE and other Gtk based enviro
ments. so a double check is needed. ) then I changed the Pallete
of the affected widgets by hand.
not a pretty hack but worked.
[Dirk Hohndel: redid the patch to be simpler and more consistent]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the cylinders and weigth edition
by keypress. I don`t know when I broke this and linus found,
most probably when I added the code for showing the
cylinder size and working press while moving the mouse
around the list - sorry guys.
So, now this *seems* fixed, tested for a fairly good
amount of time and everything seemed ok.
I was unable to reproduce the behavior that linus got
on two value overlapped on each other, tougth.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Since the cylinders and weigths have other data attached
to it, like size and working pressure, one could mess the
other data and want it to revert to the cylinder / weigth
defaults, but for that the user had to choose another
item, then go back to the previous one, so the cache would
be clean.
This patch fixes that by reverting the values to the
it fixes linus bug n2, where he had invalid data
on the other fields and had to go back and forth for it
to be fixed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
