After some feedback on the mailing list, bitwise XOR wasn't the
preferred way to build the gaschange event.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After some feedback on the mailing list, these strings where preferred.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the great work done by Søren Reinke's on his MKVI Logfile
Analyzer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0d7c192e6e ("For CCR dives, the diluent cylinder is the
current cylinder") a few things got broken. This tries to undo those
changes and adds expanded XML output.
1) Calculate correct partial pressure of oxygen to be plotted on
dive profile, taking into account the oxygen sensor data.
Currently, erroneously, OC PO2 values are shown, due to an
erroneous calling parameter to fill_pressures().
2) Read start and end cylinder pressured correctly. some wrong
assignments were done in file.c. This is now corrected and the correct
cylinder pressures are shown in the equipment tab.
3) Write correct cylinder pressures to XML. Currently the data for
the two cylinders are written to XML the wrong way round
(diluent pressures = oxygen and vice versa).
4) Expand XML output:
a) Write oxygen sensor data to XML
b) Write no_of_02sensors to XML
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the meaning that _the_ cylinder (as we treat it in OC dives) is the
diluent cylinder (rather than the O2 cylinder). This eliminates special
cases. Now, for CCR, we have to handle the O2 cylinder in addition
(rather than the diluent in addition).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a time linear gas interpolation strategy. Some minor changes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements import from Suunto DM5 database, but there is something
wrong with some of the sample dives in the database I received as
sample. It seems that we should detect missing/bogus data and treat it
properly as divelogs.de does with the same dives. Anyway, when we have
proper data, this import appears to produce sensible results.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rather than overflowing the notes field, let's add all the details from
DC using the extra data API.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Naturally the pressure counters and cylinder index must be reset to zero when
reading in a new Poseidon dive log.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently the gas pressures stored in structures of pressure are
calculated using the gasmix composition of the currently selected
cylinder. But with CCR dives the default cylinder is the oxygen
cylinder (here, index 0). However, the gas pressures need to
be calculated using gasmix data from cylinder 1 (the diluent
cylinder). This patch allows setting the appropriate cylinder
for calculating the values in the structures of pressure. It
also allows for correctly calculating gas pressures for any
open circuit cylinders (e.g. bailout) that a CCR diver may
use. This is performed as follows:
1) In dive.h create an enum variable {oxygen, diluent, bailout}
2) Within the definition of cylinder_t, add a member: cylinder_use_type
This stores an enum variable, one of the above.
3) In file.c where the Poseidon CSV data are read in, assign
the appropriate enum values to each of the cylinders.
4) Within the definition of structure dive, add two members:
int oxygen_cylinder_index
int diluent_cylinder_index
This will keep the indices of the two main CCR cylinders.
5) In dive.c create a function get_cylinder_use(). This scans the
cylinders for that dive, looking for a cylinder that has a
particular cylinder_use_type and returns that cylinder index.
6) In dive.c create a function fixup_cylinder_use() that stores the
indices of the oxygen and diluent cylinders in the variables
dive->oxygen_cylinder_index and dive->diluent_cylinder_index,
making use of the function in 4) above.
7) In profile.c, modify function calculate_gas_information_new()
to use the above functions for CCR dives to find the oxygen and
diluent cylinders and to calculate partail gas pressures based
on the diluent cylinder gas mix.
This results in the correct calculation of gas partial pressures
in the case of CCR dives, displaying the correct partial pressure
graphs in the dive profile widget.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is one of the warnings that I agree with. The original code was very
hard on my eyes... the explicit comparison to NULL is just so much easier
to understand when reading the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse date information from Seabear log file and skips the
"header" data to allow parsing of the CSV content.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I fixed up the decode and finished the parse for Cochran EMC, Commander
and Gemini computers. I suspect that this code may only work with files
from certain versions of Cochran Analyst. It works with my own CAN files
and with the samples that came with Analyst v4.01v.
A seemingly arbitrary offset of 0x4914 is needed to access data.
The previous code uses 0x4a14 and 0x4b14. I suspect these are from
different version of Analyst.
[Dirk Hohndel: whitespace cleanup, add files to subsurface.pro, made sure
this compiles without the corresponding patch to
libdivecomputer (that isn't upstream, yet), cleaned up the
usage of structs, removed a few unused variables]
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the setpoint value is initialized as zero, we have to set the
previous value if we do not have a current reading.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing the logs from a Poseidon MK6
rebreather. This DC produces logs that contain of a .txt file that has
all the meta data and a .csv file that contains the sample readings. The
CSV file is different from the others in that it has a line per each
sample reading at given time. Thus we have to merge all the lines from
one point in time into one sample reading of ours.
[Dirk Hohndel: addressed some compiler warnings]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not do XML parse on pictures. Currently just ignore them, in the
future we might want to save them somewhere and include them in
Subsurface logs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead, just encode the git repository information in the filename.
We want to make it much harder to make it match a real filename, but to
still allow easy browsing with the file manager interface. So the git
repository "filename" format is the path to the git repository
directory, with the branch name encoded as "[branch]" at the end rather
than the "path:branch" format that we used in the descriptor file.
[ For example, on Windows, a filename like "c:\my.xml" could be
interpreted as the branchame "\my.xml" in the repository in the
directory "c" ]
In particular, with this model, no filename that ends with ".xml" could
possibly ever be considered a git repository name, since the last
character of a git pathname is always ']'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It doesn't actually parse the files themselves, but it does walk the
object tree and print out the dives and trips it finds.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather academic, but it will make Coverity happy.
If we start running out of memory we should make sure we don't leak any
more memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sqlite database from Shearwater Desktop log software is imported. Just
the basic information like location, buddy, notes and dive profile
(depth and temperature).
This is tested with a DB in Imperial units, thus metric input might
contain errors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the opening of DB connection to occur before DC dependent code.
This way we can try to detect log software before calling the DC
dependent import function. This prepares for adding support for
Shearwater sqlite database.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an entry to the dive list context menu to load images. The user
can select image files and set a time offset to align camera and dive
computer clocks.
Using the exif time stamp the images are tried to match to the times of
the selected dives (with a grace period of an hour before and after the
dive). Upon success an event of type 123 is created per image with the
string value being the path to the image. Those images are displayed as
thumbnails in the profile. If the matching dive does not yet have a geo
location specified but the image provides one it is copied to the dive
(making the camera a poor man's companion app).
This patch includes easyexif https://code.google.com/p/easyexif/ which is
originally under a New BSD License to parse the image meta data.
This commit includes a new test dive dives/test31.xml with a matching
image wreck.jpg to try out the functionallity.
Obvious to do's:
Have images on the map
Have the images clickable
Have a proper picture viewer
Give visual reference for image time shifting.
Use the new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function wraps up the parsing of manually kept CSV log files. Set
up parameters received from C++ code for use in XSLT.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will allow one to give CSV tag as parameter when importing CSV
files. On normal case one will use csv, but when special handling is
needed we can give a specific XSLT file instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As importing files is now done through "Import Log Files" menu option for all
file types, the message directing users to use the specific "Import CSV Log Files"
non-existent menu entry should not be presented any more.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds use of everything from the new wrappers(), but the
opendir() one.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If realloc moved the memory, we shouldn't try to access it. realloc
copied that memory so access it via the new function instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
