Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function
1) was misnamed: it determined the time of the first selcted dive.
2) had only one caller.
3) would crash if there was no selected dive.
Let's just fold the functionality into the caller. It's a one-liner
anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In an effort to reduce the size of dive.h and dive.c, break out
the event related functions. Moreover event-names were handled
by the profile-code, collect that also in the new source files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the DiveComputerDialog, which does not exist
anymore. The new tab uses the function in the corresponding
sorted model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Desktop does not use mark_divelist_changed() anymore - all is done
via the undo machinery. Therefore move this function (and its
counterpart unsaved_changes()) to qmlmanager.cpp.
Ultimately, it probably should be removed from there as well, but
currently I don't dare to touch all the cloud-logic!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to unify both methods of tracking unsaved
changes. Since desktop now only uses the undo system, it can
be replaced by a single call to "Command::setClean()".
Arguably, the UI is the wrong place to do this and the appropriate
calls should be done by the core. However, let's play it safe
for now and avoid any breaking change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unsaved changes are now kept track by the undo-system. No need
to test for this function when directly modifying the core
data structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to unify both methods of checking for
unsaved changes: the global unsaved_changes() flag and the
Command::clean() function of the undo-system.
However, all desktop functions are now undoable and therefore
the function is not needed and can be replaced by calls
to !Command::clean().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of modifying the device table directly, call the undo
commands. Moreover, don't keep our own copy in the mode - show
the original version. Connect to the appropriate signals.
This means that the calls from the DiveComputerManagement
dialog have to be removed, since this mode of editing is
not supported. The whole dialog will be removed in a future
commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To implement undo-semantics, we want a longer-lived dive-computer-model
(currently, it is regenerated when the dialog is opened). Therefore, it
must be reloaded when the core data is reset. Do this like for other
models: listen to the dataReset() signal of DiveListNotifier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo machinery will need a method to remove devices based
on their index instead of their name. Add it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to include dive computer names in the undo system,
there should be visual feedback on undo/redo.
This would mean opening the divecomputer dialog, which would
appear quite strange. Therefore, add a tab. This is not ideal,
but consistent with the dive site tab, which probably shouldn't
be there either. In the future, the UI needs some rethinking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add commands for deleting devices and editing device nicknames
to include the device-handling in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Technically get_dive() could return a nullptr. The existing code made sure the
argument passed to get_dive() was one that always would result in a valid dive
pointer being returned. The new code is only slightly less efficient but allows
a static code analysis to easily see that we don't derefence NULL pointers here.
On some level this change is unnecessary. But it's also not wrong.
Fixes CID 354762
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Technically get_dive(i) could return a nullptr. But given the range for i that
can never happen. Still, the test is extremely cheap and doesn't hurt.
Fixes CID 354768
Fixes CID 354766
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we should see the output and hopefully be able to figure
out why that silly test keeps randomly failing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The device nodes are created for all DCs, when importing the
dives. There is no point in creating only the device node for
the first DC in fixup_dive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the specuial case of suunto, where we may add a device directly
instead of via dive->dc, add the device to the provided table.
The caller will then pass on the new device to the undo system.
This makes downloading finally really undoable (at least I
hope so). So far, the dives and dive sites were removed, but any
new device remained.
However, when setting the device-id via serial, we now have
to check both, the global and the downloaded list of devices.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In one weird case (suunto), the code in libdivecomputer.c
generates a device node directly instead of going the usual
way (setting the data in the dc-structure of the imported
dive). It is unclear to me whether that has to be that way,
as it depends on the chronological order of callbacks to
event_cb() and dive_cb().
Therefore add a device_table pointer to device_data_t
so that the downloader can add the device to this table. This
only adds the pointer, but does not yet use it in the
downloading code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The same structure was defined as "struct dc_user_device_t"
and typedefed as "device_data_t". Unify this. Since there
are much more of the latter, remove the former.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, we added a non-global device table to the parser states.
Now, create device nodes in that table instead of in the global
table. Thus, on undo of dive-import, the new device nodes will
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the xml-parser add a device-table to git's parser-state.
Currently this is unused. In upcoming commits the git parser will
then be changed to add device nodes in this table instead of the
global device table. The long-term goal being to detach the
parsers from global state and to make dive-import fully undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function was misnamed in that it doesn't set the nickname
of a device. Instead, it adds all (unknown) devices of a
dive to the/a device-table. Let's call it appropriately.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To include the device code in the undo system, we need functions
to check for the existence of devices and to add or remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to avoid the parsers to directly modify global data,
we have to provide a device_table to parse into. This adds such
a state and the corresponding function parameters. However,
for now this is unused.
Adding new parameters is very painful and this commit shows that
we urgently need a "struct divelog" collecting all those tables!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The interaction of Qt's drag & drop with GroupedLineEdit was
exceedingly weird. The user was able to scroll the viewport
making the text invisible.
This implements a very primitive alternative drag & drop
functionality: dropped text is regarged as a distinct tag.
This means that it is not possible to modify existing tags
by dropping in the middle of them. Arguably, this might even
be better than arbitrary drag & drop. But even if not perfect,
this fixes a very nasty UI behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the user manages to "scroll" through the QPlainTextEdit by
a drag&drop action, the state of the widget becomes inconsistent.
On the one hand, the text-block says that it has one line.
On the other hand, its layout says that it has no line.
When trying to fetch the line, a crash occurs.
Try to detect such a strange state and return early in
GroupedLineEdit::paintEvent().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Google play now requires that we show an explicit notification when turning
on background location. This is an attempt to fulfill that requirement - we
won't know if this is 'good enough' until we submit the app, though.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to need this when building our own libgit2 on older
distibutions. This shouldn't be needed anymore at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XML-parameter code is a mess. Ownership is unclear. Allocation
and freeing of strings is in different functions. Sometimes
only every second string is free()d, because keys are not copied.
But this is done inconsistently. The caller has to know how
many parameters the callee may add.
Instead, let's add a small helper-struct that uses C++ memory
management, but exports a C-API. The array for the XML-library
is generated on the fly.
This is only the implementation, the old code is not yet replaced.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently libdc gives us copies of strings. The API is very
scary, because (at least according to my reading of the code),
the key/value pair may be stored in a cache. Thus on free()ing
the string in the cache becomes invalid and we must not access
it twice. Very obscure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, the sorting of the devices was changed to be
case-insensitive for models for consistency reasons. However,
then the equality-comparison should also be case-insensitive.
Break it out into its own function, to avoid that mistake
in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dive-sites we would add to the global filter-preset
table. This data should be thrown away, just like the other tables
that might be imported.
This shows that we really should introduce a "struct divelog",
which collects all those tables into a single structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used a typedef "filter_preset_table_t" for the filter preset table,
because it is a "std::vector<filter_preset>". However, that is in
contrast to all the other global tables (dives, trips, sites) that we
have.
Therefore, turn this into a standard struct, which simply inherits
from "std::vector<filter_preset>". Note that while inheriting from
std::vector<> is generally not recommended, it is not a problem
here, because we don't modify it in any shape or form.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
filter_preset_table_t was defined as "void" for C code.
However, that meant that any pointer could be passed as
such a table and such a table could be passed as any pointer,
without generating compiler warnings.
Indeed, we had a parameter-mixup that went unnoticed.
Therefore, make filter_preset_t an anonymous structure with
the name filter_preset instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
