clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before that, the behaviour was that in case of an error or a
re-download, the progress bar would appear for a few milliseconds with
the old value.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
rint() is "round to nearest integer", and does a better job than +0.5
(followed by the implicit truncation inherent in integer casting). We
already used 'rint()' for values that could be negative (where +0.5 is
actively wrong), let's just make it consistent.
Of course, as is usual for the messy C math functions, it depends on the
current rounding mode. But the default round-to-nearest is what we want
and use, and the functions that explicitly always round to nearest
aren't standard enough to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should *not* default to the incorrect "1 bar". Instead, we should
leave the resuling pressure at 0 mbar, which leaves visual entries empty
and uses the default surface pressure for calculations.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Cc: Patrick Valsecchi <patrick@thus.ch>
Cc: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer already supports this, but we didn't save it.
Tested-by: Oscar Isoz <jan.oscar.isoz@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Libdivecomputer wants us to return true if it should continue to loop over
the dives and false if we want to stop. Don't pass errors back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Earlier we converted the C++ code to using true/false, and this converts
the C code to using the same style.
We already depended on stdbool.h in subsurfacestartup.[ch], and we build
with -std=gnu99 so nobody could build subsurface without a c99 compiler.
[Dirk Hohndel: small change suggested by Thiago Macieira: don't include
stdbool.h for C++]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some devices, the event data contains important data that is
required for parsing the dives, but which is not present in the full
memory dump.
Signed-off-by: Jef Driesen <jefdriesen@telenet.be>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C99 7.1.4, says nothing about passing NULL to fopen(),
which means that it isn't portable and there are no guaranties
that the return will be a NULL pointer or that that a library
implementation will not assert or SYSSEGV in the middle of the
fopen() branch.
libdivecomputer.c's 'dumpfile_name' and 'logfile_name' could
cause problems in that regard.
A possible fix for #411
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If first sample is not a DC_SAMPLE_TIME, we would have bin dereferencing
a null pointer.
This might actually never happen, unless we talk to a really weird dc,
but this makes the static analyzer happier.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is super-simplistic and also is kinda wrong. It forces all tanks that
haven't been specified by the DC (so far only Atomics Aquatics Cobalt and
UEMIS Zurich (which doesn't even use libdivecomputer) to be AL80. Just as
we used AL80 as default for manually adding tanks.
Obviously this needs to become an option where the user can pick.
See #145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem like a really odd change - but with this change the Qt tools
can correctly parse the C files (and qt-gui.cpp) and get the context for
the translatable strings right.
It's not super-pretty (I'll admit that _("string literal") is much easier
on the eye than translate("gettextFromC", "string literal") ) but I think
this will be the price of success.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer doesn't give the salinity in kg/l, but in g/l and
subsurface works with g/10l. So the salinity was too big by a factor
of 1000.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- remove the build flags and libraries from the Makefile / Configure.mk
- remove the glib types (gboolean, gchar, gint64, gint)
- comment out / hack around gettext
- replace the glib file helper functions
- replace g_ascii_strtod
- replace g_build_filename
- use environment variables instead of g_get_home_dir() & g_get_user_name()
- comment out GPS string parsing (uses glib utf8 macros)
This needs massive cleanup, but it's a snapshot of what I have right now, in
case people want to look at it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One cannot expect #ifdef to work with enum values. So the code for
getting the salinity was basically never compiled in. And it was
putting it in the wrong location anyway (in the dive struct instead
of the divecomputer struct where it is expected).
I took the opportunity to add the reading of the atmospheric pressure
as well.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This event is on when accumulating deco time. Once you reach the floor
deco time will start decreasing and the event will stop. Going below the
floor again will re-activate the event.
Also identify event type 13 in DM4 imports as airtime.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This data structure was quite fragile and made 'undo' when editing
rather hard to implement. So instead I decided to turn this into a
QMultiMap which seemed like the ideal data structure for it.
This map holds all the dive computer related data indexed by the model. As
QMultiMap it allows multiple entries per key (model string) and
disambiguates between them with the deviceId.
This commit turned out much larger than I wanted. But I didn't manage to
find a clean way to break it up and make the pieces make sense.
So this brings back the Ok / Cancel button for the dive computer edit
dialog. And it makes those two buttons actually do the right thing (which
is what started this whole process). For this to work we simply copy the
map to a working copy and do all edits on that one - and then copy that
over the 'real' map when we accept the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think it's self explanatory - When user clicks on
'Cancel', the interface will wait for the trhead to quit
then will close itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the skeleton code for a non-blocking ui-thread
It already creates the first-thread ( 'do not block the ui' )
and the second thread ('download from the dive computer')
We can in the future merge both in the same place - I didn't
want to do that now because the download function is written
in the libdivecomputer.c code, and I cant just transform that
to a QThread and use signals, so I used two threads for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A couple of these could clearly cause a crash just like the one fixed by
commit 00865f5a1e1a ("equipment.c: Fix potential buffer overflow in
size_data_funct()").
One would append user input to fixed length buffer without checking.
We were hardcoding the (correct) max path length in macos.c - replaced by
the actual OS constant.
But the vast majority are just extremely generous guesses how long
localized strings could possibly be.
Yes, this commit is likely leaning towards overkill. But we have now been
bitten by buffer overflow crashes twice that were caused by localization,
so I tried to go through all of the code and identify every possible
buffer that could be affected by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we download dives with libdivecomputer, we create this strdup'ed
name of the model information, but we then re-use that (single) strdup
allocation for every dive we download. This works fine *until* you
start freeing those dives (possibly directly after the download because
they are redundant), at which point things go to hell in a handbasket,
since there is just the one allocation for all the different dives.
Fix by just doing another strdup() at the point where we assign the
model information to the dive computer.
Reported-by: Marc Merlin <marc@merlins.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code forgot to reset the stopdepth to 0 which resulted in a
bogus safety stop being displayed on some divecomputers after the diver
finished their deco obligation.
Reported-by: Jan.Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This centralizes all occurrences of Kelvin to dive.h and standardizes all
usages to milliKelvin.
[Dirk Hohndel: renamed the constant plus minor white space cleanup]
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This moves the fields 'duration', 'surfacetime', 'maxdepth',
'meandepth', 'airtemp', 'watertemp', 'salinity' and 'surface_pressure'
to the per-divecomputer data structure. They are filled in by the dive
computer, and normally not edited.
NOTE! All actual *use* of this data was then changed from dive->field to
dive->dc.field programmatically with a shell-script and sed, and the
result then edited for details. So while the XML save and restore code
has been updated, all the displaying etc will currently always just show
the first dive computer entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer doesn't actually seem to support air temperature
reporting at all, but at least for Suunto dive computers the air
temperature is recorded as the temperature for the first sample.
So since we already have vendor-specific libdivecomputer hacks, let's
just add that one as a rule. It may be that other divecomputers do this
too, so this adds it as a generic concept - it's just that right now the
flag for "air temperature in first sample" is only set for Suunto dive
computers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer has started giving the Suunto serial numbers in a
different format, which means that we have the same device with two
different serial numbers, and then we need two different ways of turning
the numerical entity into a string.
Look at the number pattern to see figure out which version of the format
it is that libdivecomputer is reporting, and turn it back into the
original format so that we can reliably give the right string for it.
This also mean sthat the device ID stays the same regardless of
libdivecomputer version.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch centralizes the definition for surface pressure, oxygen in
air, (re)defines all such values as plain integers and adapts calculations.
It eliminates 11 (!) occurrences of definitions for surface pressure and
also a few for oxygen in air.
It also rewrites the calculation for EAD, END and EADD using the new
definitons, harmonizing it for OC and CC and fixes a bug for EADD OC
calculation.
And finally it removes the unneeded variable entry_ead in gtk-gui.c.
Jan
Signed-off-by: Jan Schubert <Jan.Schubert@GMX.li>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that the serial number returned by libdivecomputer isn't
really the serial number as interpreted by the vendor. Those tend to be
strings, but libdivecomputer gives us a 32bit number.
Some experimenting showed that for the Suunto devies tested the serial
number is encoded in that 32bit number:
It so happens that the Suunto serial number strings are strings that have
all numbers, but they aren't *one* number. They are four bytes
representing two numbers each, and the "23500027" string is actually the
four bytes 23 50 00 27 (0x17 0x32 0x00 0x1b). And libdivecomputer has
incorrectly parsed those four bytes as one number, not as the encoded
serial number string it is. So the value 389152795 is actually hex
0x1732001b, which is 0x17 0x32 0x00 0x1b, which is - 23 50 00 27.
This should be done by libdivecomputer, but hey, in the meantime this at
least shows the concept. And helps test the XML save/restore code.
It depends on the two patches that create the whole "device.c"
infrastructure, of course. With this, my dive file ends up having the
settings section look like this:
<divecomputerid model='Suunto Vyper Air' deviceid='d4629110'
serial='01201094' firmware='1.1.22'/>
<divecomputerid model='Suunto HelO2' deviceid='995dd566'
serial='23500027' firmware='1.0.4'/>
where the format of the firmware version is something I guessed at,
but it was the obvious choice (again, it's byte-based, I'm ignoring
the high byte that is zero for both of my Suuntos).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This clarifies/changes the meaning of our "cylinderindex" entry in our
samples. It has been rather confused, because different dive computers
have done things differently, and the naming really hasn't helped.
There are two totally different - and independent - cylinder "indexes":
- the pressure sensor index, which indicates which cylinder the sensor
data is from.
- the "active cylinder" index, which indicates which cylinder we actually
breathe from.
These two values really are totally independent, and have nothing
what-so-ever to do with each other. The sensor index may well be fixed:
many dive computers only support a single pressure sensor (whether
wireless or wired), and the sensor index is thus always zero.
Other dive computers may support multiple pressure sensors, and the gas
switch event may - or may not - indicate that the sensor changed too. A
dive computer might give the sensor data for *all* cylinders it can read,
regardless of which one is the one we're actively breathing. In fact, some
dive computers might give sensor data for not just *your* cylinder, but
your buddies.
This patch renames "cylinderindex" in the samples as "sensor", making it
quite clear that it's about which sensor index the pressure data in the
sample is about.
The way we figure out which is the currently active gas is with an
explicit has change event. If a computer (like the Uemis Zurich) joins the
two concepts together, then a sensor change should also create a gas
switch event. This patch also changes the Uemis importer to do that.
Finally, it should be noted that the plot info works totally separately
from the sample data, and is about what we actually *display*, not about
the sample pressures etc. In the plot info, the "cylinderindex" does in
fact mean the currently active cylinder, and while it is initially set to
match the sensor information from the samples, we then walk the gas change
events and fix it up - and if the active cylinder differs from the sensor
cylinder, we clear the sensor data.
[Dirk Hohndel: this conflicted with some of my recent changes - I think
I merged things correctly...]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes deco handling in Subsurface more compatible with the way
libdivecomputer creates the data. Previously we assumed that having a
stopdepth or stoptime and no ndl meant that we were in deco. But
libdivecomputer supports many dive computers that provide the deco state
of the diver but with no information about the next stop or the time
needed there. In order to be able to model this in Subsurface this adds an
in_deco flag to the samples. This is only stored to the XML file when it
changes so it doesn't add much overhead but will allow us to display some
deco information on dive computers like the Atomic Aquatics Cobalt or many
of the Suuntos (among others).
The commit also removes the old event based deco code that was commented
out already. And fixes the code so that the deco / ndl information is
stored for the very last sample as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They are useful for debugging things in libdivecomputer and this way it's
easier to match the data to specific points in the dive profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this deco could be mistaken as safety stop (in the case where
between two samples we go from a positive ndl to suddenly having a stop -
so we never reach ndl of 0)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When downloading from a dive computer, we fall back on matching the
exact date of the dive if we can't tell whether we already have that
exact dive computer data some other way.
However, if you have multiple dive computers and they are sufficiently
well synchronized, they might actually have the exact same date,
despite the fact that we do want to download both dive computers. We
do check the dive start to the exact second, so this sounds unlikely,
but with dive computers rounding time to the next minute etc, it's not
as unlikely as you'd think. Dirk hit it.
So when we match against date, do check that the dive computer might
actually be one we've already downloaded from. If we have full model
information, we can dismiss the "match date" logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should really be done in libdivecomputer, but that can't happen until
the API there gets extended to support tank sizes. So for now with this
code we manually parse the raw dive data (if downloaded via
libdivecomputer from a Cobalt) and setup the tank size ourselves.
This had relatively limited testing so far.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have a dive computer model and dive ID, use that to match newly
downloaded dives against the existing dives.
Otherwise fall back to "exact date match" again, like we've always done.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Early in the libdivecomputer 0.3 development cycle Jef and I implemented
deco and ndl as events. That wasn't a wise design choice and we agreed to
switch this to be instead new sample types which makes much more sense
(and is much more aligned with the way we are handling them inside
Subsurface). So this commit tracks the change in libdivecomputer. Since
this happened during the development cycle there isn't a way to detect
this at compile time - so you need to make sure you have a matching
version of libdivecomputer when compiling Subsurface.
To make this easier: this commit of Subsurface requires a libdivecomputer
version that includes the libdivecomputer commit d5d44c1e0ffd "Convert
decostop / ndl to samples".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows things to work for dive computers like the OSTC that give us
setpoint information in the sample, but not constant pO2 readings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
