When the message to 'This dive site is being edited' was
being show while the popup to choose the dive site, the
line edit was being covered. now it correctly moves to
the correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unused dead code / hack for the old QCompleter
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you select a dive site with a different uuid than your
current dive.dive_site_uuid, you should get a different
pallete to state clearly that something changed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only set the currType and currUuid if text changed.
This is needed because if you hit key_down it would
set NEW_DIVE_SITE because a keypress on the lineedit was
due.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Start to make this thing usefull: Upon selecting the current index
or writting something on the line edit, we need to set the dive site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Space and tab should select the item in the itemview and hide
it; enter and return also do that automatically.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The line edit wasn't being properly updated regarding its
paint event. Turns out it was because it received a focus
out event and then stopped refreshing the paint.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the view activated signal to send us the index.
Removing debug output that I forgot inside it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keypress management is one of the main functions of the completer, so we
must create an event filter and hook things up properly.
key esq / enter should close the popup (and not leave us with a popup open
and no way to close it - it breaks X)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup should be shown beneath the QLineEdit. this code here
is shamelessy stolen from the QCompleter source code because I
really didn't want to rethink the correct way of doing this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing in the delegate - now it's prettier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I removed the old location edit from the UI, I also need to
remove a bit of code from the UI that was calling it.
fix a few crashes regarding the old location edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the bare minimum skeleton of the new completer for the dive site
management. Nothing works, yet, nothing is hoocked up, yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They are useful to show when trying to figure out what's going on, so just
move them behind a check for verbose.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that I forgot to make sure that the progress bar is shown if
the user has things set up so that the cloud storage is the default dive
file that they open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the authentication check and cloud server availability check which
are different from the one git does. The mechanism for overriding things
is different from there, but this should work just as well.
We intercept the SslErrors signal and if we get the known good hash for
our certificate, we simply call it good.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for a 'struct gasmix' initialization, the 'permille' value
from franction_t should have it's own braces.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Type of the 4th argument is detected as "enum <anonymous> *",
we cast it to (int *) when passed to sscanf().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dealing with cloud storage most of the time the user will not be
familiar with git. So if the local cache is corrupted don't leave them to
clean up the mess. Instead just move things out of the way (just in case
they know how to extract data from the damaged local repository) and ask
them to restart the operation which should give them a fresh copy of their
data from the remote server (minus any local changes that hadn't been
synced to the server before things went bad).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this should be fixed in cmake, for now just manuallt get
libssrfmarblewidget.dll and QtXml.dll in place
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the whole idea of calling these functions through the MainWindow
instance is atrocious, until we change the architecture of all this
refreshProfile() is a useful function to have.
In order to make this cleaner to implement I allowed an argument to
ProfileWidget's replot() which allows picking a specific dive. By
defaulting this to 0 we get the previous behavior when calling replot()
without an argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Inser Bluetooth UI description at end of section dealing with dive download.
2) Delete existing text in appendices that detail pairing a Bluetooth device with
the Subsurface computer.
One image is added to the manual.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces a state check to only continue to try to read/write from
the bluetooth device while its in a sane state.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a read timeout to the qt serial bluetooth code. This is needed
for error handling and error recovery purposes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the dive merging to be much more careful about
things, because it turns out that we had several small oddities that
caused big merge issues.
The oddities are:
- the dive "duration" is actually how long we spend under water.
But that means that when we do "dive->when + dive.duration.seconds"
to calculate the end of the dive, that is nonsensical if you came up
to the surface in the middle of a dive.
Now, normally you don't see profiles like that, but once you start
merging dives together, it can go from "small detail" to "dominant
factor".
- We have two different cases of merging: the automatic "merge new dive
computer download if it looks like the same dive" (which always has a
merge offset of 0, since we merge it as a new dive computer) and the
"merge two different dives into one longer dive.
The code assumed that it could look at the "downloaded" flag for the
dive to check one or the other, but that doesn't really work.
Reading a dive from an XML file isn't any different from downloading
it.
So we need to change the logic to determine what kind of merge it is
to actually check the passed-in time offset.
With this, Stuart Vernon's test-case of eight dives with short surface
intervals in between end up merging correctly into one dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Stuart Vernon <stuartv@force2.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If variables were accidentally carried through from a previous calculated plan,
subsequent plan could be affected. This test aims to detect if this happens.
Commit 8994270 corrected such a bug. If it were reverted, this test would fail
(as it should).
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the option to retrive Marble with pkg-config in a
similar way to Grantlee, libgit2, etc.
It reorganizes the "if(NO_MARBLE)" case to be the "else()" of
if(NOT NO_MARBLE).
Also, it adds the "-r" option to "rm" here:
add_custom_target(link_marble_data ALL COMMAND rm -rf ./marbledata ...
as otherwise it fails on Win32/Msys with "marbledata is a directory".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instructions how to use it are in the script.
As of today this doesn't create working binaries - this worked perfectly
fine back when MXE was still based on Qt5.4
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems this has never worked and nobody ever tested it. There was some
confusion with time zones since Qt takes by default local time when
converting from/to epoch while the exif library used UTC.
For my single test dive, this works now. But this needs more testing!!!
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From DiveList section to printing section
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
