It appears that some misguided compiler / library combinations crash
on &vector[0] for empty vectors. Even though very unfriendly, they are
technically correct, so let's remove these constructs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calling qApp->processEvents() in QMLManager::setNotificationText()
caused crashes, because it could lead to the context-menu that
initialized the call being deleted. Something that QML apparently
doesn't like.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the user switches away from Subsurface-mobile and back while we are
in our initialization phase, that code might run more than once leading
to undesirable results.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The strange enum casts (that apparently we needed in order to have strongly typed
enums in QML) are really ugly and confusing in the code. Since we had this three
times it seemed worth to create a little helper that hides this nonsense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We know that we have valid credentials, so calling openLocalThenRemote()
makes no sense, worse, it doesn't respect the special case of
transitioning between accounts. That's the whole point of having a
separate loadDivesWithValidCredentials() call.
Once we have transitioned state, we need to record the now current state
as the old state so that future transitions will work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The noCloud variable contains our desired state, we need to test for the
previous state for this to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We haven't supported the GPS web service for a long time.
Also, add another message for the log to be able to more easily trace
one error case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we're using the undo stack for determining the whether there are
unsaved changes, we have to mark the undo stack as clean after save.
This duplicates code from desktop. It is planned to unify this in
the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to desktop, also consider the state of the undo-stack when
testing for unsaved changes. This prevents us from missing changes.
This adds duplicate code, which will be unified in the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These appear to be the only cases where we forgot to ensure data is
saved. And pastDiveData is currently not called as the UI to use it has
been removed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code was using the pre-editing dive site name, which appears
weird. Not sure if that was on purpose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager::checkLocation() would only return true if the
dive-site itself was changed, not if the dive-site was set
to a different site.
Thus, in some cases edit events could be lost.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way the launch screen is shown significantly shorter on a device,
and instead the user sees our progress notifications.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have convinced ourselves that only the main thread will ever trigger
a save operation, therefore the locking is not needed (and it has
recently started to cause user problems where local changes aren't saved
to storage and get lost).
Fixes#2718
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of not showing a notification until after we are done loading
the data into our models, tell the user that we are about to do that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simply passes the text to the existing notification text mechanism.
The call to processEvents() ensures that Qt processes the UI events
after we updated the notification and that the user gets timely updates;
otherwise the UI might look like the app is hanging.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the dive site of a dive, the dive-table of the
corresponding dive site was not properly updated by the undo
commands. Try to get this right.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager::changesNeedSaving() behaves differently on iOS:
it only saves locally with saveChangesLocal(), whereas all
other OS save to cloud with saveChangesCloud(). Nevertheless,
even for other OS saveChangesLocal() is called even though
that will be called in saveChancesCloud anyway. Therefore,
compile the saveChangesLocal() call in changesNeedSaving
conditionally.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should deal with the rather confusing 'No dive in dive list' shown
while loading and processing the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the crude and error prone bool, let's just use the right tool
for this job.
In order to avoid issues with a goto across a mutex boundary, this
slightly restructures the code in one place - 'git show -w' makes it
clear that this is really rather simple in its changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm suspicious that an issue that some people have seen around changes
not being saved is caused by our handling of alreadySaving.
When starting with Subsurface-mobile in no-autosync mode, we were able
to end in a scenario where alreadySaving was true, even though there
were no unsaved changes. And in that case no changes made during such a
session were saved unless the user forced a manual sync with the server.
This commit radically changes our approach to handling the flag. It
moves it right next to the actual calls into code that could modify git
storage, and ensures that the flag can never stay set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was disabled in the past because it was deemed to slow. A lot
of time has passed, since. Maybe on current phones / iPads this is
acceptable again?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a context menu entry for top level dives that allows the user
to create a trip for that dive.
Unfortunately this creates a new string to translate right before a
release...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The location information model is updated automatically by the
divelist-model and the undo commands. Therefore remove the
QMLManager::updateSiteList() function. We do have to keep
the locationListChanged() signal though, because the list
of dive sites is not exported via model/view but rather via
a Q_PROPERTY. We really should change that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The git parser loads into the global dive table, even if it
is called indirectly via parse_file(). However, parse_file()
may be given a different table. Fix this by extending the
git parser state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While I remember some of the thinking that went into doing things this way,
the more I read the code, the less it makes sense to me.
This is a rather drastic step, but in reasonably extensive testing it seems
to work in every case that I tried.
That's rather embarrassing, actually.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive on mobile we might have to create a new
dive site. That site is added to the global dive site table
in the undo command. However, the code in QMLManager created
the dive site with create_dive_site*() functions, which already
adds it to the table. The undo command then added the dive
site again leading to a hang of the application.
To solve this problem, create new alloc_dive_site*()
functions that do the same as create_dive_site*()
but do not add it to the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This makes sense because USB devices will only show up when connected,
while BT/BLE will get listed once they are paired, even if not currently
connected. So the higher likelihood of being the device a user is looking
for is for any USB devices that show up, so those should go first.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of relying on the std::vector staying unchanged and not freeing
its members, instead keep a copy of the object in our DCDeviceData class.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tries to download from a device that he hasn't given the app
permission to read from, Android will pop up a dialogue asking for that
permission. With this after giving the permission we continue (well,
technically, restart) the download which is likely the expected behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way even if a USB device wasn't added through an Android intent, we
still have a way to scan for it and select it. This is especially
important in case a user has a cable that we haven't seen yet (i.e. with
a VID/PID that we haven't added to Subsurface-mobile), but that
nevertheless works with the android usb serial drivers.
This also makes the flow a little more logical / consistent when
deciding which connections to show.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally allows us to download from not just the first device, but specifically
the device that the user picks.
Passing the object through a void pointer is not nice - but since this traverses
C code other solutions (like passing an index into the list) seemed even worse.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This vastly simplifies our handling of devive information as we simply use
what is already in the descriptor. This way we do not duplicate information
about USB devices in the QMLManager.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A number of our messages were misleading in the no cloud case. This should help
to reduce confusion.
Adding the save_dives() call after creation of the repo appears to help us have
a valid repo in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The HID devices and the Atomics Aquatics Cobalt cannot work on Android
right now. We should claim to support them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates up to two undo events. This seems like such a small issue that
it's not worth creating yet another undo command for this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this has worked fine for a long time, it now suddenly seems to trigger
crashes. So let's not do that (there are a number of discussions online that
talk about how this could indeed lead to BadThings(tm) happening.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we remove the newest dive from its trip, it becomes inaccessible in the app,
but the dive data saved to disk appears to be correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we are using the existing command infrastructure, this isn't specific to
undoing a delete.
This commit renames the function and removes its use in the UI, the next commit
will then add the generic undo to the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist model is now placed on top of the common
models, we can directly reset the filter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
