This only calls MainWindow::showProfile(), so simply call
that directly.
Moreover make two "public slots" private member functions,
since these were only called locally.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the user undos/redos the profile should update even
when in edit mode. This is a bit more complicated than
anticipated:
1) We should not do the update when emitting an undo command
from the profile. But we *should* update if it is an undo
command from the maintab (change depth/time).
2) The divepointsplannermodel has to be reset. Side note:
the code is truly abysmal as it sends numerous changed-signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It is confusing when undoing a command and nothing happens
in the UI. Therefore, switch to the corresponding dive when
undoing/redoing a replan or profile edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It appears that the QML object that is created when assigning the source
to the StatsView in the ui can be garbage collected and therefore
destroyed and re-instantiated without our knowledge. So instead of
trying to keep a pointer around, we end up looking up the object address
when needed.
We still ask the JS code to not garbage collect the object - but that
clearly isn't enough to prevent it from being destroyed when the parent
widget changes.
Without this fix opening the statistics will crash with Qt6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Qt the forward declaration fails as the export to QML for the statistics requires
the MOC code to be able to determine the sizeof(struct dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A member function had a minute name change.
The SceneGraphBackend is now set via a string argument, not a magic constant.
Thankfully that appears to be backwards compatible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QVectorIterator is only available in Qt6 when you explicitly add the
include files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This no longer compiles when defined in the .ui file. But functionally this
should be the same and it should work on Qt5 and Qt6.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked without that include in Qt5, but having it there doesn't hurt,
either, so instead of yet another conditional compile, let's just include it
everywhere.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the explicit QBluetoothUuid instead of just QUuid and deal with new
constants and signal names.
At least with Qt6 we no longer need the ugly QOverload hack.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStringRef is gone in Qt6 and mostly replaced by QStringView. The one major
difference is that direct comparisons with string literals are no longer
possible.
Thanks to Thiago Macieira for helping me avoid more conditional compilation
here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do want the -Wfloat-conversion warnings where they point out
potential bugs. But they are very distracting when they are triggered by
floating point literals (which the standard defines as double) passed to
a function expecting float arguments.
The fact that Qt6 changes the arguments to all these functions from
double to float is... hard to explain, but it is what it is. With these
changes, for the majority of cases we create inlined helpers that
conditionally compile to do the right thing. And in a handful of other
cases we simply cast to float (and accept that on Qt5 this then gets
cast back to double... for none of these cases the potential loss in
precision makes any difference, anyway - which likely is why the Qt
community made the decision to change the type of the arguments in the
first place).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has bugged me forever. The existing file creates a warning on every single
compiler invocation. I really need to figure out if I can get this fixed
upstream. But while I'm at it, I submitted it here to make it easier to spot
warnings in the build output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These no longer compile with Qt6 - but they are already duplicated in C++ code,
anyway. So we can simply remove them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we are building our own version of libusb, let's build a current one
(because current libmtp relies on that).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was confusing - the file in packaging macos hasn't been used since we
switched to building with cmake something like seven years ago.
Also add missing keys to the actual Info.plist skeleton.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add additional exported values gasO2, gasHe and gasN2 to be available to the
print template.
Also add these to the user manual as well as document some other missing
variables like surge and chill.
Finally, remove references to Grantlee. While the print template still uses the
syntax that we inherited from Grantlee, we aren't actually using Grantlee
anymore.
Reported-by: Rahul Swaminathan <rahul.swaminathan@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding additional exported value meandepth to be available in the print
template language.
A possible use of this would be
<td class="fieldTitle">
<h1> Max / mean depth </h1>
</td>
<td class="fieldData">
<p> {{ dive.depth }} / {{ dive.meandepth }} </p>
</td>
Reported-by: Rahul Swaminathan <rahul.swaminathan@gmail.com>
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the CMAKE_PREFIX_PATH is a multi element path the old code failed
in very predictable ways. So instead simply fall back on the PATH to
find qmake.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons I don't understand, the device pixel ratio was taken into account
twice. And as a result the transformation applied to the profile made us show
only the top left part of it - but enlarged (depending on the DPR).
This code fixes that problem by simply forcing the transformation used by the
painter to be the identity matrix. I worry that this could be wrong in some
situations, but for now it seems to fix the problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can have attachment of fairly arbitrary size (which should
be extremely useful for long libdivecomputer logs). This isn't quite as
intuitive as what we did before - the user needs to pick an email app to
share with), but that doesn't seem too bad - and also... this way they
can share logfiles via Dropbox or analyze them in other apps).
If the file share fails for some reason, we fall back to the old method
with passing the combined logs as body to the support message.
As an implementation detail this keeps the correct path for the app log file around
(this was stupidly overwritten before).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
