This is Henrik's list of common metric sized cylinders, although my
experience differs from this one. In Cyprus, I was diving double 12L
cylinders, but they were 200 bar, not the 232 bar ones Henrik has on the
list.
Also, I really think we should just have a checkbox for "double" instead
of naming them explicitly like this. Henrik does have the 12L 200 bar
ones in his singles list.
But as a stop-gap, I'm just taking the values from Henrik's patch, but
converted to the new cleaned-up reference tank model setup.
Based-on-patch-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes the reference tanks ("struct tank_info") use a saner format
which specifies explicitly whether the size is in ml or cubic feet, and
whether the pressure is in psi or bar.
So instead of having magic rules ("size is in cuft if < 1000, otherwise
mliter"), just set the size explicitly:
{ "11.1 l", .ml = 11100 },
{ "AL80", .cuft = 80, .psi = 3000 },
and then the code can just convert to standard measurements without any
odd rules, and the initialization table becomes self-explanatory too.
This is in preparation for doing the metric tanks with pressure: Henrik
Aronsen sent a really ugly patch using the previous setup, I just
couldn't stand the additional hackery.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henrik Aronsen points out that we've not made it possible to edit the He
percentages for trimix diving. It's easy enough to do, I just didn't
have any dives that needed it myself. So here goes.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Round maximum depth on dive list to get consistent data between the dive
list and dive info.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
O2 per cent from dive computer should be shown in Dive Info if one is
given even without pressure information for the cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the whole UI change (three-paned window and different look with new
colors), let's just make a new release, as Dirk points out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'stars' of git://git.hohndel.org/subsurface:
Fix some issues with star rating code
Add typical 0 to 5 star rating for dives
Still not great editing, but other than that it looks good.
To waste less space in the tree view heading we simply put a star in the
heading instead of "Rating".
We now treat "zero stars" to mean "not rated" and don't store that value
in the XML file.
Rating is no longer a top level tag in the dive entry but instead a
property of the dive tag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Suggested by Henrik Aronsen, and seems much more natural. Especially
with lots of keyboards having function keys oddly mapped.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix ugly printout, give colors proper names, make grid lines and alert
marker easier to see, and specify printer colors independently.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors aren't very pretty, and the grid lines are too thick.
This commit tries to improve that.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
grep for Target doesn't work on non english platforms
-dumpmachine is (hopefully) supposed to always return
the target machine tuple
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'windows-fixes' of git://git.hohndel.org/subsurface:
fix mingw-win32 specific warnings in libdivecomputer.c
Fix mingw-make.sh to find correct xslt-config
Spelling: paragrahps -> paragraphs.
Update the README's example commit message to start with a capital
letter. Capitalize "Java".
Signed-off-by: Joachim Schipper <joachim@joachimschipper.nl>
1) since %lld is not defined in the MSVC runtime, use
the portable PRId64 macro from inttypes.h for 64bit integers
notice in inttypes.h from mingw-win32:
/* 7.8.1 Macros for format specifiers
*
* MS runtime does not yet understand C9x standard "ll"
* length specifier. It appears to treat "ll" as "l".
* The non-standard I64 length specifier causes warning in GCC,
* but understood by MS runtime functions.
*/
2) include unistd.h to disable warning:
warning: implicit declaration of function 'usleep'
Lubomir's code then caused a warning building natively under Linux, which
I fixed as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
* 'windows-fixes' of git://git.hohndel.org/subsurface:
Add more typecasts for Windows`
Fix the Windows preferences support
Update the Windows installer creation script
It doesn't make sense with the new three-pane layout, and I don't think
we're reviving it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is based on an older patch by Lubomir I. Ivanov <neolit123@gmail.com>
which no longer applies due to the refactoring of the registry setting
code.
It takes care of all of the casts between actual C types and the Windows
specific types that the Windows API functions expect. It also adds some
comments to the overloading of "value" in our subsurface_set_conf function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that I can test Windows binaries again, the bugs were rather easy to
spot. Because of the different flow of the opening, writing and closing of
the registry key my first attempt got things wrong - we simply always
create the key with all access rights; if it exists Windows will just open
it for us. The second bug was a cut'n'paste error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now works with a straight out of the box MinGW install on OpenSUSE.
A simple shell script that shows how to invoke the cross build is
included.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should make the Makefile much more robust when cross compiling.
The windows.c code is now compile tested but not functionally tested.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We assume every sample with a depth of less than 10cm to be on the
surface.
This does not impact our interpolated pressures (one could assume that the
diver is not breathing from the regulator when on the surface - but
without air integration that's just an assumption).
It also doesn't change our tank pressure coloring by sac rate as that
always uses the momentary sac rate. Technically speaking this might impact
the actual colors printed (as those are relative to the total sac on the
dive which may go up due to this change).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is tested with Linus' sample data, all basic functionality seems to
be working properly. Gas changes are implemented but not tested as there
was no samples of those. Multiple cylinders are missing because there
was no samples available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Have information of multiple XSLT files on an array for importing
"alien" formatted XML dive log files. Adding support for new XSLT
requires updating the array and adding the XSLT file (provided the
format can be identified by root element of the XML).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* multi-pane:
Experimental hard-coded three-pane layout
Ok, so it's not perfect, but I've been using a version of this for the
last week or so by now, and every time I go back to the old layout I
just cringe.
So the three-pane window approach requires much more display area, and
probably wouldn't work wonderfully on low-resolution devices (ie 720x480
or even 1024x600). So for anybody doing a cellphone port, you may need
to play around with the interface. But this should be usable even on a
netbook, although not as good as on a device with more pixels.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We do all the pressures in mbar, which has plenty of precision for
interpolated pressures - even when we then do our discrete integration
over many samples.
However, when we calculate those interpolated pressure points, we should
make sure that we round the result correctly, otherwise the consistent
rounding errors (from truncating the FP value into our integer mbar
values) will result in a final pressure that is noticeably off in ugly
ways (ie "end pressure set by hand to 750 mbar, but shown as 748").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit abdee5b1b8.
There's no point in doing random hacks. Instead, do the intermediate
pressure calculations with proper rounding instead of always truncating
to mbar. With the math done correctly we have enough precision that the
end result of the pressure interpolation doesn't have the kind of errors
that caused Dirk to try to fix things up later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was getting the following error:
dive.h:8:25: fatal error: libxml/tree.h: No such file or directory
compilation terminated.
So I updated the Makefile to fix that error and follow the standard in
the file.
Signed-off-by: Terrance Stanfield <t@hollowcranium.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm not happy with it, but it looks good and works better than the
alternatives I've looked at so far.
So why not happy? It's not configurable, and gtk really doesn't do a
great job with the case of notebook widgets that are shrunk to be
smaller than the contents (the cut-off gets ugly, and is outside the
notebook page!)
But committing as a way to keep track of this, and let Dirk use it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While printing the last pressure in the calculated sequence may seem more
logical, given that the discrete series will create some amount of error
this simply looks wrong. Instead we pick the end pressure that was
manually set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
