This fixes a copy-paste error made by me that caused
tempSensorOffset to first be set the wrong way and then overridden by
pressureSensorOffset.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a few uneeded lines and add more loading code for
the preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes all the cases that I didn't checked for
the default prefs.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those macros are nice because they take into consideration
the default preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date loading was incorrect, this unittest + fix deals with that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculate gfline using the gradient factor that is set by the planner
preferences when in the planner, and by the general prefs when not in the
planner. This is achieved by doing the gradient factor calculation in dive.c,
where buehlmann_config is defined.
Previously, the gfline was calculated using the general preferences gfhigh and
gflow, even when in the planner.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a couple of issues with the tests.
Also, a type in prefs.h is "short" while it's actually
a boolean, this made me write the wrong testcase for this.
Fixed this by setting the Qt wrapper to bool, but I didn't
changed the c implementation because I tought I could break
something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, this will skip the gas change event if both dives
use same gas.
Fixes#1099
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... as those are needed for the heatmap and not only
for Buehlmann ceilings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While Linux can set the locale from the language text, Windows needs the
correct locale value (which makes more sense to use, anyway - that's why
we save it).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus pointed out that it might be another call site (and looking at his
proposed patch I noticed a logic error in my earlier attempt)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a simple cp2130 userspace driver. Its probably unusable in the
real world but its a great base to build upon.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The set_halfduplex function takes a unsigned int, not a int.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewrites the custom serial code to use the new api which I
implemented in the Subsurface-branch of libdivecomputer.
This is a bit to big patch but I haven't had the time to break it down
into more sensible patches.
This rewrite enables us to support more ftdi based divecomputer
communication and is tested with both a OSTC3, OSTC2N and a Suunto
Vyper, all over the libftdi driver.
The bluetooth code paths are tested to, and should work as before.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing adive in Subsurface-mobile we can only handle one buddy
due to the limitations of the combobox. To prevent loss of data when editing
a dive with more than one buddy we display "Multiple Buddies" in the buddy
field. This creates a special case where no changes are written to the buddy field
unless the user changes buddy for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... and not just for Buehlmann. This makes the saturation
graphs meaningful for VPM-B.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change runtime table string from ZHL-16B to ZHL-16C to reflect he fact
that we use 5min as half-time for the fastest compartment rather than
4min.
Further more trade pow(2.0, ...) for exp().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes 'fixup_dc_cylinder_index()', which was added to fix up the
pressure sensor indexes from the Atomic Cobalt dive computer.
Even for the Cobalt it really shouldn't matter, because the
libdivecomputer backend for the Cobalt actually tries to do the right
thing. See for example commit 8853a1ccd422 ("Associate the pressure
samples with the primary tank.") in libdivecomputer.
Some historical digging shows that the subsurface sample pressure index
code came in from commit e32ba4d6d8 ("Improve tank handling for
Cobalt"), dated Tue Oct 28 13:48:15 2014.
And the libdivecomputer "use the right cylinder" code was around the
same time (Fri Oct 10 20:29:17 2014 +0200).
So I suspect that subsurface needed the fixup based on an older version
of libdivecomputer. Jef's patch is a couple of weeks before, but we may
not have tracked libdivecomputer religiously.
The reason to remove this code is because it can (and does) mess up the
sensor index when it is actually reliable, like in the multi-sensor case
of the Suunto EON Steel.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the recent setting cleanup, gradient factors were set to bool, so were
saved as 1/1, rather than say 50/80. This commit fixes that.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No, they don't make sense. We should normally not have multiple samples
that are on the same second. But they seem to happen on the EON Steel
under some circumstances, and instead of dividing by zero when trying to
interpolate across such a sample, do something sane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
