This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Not strictly necessary, but more idiomatic C++ and less
polution of the global namespace. This one is so trivial
that there seems to be no reason not to do it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a rather long commit, because it refactors lots of the event
code from pointer to value semantics: pointers to entries in an
std::vector<> are not stable, so better use indexes.
To step through the event-list at diven time stamps, add *_loop classes,
which encapsulate state that had to be manually handled before by
the caller. I'm not happy about the interface, but it tries to
mirror the one we had before.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
Remove those that are commented out, since this part of the code
will not be ported to QtQuick. So why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printf() is a horrible interface as it does no type checking.
Let's at least use the compiler to check format strings and
arguments. This obviously doesn't work for translated strings
and using report_error on translated strings is dubious. But OK.
Had to convert a number of report_error() calls to supress
warnings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the "hide event" status is lost when switching dives.
Save it in the event struct instead to make it persistent.
In the future we might save this information to the log file.
Then this should be integrated in the undo-system.
This commit also makes the "unhide events" menu entry more
fine grained: It now differentiates between individual
events and event types.
Note this adds an additional field to the event structure.
There is a "deleted" field that is used internally for
book-keeping, but probably should be removed. Not touching
this at the moment as long as this is C-only code. When/if
switching to C++ we can make the event linked list a table,
which will make this much simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing name / flag pairs to event_type functions,
pass a pointer to the event. This hides implementation details.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This structure is used to hide events of a certain type.
The type was inferred from its name, but now includes flags.
So event_type is more appropriate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Reinstate the hiding of events by event type across
all dives in the log. This was unintentionally removed in #3948.
Also change the event type to be specific to name and severity, and fix
bug causing 'Unhide all events' to not show when only individual events
were hidden.
This still leaves the inconsistency that hiding of similar events is
persisted across the switch between dives, but hiding of individual
events is lost when switching dives, which is mildly confusing.
Follow-up to #4092.
Signed-off-by: Michael Keller <github@ike.ch>
This does two independent things:
It sets the planner state early enough so the appropriate
default profile for the planner is created (without
safety stop).
Upon cancelling the planner, it resets the profile widget
to profile more (rather than planner) as otherwise upon
the next change into the planner the planner model is
not properly initialized.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When events are hidden in the profile, only hide events with the same
name and the same severity (flags).
From discussion in https://github.com/subsurface/libdc/pull/54.
Signed-off-by: Michael Keller <github@ike.ch>
Add a button that allows the user to hide the infobox with statistics
about the point in the dive under the mouse cursor in order to be able
to see the full dive profile unobstructed.
Signed-off-by: Michael Keller <github@ike.ch>
With Qt-containers, this might be a small pessimization, because
it might lead to a deep copy. This can be "fixed" by
for (const Type &item: qAsConst(container))
But frankly, I don't care. Ultimately it is probably best to
replace the Qt containers by standard containers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The eventname handling code was splattered all over the place.
Collect it in a single source file and use C++ idioms to avoid
nasty memory management. Provide a C-only interface, however.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The moveInVector() function was defined in qthelper.h, even
though it has nothing to do with Qt. Therefore, move it into
its own header.
Morover, since it is a very low-level function, use snake_case.
And rename it to move_in_range(), because it does not only
work on vectors, but any range with random-access iterators.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile replots if the mode of the currently displayed
dive changed. To do so, it compares the changed dive to
the displayed_dive. However, that is only used for planned
dives since quite some time.
Fix the check and make the replotting work again.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When zoomed in, the profile position was moved by hovering with
the mouse. What a horrible user experience. This is especially
useless if we want to implement an interactive profile on mobile.
Instead, let the user start the panning with a mouse click. The
code is somewhat nasty, because the position is given as a
real in the [0,1] range, which represents all possible positions
from completely to the left to completely to the right.
This commit also removes the restriction that the planner handles
can only be moved when fully zoomed out. It is not completely
clear what the implications are. Let's see.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile knows which divecomputer it is plotting. No point
in accessing a global variable (which isn't even defined on
mobile).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From a user's perspective, the edit mode is not a different
application mode anymore. Therefore, don't change the background
of the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit mode was hidden in a context-menu. With fine-grained
undo there seems to be no need to explicitly exit edit mode.
Therefore, always switch to edit mode when displaying a
manually added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in the planner, ESC should cancel the plan.
However, when the user manipulates the dive-handles in the
profile and presses ESC, first nothing happens, then an obscure
message appears.
The reason is that ESC "shortcuts" are introduced in two places.
To fix this, remove the ESC shortcut in the profile (the planner
widget cancels the plan anyway) and replace all the shortcuts in
the profile with a simple override of the keyPressEvent().
The latter is not strictly necessary, but hopefully avoids further
complications with multiple shortcuts. And the code is easier
to follow too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In planner and edit mode, the cursor position is indicated using
crosshairs. They broke when changing to absolute scaling.
To fix them, remember the plot-area in the profile scene and
draw the crosshairs only inside this area (not on top of axes).
However, limit the position of the horizontal line to the
actual profile (dont paint inside the partial pressure, etc
graphs). The vertical line is painted above those graphs, so
that a timestamp can be related to partial pressure, tissue
loading, etc.
Also, set the z-value of the crosshairs. It was painted
inconsistently above some and below other chart features.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All data access is now directly via the plot_info structure
owned by the ProfileScene itself.
Also removes DivePercentageItem::hColumn, which was an
artifact from the DivePlotDataModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was logic to disable animation when switching from "no dive"
to "show dive". However, that has bit-rotted away: the plotted
dive was set before plotting the dive and therefore the check
for "change from empty" did not work. Introduce an explicit
empty flag instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to check wether a screen-point
is located on the profile. Bizzarely, this was done by
transforming into local coordinates and checking
min/max value. Simply check the screen coordinates
directly. Moreover, make the function return whether
the point is inside the region, not outside the region,
to make logic more straight forward.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Hide thumbnails, which are out of the shown range. This became
necessary when converting to absolute scaling.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing from relative to absolute scaling of the char
elements, positioning of the picture thumbnails was broken.
To emulate the old behavior, add a function to DiveCartesianAxis,
that allows positioning with respect to the axis on the screen.
To simplify tuning of the poctuire positions, name a few
constants explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The picture thumbnails were recreated on every profile render,
even when zooming / scrolling. In that case, we should only change
the positions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a potentially expensive operation (e.g. interpolation of
pressure values), so don't recalculate the plot data for every
redraw.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Positional bool parameters to control the rendering of the plot
have been a pain. We are down to one parameter (instant),
but more will be readded, so let's use the opportunity to
control rendering with a flags parameter.
Sadly, C++ has no reasonable way of defining flags that I know
of. Either the identifiers leak (enum), or can't be trivially
ORed (enum class) or are weakly typed (int). Let's just use an
integer for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We were using the QGraphicsScene machinery to zoom into the
plot. This not only zoomed into the dive, but into the whole
thing. In general, one couldn't see the axes anymore.
Instead, adjust the range of the time-axis according to the
zoom-level and position.
Of course, the code isn't adapted to that and the result
is comical. The chart features will have to be fixed
one-by-one. Oh joy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the zoomLevel is reset for every plotDive() call,
because the zooming is done via the QGraphicsScene. However,
this does not work well (e.g. axes are likewise zoomed) and
in the future a change of the zoom level will cause a replot.
Thus, remove the zoom-reset in plotDive() and do it explicitly
when switching dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a constant, no point in keeping it as a member variable.
Contains removal of a pointless #ifdef (guarding against mobile,
but code not compiled on mobile), a typo-fix in a comment and
replacement of Qt's idiosyncratic qreal by double.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
