This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decrease depth by tapping left part of widget. Icon is showing "up" (i.e. closer to surface).
Increase depth by tapping right part of widget. Icon is showing "down" (i.e. deeper).
Fixes#354
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Move variable members construction to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList is optimized for storing pointer-sized items, thus
a QVector is the better choice for everything else.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for dereferencing a null pointer from me was a bad fix that
broke the possibility of saving a planned dive as a dive.
This is a better fix to not dereference a null pointer and be able to
save the plan again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that the minimum time / depth is
correctly set on the profile planner.
Fixes: #358
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If rowCount() is 0 we get an assert:
ASSERT: "last >= first" in file kernel/qabstractitemmodel.cpp...
To solve that we wrap the beginRemoveRows() call in a bnrach:
if (rowCount() > 0) {
...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize diveplan.dp to NULL, so we know that we will bail in
drawProfile, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize stagingDive to NULL, so we know that we will bail in
createTemporaryPlan, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When got auto-rescaling of the depth scale, always reset the depth scale
to what the profile would suggest. This introduces a concept of user
requested minimum witch we will update and not scale down to lower than.
Reported-by: Henrik Brautaset Aronsen <henrik@synth.no>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we start to define a gas, we should use that one by default instead
of air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It previously always started with o2 in air, now we start with 0 as its
the same default as in the cylinders too, which fixes a uninitialized
index there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the scale is too big or too small, adapt the scale automatically.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to add the last sample - the dive plan functions want to
figure out the path to the surface by themselves and get confused by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hacky and simply adds the title to the message text when
compiling on a Mac, but hopefully this will be enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better handle the mouse movements on the add dive profile,
when outside of the canvas boundaries. It had bugged me for
quite a while, but this is so much better.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables gas selection through in the add dive profile.
Good thing ( and I really didn't think of that before ) is that
it is less than half of the code of the other implementation.
:D
Fixes#265
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't take into account that last == first when checking for
the first item on the list. Now the gas is correctly placed on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit removes obsolete code, there was a
gaslist selection when user clicked on the buttons, but
this shouldn't be anymore, since the next commit will
add a menu to select the gas for that particular point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is about the right size, but the scaling pixelates the icons. So this
is not really a fix, just a hack.
See #269
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the order of the increase / decrease depth button on the planner
since 'bottom' means increase depth and 'top' means decrease. Sorry
I'm too undiver currently :)
See #269
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch is a crude attempt to 'anchor' the bottom of the Dive
ruler editor ( the new graphics ) to the bottom of the scene.
since QGraphicsView doesn't have a good way to modify the origin
point of an item, I'v just shifted all other items up a bit, this
way the 0,0 point is in the bottom of the drawing and I can safely
move it around, making it bottom-anchorable. :D
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This flag is added to all items on the parent, so there's no need
to implement this on all of them.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- get_gas_from_events does NOT always set o2/he. It only updates them IFF
a matching event is found; so we need to make sure we start out with a
valid gas mix
- the way we tried to restore the edited dive in case of an edit to a
manually added that is cancelled was completely bogus. Way too complex
when we can simply and reliably simply store the dive and then copy it
back
Fixes#270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When cancelling the edit of a manually added dive, we should send the
sample with timestamp 0 to addStop - that's a magic value and causes us to
add a node at 5m/15ft and 10 minutes instead. Since the dive always starts
at the surface, calling addStop is redundant, anyway, so let's just not do
that.
See #270
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the ugly icons on the visual profile editor and replaced them with
the much better looking ones that Luisa designed. This was not a simple
search and replace since Luisa's design was a bit more sophisticated.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To our addStop method time = 0 & depth = 0 are a magic flag. And since we
always start at the surface, that is assumed, anyway. So let's just not
add a stop for that when re-creating a plan from a dive.
Fixes#254
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit enables a context menu to remove dive handlers,
because it was hard to find that ctrl+click selected it,
then a delete button press removed it. it's better now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0f50b73f9e ("Fix planner / add dive handling of DiveHandler
Points") some issues were introduced. While it is fine to remove the
artificial first point at the surface, the commit broke the special
handling for o2 == -1, i.e., the usual case where a default gas needs to
be picked.
This generalizes the algorithm previously used to also look to the right,
now that we are no longer guaranteed that there is a first point to our
left.
This also cleans up some whitespace damage introduced in the same commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk, is this really necessary or it's just something that you forgot
to remove? this is adding a bit of pain to fix some issues on the planner,
so I'm commenting this out untill you have a bit of time to look at it.
It looks like this was added to handle the gas in the pos-1, but you reverted
if so, this completely reverts it, and things works as expected again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the first DiveNode at 5m / 10 minutes when clicking on the plus
button on the DiveNotes Table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somewhere we broke this, most probably in the code that activated the
planner to be used together as an 'add dive'. This commit makes the code
workable again.
There's one thing, though. if the model is empty, this will add something
in the first point - it's behaving strangely. I'll try to fix this in a
way that's invisible to the user, but overall, why are we inserting
something in the first(0,0) time and depth?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch closes the air list when clicing outside of it,
making the use of the planner more pleasant.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can wire qt to call the right functions directly, so we don't need
these members.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This failed spectacularly when I first tried it, so I put it on the back
burner. And it appears that with all my recent fixes for "add dive" as a
side effect this is working, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed this one spot when converting back to the different semantics for
divedatapoints.
With this change add dive appears to work correctly (fingers crossed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise adding a second cylinder (to the default one cylinder of air)
and subsequently changing the gas of that cylinder will illogically change
the gas used in all the segments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the gases for which we have cylinders are offered in the gas selection
list and correctly recognized and added for the plan.
Still tons of work to be done to make this work the way it is designed,
but we are getting closer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in preparation of using those to define the gases available for
planning.
Right now this doesn't seem to work quite right - I don't get the
auto-completions for the cylinders that I was hoping for...
This commit also corrects the tooltip for addint dive data points.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Insert the dive data point at 0,0 manually at the beginning of the plan.
Now everything should work. We still can't edit a plan created like this,
but at least we can once again plan things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Garbage was left behind when canceling edit dive, and thus when the user
set his dive to be editted, after a first canceled edition, all points of
the first edition got messed up and showing on the second dive too. if the
user clicked 'ok', he got a really bad surprise.
Fixes#226
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The code had quite a few odd special cases that may have been left-overs
from the old Gtk algorithm. With this the gas is actually in the dive plan
node where it's use starts. And we maintain the gas correctly between
multiple edit sessions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of rounding issues we need to use our macro to test for air
(especially since the events store gas percentages and not gas permille).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables undo for the edit mode on added dives, it uses the
premade backup to fill the old dive with data. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Changed the backup implementation of the samples on EditDive,
it's way cleaner now what's happening, and it's also better for
the cancel edit.
Next: The Cancel Edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
The dive planner always showed the depth in our internal units, ie
millimeter, in the sidebar that showed the plan points.
That made little sense in metric mode, and none at all in imperial. The
_graph_ showed things in meter and feet.
So make the DivePlannerPointsModel always convert things to and from the
user units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
We don't use any of the Standard Library features or classes in
Subsurface, except for three uses of std::sort, for which I added the
necessary #include.
It's always a good idea to include directly the headers you want,
without relying on indirect inclusion
On my machine, the build time dropped from 16.96s to 13.38s or a 12%
improvement.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we don't have to new/delete them, which is a waste of
overhead.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This means we can also remove the forward declarations.
This is the first step in removing the memory allocation for the ui
sub-classes. Without the second step, this commit is just making the
compilation time increase for no good reason :-)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This was not as hard as I assumed it would be. I may still change the
horizontal dimension to be the more logical seconds instead of minutes,
but for now this achieves the main goal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I always disliked the fact that when you moved the handlers around you
could just 'run over' the neighbors. This also (as a somewhat intended
side effect) prevents vertical descents and ascents).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm sure there are more issues like this where we need to handle things
differently depending on whether we are planning a dive or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add two more rows to the widget - this is getting quite busy.
There still is some weirdness where the focus isn't returned where it
should be and a few other details, but overall getting there.
Added helper functions to parse a temperature and to deal with the
timezone offset - with that latter one I also fixed the time offset bug in
the planner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is much friendlier than just showing an empty profile. I picked a
nice and simple three level dive. 25 minutes at 18m, 15 minutes at 9m, and
a safety stop.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets things mostly right.
It creates a dive and uses the planner widget to create samples which are
copied into the dive. It fills in some reasonable defaults (DC model,
timestamp), but doesn't allow editing the timestamp (or the temperatures
and air pressure).
On accept the planner gets reset and the dive appears correctly in the
dive list.
Cancel still needs to be handled.
And I bet there are many subtle bugs lurking here and there. But it's a
start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the planner update its display continuously upon moving points
including deco. This appears fast enough on typical PCs. If this ends up
being to slow on some systems we may have to make it configurable.
[Dirk Hohndel: cleaned up the two patches and turned into one commit]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks like it might work, but since we keep recreating the dive, the
info entered in the info pane is actually lost. But it's a step in the
right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In add dive mode simply bring the diver safely back to the surface
(currently with a fixed ascent rate of 30ft/min (or 9m/min)).
We should make that rate configurable (for the planner as well as the dive
add function). Also, the dive add function should offer to automatically
include a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is just calling the same code and setting a flag whether we
are planning or adding a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This almost fixes it, but the offset from UTC isn't calculated correctly
it seems. Committing and hoping that a Qt expert can help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plotted the Scale on the Ruler in the planner.
There's a tiny bit issue - mostly noticiable while resizing,
but it's not a killer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Planner should be 'almost' like the profile, with the possibility
to use the mouse and keyboard to input a new plan, so this is a bit
of 'getting there.' I don't like too much code duplication but since
the current Profile Graphics is a crude cut-and-paste from the old
Cairo backend, it's easyer to start from scratch and have it well
organized as Qt code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ok on the planner now correctly creates a dive,
a few remarks, tougth:
1 - the number of the added dive is always 0
( but I may be testing it wrong )
2 - the information pane is working only when
the mouse is clicked, this is a regression and
it will be fixed. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The dive plan was bein created on the Profile, this
While this worked out, it created a bit of spaggethi
code, so now the model will take control of *everything*
on the planner.
I tested it quite a bit and doesn't seems to have appeared
a regression, wich is good.
Now that a dive plan is bein created, I can just save it. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug the cancel action on the dive planner ( before that, only by
hitting the 'ESC' button things worked, so now you can also click
on the Cancel box that's on the right of the planner profile window.
Also, the beginning of the 'ok' code is also at place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Position the X and Y labels of the rulers, this way
it's a bit more clear the deepness and the length
of the trip. It's still not the best approach, but
I'm getting close.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Clicking on the plus button now adds a new stop on the planner.
The depth is always 10m and the time is 10 minutes after the
last stop. can be changed by double clicking or dragging the
balls around the canvas.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signal that the model changed when editing plan specific information,
when you changes the ATM pressure or any other information, the
graphic of the plan will be generated again to mirror your actual dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plug most of the dive planner controls that weren't
plugged yet - StartTime, ATMPressure, BottomSAC,
DecoStopSAC, LowGF and highGF are being used by
the calculations now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Enabled the CC SetPoint settings on the table, changing
it will automatically reflect the canvas. Also fixed a bug
that prevented the 'Air' handling on the diveplanner
table to show the list of options using arrow up and down.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Fixed a incorrect signal-connection call that should'nt
be there anymore because the TableView now correctly
knows what to do with models.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The code now seems to be mostly working. There is unfortunately
a QAction shortcut conflict between the implementation and the
MainWindow. - I'm gonna fix that in the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The plus sign for time was in a very strange position,
this puts it back to where it belongs, plus a bit of
code cleanup since the planner was in heavily modifications,
this will be needed quite a bit. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now the planner deletes points by clicking on the
trash icon on the table. The dive planner is almost
finished. <3
next: add a point from the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Deletes the logic of divepoints to the model, this
makes automatic updates on the table on deletions.
( remember, to select dive points, ctrl+click on it.
) if you want to delete it, press 'delete', it will
be removed from the graphics part and also from the
table.
Next: delete point by clicking on the table trash-
icon.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The gas choice now works and correctly ( I hope ) calculates
the gas choosen to show on the planner. User can choose the
gas from the list on the visual planner, and also on the table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added support for changing depth and time on the table.
It now works both ways, one can edit the planner via the
table for a fine tuning. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit is the start of the Editable Model work
for the planner, it creates a new delegate and shares
the code for the model that creates the gas types, so
we only need to change in one place to add new gases.
The table is already edition-enabled, but the outcome
is still undone, next commit - put all together.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the tableviews share a bit of code, and code cleanup.
The tableviews for Cylinders, Weigth and Dive Planner Points
now shares the CSS and I also implemented the save / load
methods for the dive planner points, so the functionality
is mostly done on the vieualization side. - since we are
now using three tables maybe it's a better idea to create
one class SubSurfaceTable that knows how to handle saving
/ loading of the columns... TODO for the future. ;)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>