In 2e230da361 the dive-selection signals
were unified. Sadly, this was done in a suboptimal way resulting in
numerous calls to updateDiveInfo(), which refreshes the main-tab.
Firstly, the MainWindow connected to selection changes from both,
the undo-command and the divelist. Secondly, every selected dive
in the divelist caused a single signal.
Thus, connect only to the divelist (this is necessary for user-initiated
selection changes) and only send a single signal in the divelist
per selection-reset.
This is still less than perfect as updateDiveInfo() is called even
if the current dive doesn't change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of calling into the planner, simply create the dive computer
information right there, using the existing helper function we have to
create simple profiles.
Fixes#2128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way the application state would enable/disable widgets was very
"dynamic". A property-list would be generated and put in a set
of arrays. Very hard to figure out what is going on.
Replace these property-list by flags and explicit old-fashioned boolean
expressions.
Join the two arrays (widget- and property-lists) into an array of
a unified data structure.
Replace the macro that sets the widgets by a simple static function.
Factor out the four loops that added widgets to the quadrants into
a simple static function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the dive table and extract dive sites,
loop over the dive site table.
This makes it possible to show dive sites that have no dive
associated with them.
But we have to create to functions that check whether a dive
site has any shown dives or has any selected dives.
Moreover, change the code to add near dive sites of the same
name if in edit mode. Other wise (erroneously added?) dive
sites with the same name cannot be moved on the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
- Remove updateInfo() function as it does the same as update().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller of said function used to check whether MainTab is
in edit mode. For this case there is already a function - use that
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Apparently, in some Qt-versions the destructor of the base class
calls hide on child-objects (according to Qt's object hierarchy).
This is obviously called after the derived class has been destructed.
In a concrete case, the base class of the destructed MainWindow
would hide the TabDiveSite object. That would reset the filtering
if a dive site was selected, which would indirectly access the
MainWindow, which is already partially destroyed.
Therefore, destroy the MainTab before destroying the MainWindow.
Do this by keeping it as a std::unique_ptr subobject. Thus, it
will be destroyed before the MainWindow and remove itself from
Qt's object hierarchy.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The model was not reset on file close, leading to weird effects.
New dive sites would be added at the end of a table full of empty
entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of a dive field is only performed when focus
is removed from the field. On pressing CTRL-s, the changes
in the currently active field were therefore not saved.
Remove the focus from all fields to trigger an edit command
yand thus ensure that all changes are saved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole edit logic moved from displayed_dive to current_dive
and it became more and more tedious to keep these in sync.
Therefore, simply always display current_dive. The only exceptions
are the equipment tab and the planner, as these are not yet
integrated in the undo system. Once this is done, displayed_dive
can be removed.
Moreover, remove the clear parameter from updateDiveInfo().
Instead simply clear of there is no current_dive set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of letting the user edit the fields before adding a dive,
simply add an empty dive. Thus, the ADD mode of the main tab can
be removed.
Constructing a new dive with default-depth and making sure that
the dive is displayed correctly is very subtle. This all needs
to be detangled in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove a few cases of
void fun() {
...
}
While touching these functions, fix a few other whitespace
coding style violations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions are now performed by the edit commands and the
macros have no users. Remove them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit dive site button was connected to a *signal* of MainWindow,
which was connected to a slot of MainWindow. Remove the unnecessary
intermediate signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an edit column that calls the new editDiveSite() function
of MainWindow. The calling code is in DiveSiteSortedModel.
Quite illogical, but that's how TableView works, for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signal was caught by the MainWindow to:
1) call setDefaultState()
2) call refreshDisplay()
3) call refreshDisplayedDiveSite()
1) Let's call that directly from the widget. The reason is that in
the future there might be multiple way to get into the widget and
therefore the widget needs finer control.
2) Remove this call as it produces an unsteady UI.
3) This should be done by undo commands, not only when finishing
dive site editing.
Thus, the signal becomes unnecessary and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the filter widget itself to show the information how many
dives are displayed, put it in the window title where it's visible even if the
filter widget isn't shown.
If the filter is not active, simply show the total number of dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In commit b0556abdd35f96b816ba11e40bf5707abe0c3ebf, the filter-widget
and the filter were connected by a direct function call. This led
to a rather obscure crash on application-close with Qt 5.12. The
crash is due to the Ui::MainWindow class being a sub-object of MainWindow,
but the FilterWidget2 being *not* a subobject.
What happens is that after calling the MainWindow destructor, the
subobjects are destructed, notably the Ui class. Then the base-class
destructor is called (which makes sense, as destructors are called
in reverse order of constructors).
But: the QObject destructor calls hide() on all still existing child-objects
according to Qt's object hierarchy, notably the visible FilterWidget2.
Now the FilterWidget2, on hiding, updates the MainWindow, which has already
destructed all its subobjects. Crash.
Prevent this crash by making FilterWidget2 a subobject of MainWindow
and thus have it destructed before running the QObject destructor.
Alternative ways would be:
1) Use signal/slot() instead of function calls, as these are automatically
removed if an object is destroyed.
2) Make the FilterWidget2 subobject a smart-pointer. Thus, we probably
wouldn't have to include the corresponding header.
3) Make the FilterWidget2 subobject a plain pointer and delete it
explicitly in the constructor.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This adds a checkbox for rebreather modes of the planner
that force the ascent to be in OC mode. Before, one had
to add a one minute last segment with the mode change but
this is not practical when manually searching for the
maximal bottom time given gas reserves.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModel was used to represent both, trip and list views.
Thus many functions had conditionals checking for the current mode
and both modes had to be represented by the same data structure.
Instead, split the model in two and derive them from a base class,
which implements common functions and defines an interface.
The model can be switched by a call to resetModel(), which invalidates
any pointer obtained by instance(). This is quite surprising
behavior. To handle it, straighten out the control flow:
DiveListView --> MultiFilterSortModel --> DiveTripModelBase
Before, DiveListView accessed DiveTripModelBase directly.
A goal of this commit is to enable usage of the same model by mobile
and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Register the new FilterDive widget on the mainwindow
so we can trigger a shortcut to display it.
The shortcut currently doesn't exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The whole point of the undo-command system is that the divelist
doesn't have to be refreshed. Therefore, don't do it for autogrouping
/ deautogrouping.
Moreover, the divelist-changed flag is also set by the command and
doesn't have to be set explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code always sorted by "ascending" by default. But
because users typically want their new dives top, "ascending"
was defined for NR and DATE, such that it is actually descending.
Turn these around and intitialize these two fields as
default-descending.
This is possible using the Qt::InitialSortOrderRole role
in DiveTripModel::headerData().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView code had a very fundamental problem with its
header: Each had its own idea of who is responsible for sorting.
Since we can't easily change QHeaderView, accept QHeaderView
as the authority on sort-column and order.
To make this possible, split the reload() function in two
distinct functions:
- reload() reloads the model and sorts according to the
current sort criterion.
- setSortOrder() tells the header to display a certain
sort criterion. If this is a new criterion, it will then
emit a signal. In this signal, resort according to that
criterion.
Thus, the actual sorting code has to be moved from the
headerClicked() to a new sortIndicatorChanged() slot.
Morover, the sorting of the QHeaderView has to be used.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Does not solve any problem, but might help users that are confused
about the next/prev DC menu items, to select a different profile
for the currently selected dive. So, enable these menu items only
for dives where more than one DC is used.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Comits f427226b3b and 43c3885249 of the undo series introduced 2 calls
of autogroup_dives() without checking the autogroup global boolean.
This is a bug. An import from DC (for example) then triggers an
autogrouping, the divelist is autogrouped, and the UI button
is off.
This commit solves this. I've chosen for a guard in the autogroup_dives()
that now is a no-op when called when the user did not select autogrouping.
In additon, simplified the other calls to this function, as we do
not need to check before calling any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Instead of the weirdly named "information" and the inconsistent
"dive_list" use the logical "mainTab" and the camel-cased
"diveList", respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The global object "displayed_dive_site" is used to store the
old dive site data for the edit-dive-site widget. The fields
of the widget were initialized from this object in the show
event. Therefore the object was updated in numerous parts of
the code to make sure that it was up-to-date. Instead, move
the initialization of the object to the function that also
initiatlizes the fields. Call this function explicitly before
showing the widget.
This makes the data-fow distinctly easier to understand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fetching the taxonomy from GPS coordinates was implemented in
a QThread. But the only access to the main function was a
direct call to run(). Thus, the thread was *never* started.
The function call was always asynchronous [it was using an
event loop though, so the UI doesn't hang]. Notably this
means that the signals connected to the thread would never
fire. And the spinner would never be activated.
Thus:
1) Turn the thread into a simple function.
2) Remove the spinner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Planned dives were still added by directly calling core code.
This could confuse the undo-machinery, leading to crashes.
Instead, use the proper undo-command. The problem is that as
opposed to the other AddDive-commands, planned dives may
belong to a trip. Thus, the interface to the AddDive command
was changed to respect the divetrip field. Make sure that
the other callers reset that field (actually, it should never
be set). Add a comment describing the perhaps surprising
interface (the passed-in dive, usually displayed dive, is
reset).
Moreover, a dive cloned in the planner is not assigned a
new number. Thus, add an argument to the AddDive-command,
which expresses whether a new number should be generated
for the to-be-added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The command-objects select a current item, but this selection
was not propagated to the front-end. The current item is the
base for keyboard-navigation through the dive-list and therefore
should be set correctly.
It took some experimentation to get the flags right:
QItemSelectionModel::Current
Hopefully, these are the correct flags across all supported
Qt versions!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView, we have a very fundamental problem: When
On the one hand, we get informed of user-selection in the
DiveListView::selectionChanged() slot. This has to set the
correct flags in the C-backend.
On the other hand, sometimes we have to set the selection
programatically, e.g. when selecting a trip. This is done
by calling QItemSelectionModel::select().
But: this will *also* call into the above slot, in which
we can't tell whether it was a user interaction or an
internal call. This can lead to either infinite loops or
very inefficient behavior, because the current dive
is set numerous times.
The current code is aware of that and disconnects the
corresponding signal. This is scary, as these signals are
set internally by the model and view. Replace this
by a global "command executing" flag in DiveListNotifier.
The flag is set using a "marker" class, which resets the flag
once it goes out of scope (cf. RAII pattern).
In DiveListView, only process a selection if the flag is not
set. Otherwise simply call the QTreeView base class, to reflect
the new selection in the UI.
To have a common point for notifications of selection changes,
add such a signal to DiveListNotifier. This signal will be
used by the DiveListView as well as the Command-objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have to avoid that undo/redo removes the currently edited
dive from under our feet. This code can be removed once proper
undo/redo (including editing) is implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This refactors the undo-commands (which are now only "commands").
- Move everything in namespace Command. This allows shortening of
names without polluting the global namespace. Moreover, the prefix
Command:: will immediately signal that the undo-machinery is
invoked. This is more terse than UndoCommands::instance()->...
- Remove the Undo in front of the class-names. Creating an "UndoX"
object to do "X" is paradoxical.
- Create a base class for all commands that defines the Qt-translation
functions. Thus all translations end up in the "Command" context.
- Add a workToBeDone() function, which signals whether this should be
added to the UndoStack. Thus the caller doesn't have to check itself
whether this any work will be done. Note: Qt5.9 introduces "setObsolete"
which does the same.
- Split into public and internal header files. In the public header
file only export the function calls, thus hiding all implementation
details from the caller.
- Split in different translation units: One for the stubs, one for
the base classes and one for groups of commands. Currently, there
is only one class of commands: divelist-commands.
- Move the undoStack from the MainWindow class into commands_base.cpp.
If we want to implement MDI, this can easily be moved into an
appropriate Document class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
AddDivesToTrip, CreateTrip, AutogroupDives, RemoveAutogenTrips
and MergeTrips basically all did the same thing as RemoveDivesFromTrip,
which was already implemented. Thus, factor our the common functionality
and hook it up to make all these functions undo-able.
Don't do the autogroup-call everytime the dive-list is rebuilt
(that would create innumberable undo-actions), but only on dive-load /
import or if expressly asked by the user [by switching the autogroup
flag].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Keeping undo-history across load makes little sense. The user was
expressly reminded that they have unsaved work.
For import (from other logs or the dive-computer) an undo-functionality
would be desirable. Nevertheless, this is rather complex since
new and old dives are merged. Implementation would require a finer
backend<->undocommand interface. Thus, leave this for now until more
experience with the undo system is acquired.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By making this modal, we can use a local variable and remove the
nasty "deleteLater()" hack to reclaim the resources after the
dialog closes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Poseidon MkVI logs (.txt) were special cased in MainWindow.cpp,
which led to a user-interface inconsistency. In some cases
[user chooses ".txt" (non-Poseidon) and ".csv"], *two*
import-dialogs were shown.
Move handling of Poseidon MkVI logs into DiveLogImportDialog.
There are already other "special" cases handled in this dialog.
At the moment, this shows the first 10 depth-values, which is
kind of useless, as this will all be at surface level. We
might think about something more useful.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QByteArray::data() provides access to the underlying data
for direct manipulation. Thus, the construct
csv = fileNamePtr.data();
found in MainWindow::importTxtFiles() suggests that modifications
to csv also affect fileNamePtr. This is *not* the case, because
csv itself is a QByteArray. It is therefore constructed from
the data.
Replace this treacherous construct by a simple assignment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On CSV import, the dive list was recalculated after the import
dialog was shown. This is pointless, as no dives are yet imported.
Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In d815e0c947 a dive_table pointer
was added to the parsing functions to allow parsing into tables
other than the global dive table. This will be necessary for undo of
import and implementation a cleaner interface. A few cases, notably
CSV and proprietary formats were forgotten.
Implement parsing into arbitrary tables also for these cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A few of these prototypes were already in import-csv.h.
Put them in an 'extern "C" { ... }' block.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The << alternative can reallocate the vector, but we know it's size, so
preallocate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unamed namespace behaves the same way as static variables in C source.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Nowadays, we edit dives just by starting to enter data for the dive.
There is no need to explicitly ask to start editing the dive, using the
now removed menu option. This was a left-over of a long past history.
This is fallout from PR #1673.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
As described in the referenced issue, we where able to navigate to
nonlogical static pages (like information, statistics. extra data) when
adding a dive. These are output style pages that make no sense on
edit or add. Further, disable access to some pages when entering edit mode.
Notice that the small change in file mainwindow.cpp is simply
because this this not work at all, and became superfluous any
way.
Fixes: #1445
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Actually remove the Subsurface webservice UI from the source, and
deal with all the fallout.
Notice that a part of the change in subsurfacewebservices.cpp is
a block of code that becomes unused, but might contain some valid
logic to be used later. Very similar code is in core/gpslocation.cpp.
And as I earlier broke something here, the unused code is ifdef-ed for
now.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This reverts commit 321a920a98.
It appears that the load_xxx functions aren't called, so while the correct
values are stored to the settings, they aren't retrieved. Let's revert while
this gets fixed.
Fixes#1609
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The variables referenced are moved into qPref in earlier commits
so in general all QSettings calls are replaced by qPref*:: calls
Signed-off-by: Jan Iversen <jani@apache.org>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
