We need to make sure the model is avaliable for the table
until it hits the destructor.
Fixes#347
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
See https://github.com/Subsurface-divelog/subsurface/issues/342. The reason is
that we never get a DC_EVENT_DEVINFO when doing a memory dump. Just do not
offer to update firmware when we are creating a libdc dump.
Full credits of this fix go to Anton.
Fixed-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On some divecomputers we download all the data from the device and
then parse the data afterwards just in memory (at which point the
progress bar has already run all the way to 100%). So don't try to
show the dive number and time in that case.
Fixes#335
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we run into an error during the download, stop the timer that
triggers the update to the progressbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes an issue where beginRemoveRows is called with argument -1
in DiveImportedModel::setImportedDivesIndexes.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Yes, currentdive can be undefined in case of of a new logbook and starting the planner
right away. Do not abort on that.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Data such as cilinders and used gasses are populated fromn the currently
selected dive when starting the planner. It is more logical to use
the dive mode (OC, CCR, pSCR) of the currently selected dive
as well. This commits changes this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Applie a more strict filter to URL handling in dive notes:
The URL needs to have:
- Scheme like "http:" or "mailto:"
- Host name like "www.test.de" or path like "/pathtosomewhere/"
Otherwise strings like "OTU:" or "Runtime:" are treated as URL.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
URLs in the dive notes are detected today. A tooltip is displayed and
one can follow the URL by Ctrl-click.
In the function fromCursorTilWhitespace there is an issue with incorrect
return value of Qt (5.7?!) function cursor->movePosition(). This value is
erroneous true in some condition e.g. if the cursor is inside a table at
the very beginning or the very end of a table line and not moving any more.
This can cause the function end up in an infinite loop.
Bugfix adds an additional exit criteria for the loop if the string is
not growing any more.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
See https://github.com/Subsurface-divelog/subsurface/issues/253. The original
behaviour (greyed out when disconnected) is restored. Not sure where and when
got lost, but this simple change fixes it.
Fixes#253
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While the new syntax is nicer and faster, this isn't supported prior
to Qt 5.6 and we still support 5.5 on older OSs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify logic of handling the Message that this
dive is being modified.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Maintab is one of our most complex classes, and it's
something I'm not actually proud of. But it currently
works and the idea of splitting it was in my head for
quite a while.
This is the third or fourth tentative of splitting it,
and this time I let the most complex part of it untouched,
the Notes and Equipment tab are way too complex to untangle
right now on my limited time.
A new class 'TabBase' should be used for any new tab that
we may create, and added on the MainTab (see the new lines
on the MainTab constructor).
Also, Extra Info, Information, Photos and Statistics where
ported to this new way helping reduce the number of
lines and functions on the MainTab quite a bit.
Overall this is a step in the right direction for the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Stefan suggested "Maybe it would be nicer to move the 3 fields for the
maximum pressure for N2, He, O2 for MOD to the right in the UI window
exactly below the maximum field for the O2 (where we now have
minimum + maximum)."
And I agree, so this is the change.
At the same time, reset the tab-order to a logical one.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial typo fix, suggested in issue #274. Apnea is more common than
Apnoea, and Apnea is also used in the code already, so, more common
and more consistent. Hmm. A lot of text for a one letter fix.
Close of issue suggested #274.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Accessing Facebook stuff without a dive selected (as in an empty logbook)
just SIGSEGVs. Just be more carefull.
After this fix, it is still possible to upload an "empty dive" to FB. Ok,
a little pointless, but a nice picture of the Subsurface logo is uploaded
to FB. Consider it an easter egg :-)
Fixes: #280
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The same ComboBoxDelegate is used for picking a cylinder model
and picking a gas in the planner waypoint table. In the former
case we want to allow the user to edit the string in the second
we don't.
The difference is not if we are in the planner but which use of
the class. So add a bool allowEdit to the constructor.
Fixes#272
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
In preferences->profile:
Move "bar" from text description to entry field (5x)
Move "l/min" from text description to entry field
Add suffix "%" to GF values
Rename VPM-B conservatism
In planner preferences:
Add prefix "+" to VPM-B conservatism
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Warning introduced in e8c918622f:
desktop-widgets\templateedit.ui: Warning: The name 'horizontal
Layout_3' (QHBoxLayout) is already in use, defaulting to 'horizontalLayout_31'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Bottom pO2 gas option in planner should be always enabled because
also recreational dives can use nitrox and produce "high pO2" warnings.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Going to "Template -> Edit" now has a field to enter the
border width (in pixels as only that makes sense in CSS as a flexible
unit, TMK).
This field modifies the template_options.borderwidth Grantlee
property which is part of the bundled templates already
and allows the users to modify the borders of tables.
The C++ implementation was missing, while the HTML (template)
implementation was already in place. Overlooked during GSoC.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks the UI as modified and updates the maxdepth of the dive; it
ignores changes to the duration, doesn't modify the profile, so it's
nowhere near ready.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hide them for now. This doesn't change anything visible, it's just
putting in place the pieces for later use.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4 file types (that are very rarely used), did showup in the
import-import dive logs menu (e.g. the file filter), but were
missing from file-open logbook file type filter.
Just added them to the file-open part to be more consistent.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
It seems that in the .ui file, keyboard shortcut strings need
the notr="true" attribute to make them appear also in translations.
I found this on http://www.qtcentre.org/threads/62774-Translation-of-Shortcuts
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The cylinder table was constructed very ealy from the contructor of the
planner, so early that the tr() functions are not registered. This fix
instantiates the cylinderModel from the maintab (as it is done
with, for example, the weightsModel) and lets the planner user
this instantiated (and proper translating) cylinderModel.
Fixes: #206
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Remove the default stylesheet ("Courier" 13pt) from the planner output QTextEdit.
Remove the content of the html property of the QTextEdit because we overwrite it when doing setHtml.
After printing copy the original dive notes string displayed_dive.notes back to the QTextEdit
Advantages:
Display is according to font settings.
ctrl - mousewheel for zoom always works.
Drawbacks:
Printing font is same as display font but can be adjusted by zooming before.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The limits set in diveplanner.ui is intended for the unit set there,
meters. If we move between units we need to update the limits to.
This fixes#201
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Fixes#170 on GitHub
Simple catch function for double click events in the divelist,
prevents users from trying to edit the divenumber ithe wrong way.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When replanning a dive, do not set the surface pressure when it is 0.
Same for salinity.
This closes#161 .
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds support for notifying Ostc 4 users about new firmwares when
they download dives from their computers, gives them the option to
trigger the upgrade flow.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This way the menu entry becomes the togglee it appears it was designed to be in
the first place.
This closes#129
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes all references to WebKit if cmake option USE_WEBKIT is enabled.
For the user manual it changes it to WebEngine (seems to work for me).
Similar for the Facebook connection (minus a reference to a cookie jar).
This I could not test at the moment, as I wrote this on a train.
Printing does not work, it is a null operation at the moment. Currently,
large parts of of the printing code are commented out as there is no direct
way to access page elements in WebEngine. It seems this needs to be done
via Javascript (with a callback invoked). There is new functionality in
WebEngine to render a view to a PDF file but this needs more work (and
probably some thoughts towards page breaks).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Use more general wording about bluetooth preparations, because nowadays
there are more computers than the Ostc Sport which use bluetooth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of OSTC devices have grown, and this updates our lists of for
which devices we should check for firmware updates.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the menu entry or Ctrl-R is designed to renumber all dives, but
using the context menu renumbers only the selected dives. With this
change it becomes more obvious to the user what's happening.
Fixes#942
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems the timestampt of QMouseEvents are not reliable on Linux. So we
better use currentDateTime to detect a double click.
Fixes#1103
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
