The dialog gives the user 3 seconds to undo the delete and then disappears
without any user interaction.
This isn't hooked up, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As it turns out, the van der Waals equation gives results that are
numerically not really useful, so we use the Redlich Kwong equation
which is, according to Wikipedia, much more accurate, which can be confirmed
given the empirical values for air.
As opposed to the previous approach with a look-up table, this takes
into account the actual gasmix. This always assumes the gas to be at
20 degrees Centigrade.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the recent refactoring of the DiveHelperObject class, some
more Q_PROPERTIES were added and can be used with the Grantlee engine.
We expose some of the additions to the user via the manual.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"weights" and "cylinders" are QStringList Q_PROPERTIES, and Grantlee
should be able to render them, but it doesn't.
To be able to print the whole list of weights and cylinders we
introduce two new QString properties "weightList" and "cylinderList".
The variable replacement in the previous patch deals with the
conversation of the user side HTML, e.g.:
USER -> INTERNAL
"{{ dive.weights }} -> {{ dive.weightList }}"
"{{ dive.cylinders }} -> {{ dive.cylinderList }}"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current Grantlee template loading scheme does not
allow a preprocessing layer. With the recent DiveObjectHelper
changes the layer is required if we don't want to add a set
of dummy methods and Q_PROPERTIES which will only inflate
the DiveObjectHelper class.
Use the already present helper readTemplate() to load the
raw HTML template and pass it to a static function which
does some variable replacement to accomudate DiveObjectHelper.
This change is done for the sake of not breaking the Grantlee
HTML variables on the user side!
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reduces the margin to use more of the available space and also makes
the first column slightly wider so the word "Cylinder" isn't broken on a
Nexus 6p.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Normally this is triggered when the DiveDetailsView component is
completed, but since QML isn't recreating this component unless we switch
to a dive a couple of spots in the dive list away from this one, we
wouldn't get any changes in the data reflected in the profile.
But since this now redraws the same dive that potentially was drawn last,
we need to make sure we call plotDive() with force=true.
I also suspect that this could help with the strange bug that sometimes we
show a blank profile after certain edits.
See #1013
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a reported case of an import of a dive that gave a salinity of
35g/l. This is an actual salinity (an amount of salt in the water) but
for subsurface the salinity is actually the density of the water. So for
too small values of the salinity add the density of fresh water.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We could in theory make this dependent on the gasmix, but for now let's
just assume (incorrectly) that everything we breathe acts like air.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is questionable, but perhaps useful.
When showing imperial cylinder sizes, show both the nominal value (with
no compensation for compressibility of the gas) and the "actual" amount
of gas the cylinder contains.
So an AL80 will show as a size of "80 (77)cuft", because while 80 is the
nominal size, the actual amount of gas that will fit is just 77 cuft.
[Dirk Hohndel: adjusted to take translation of the unit into account]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had two totally different usage cases for "get_volume_string()": one
that did the obvious "show this volume as a string", and one that tried
to show a cylinder size.
The function used a magic third argument (the working pressure of the
cylinder) to distinguish between the two cases, but it still got it
wrong.
A metric cylinder doesn't necessarily have a working pressure at all,
and the size is a wet size in liters. We'd pass in zero as the working
pressure, and if the volume units were set to cubic feet, the logic in
"get_volume_string()" would happily convert the metric wet size into the
wet size in cubic feet.
But that's completely wrong. An imperial cylinder size simply isn't a
wet size. If you don't have a working pressure, you cannot convert the
cylinder size to cubic feet. End of story.
So instead of having "get_volume_string()" have magical behavior
depending on working pressure, and getting it wrong anyway, just make
get_volume_string do a pure volume conversion, and create a whole new
function for showing the size of a cylinder.
Now, if the cylinder doesn't have a working pressure, we just show the
metric size, even if the user had asked for cubic feet.
[Dirk Hohndel: added call to translation functions for the units]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually didn't make a difference for the common case, since our
simplified gas compressibility model had a compressibility factor of 1.0
up to 200 bar, and increased smoothly from there. As a result, the
common 2400 and 3000 psi workpressures didn't really see an effect from
this.
Not taking compressibility into account does kind of make sense for
cylinder naming, since the cylinder may be used for different gases with
very different compressibility characteristics.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks "surface_volume_multiplier()" static in preparation for
changing it to use an actual honest-to-goodness compressibility
estimation. Without that, it wasn't obvious that the function wasn't
used in other random places.
Also, remove the "wet_volume()" function. It was unused, but more
importantly, it was wrong. Yes, it was the inverse of "gas_volume()",
but when you calculate wet volumes from the imperial sizes, you don't
actually use the "real" gas volume, you use the idealized one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use random numbers for file names, both temporary filename when
creating a zip for divelogs.de upload and for filename on form data for
facebook upload. This does not require for true randomness but we still
want these to not be constant on each run of Subsurface. Thus we need to
initialize the random number generator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code was wrong (and in the case of metric display for weights >= 20kg,
spectacularly wrong) in more or less all cases.
Rounding. It's good for the sole.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows the user to delete the currently shown dive. This action takes
effect right away, no confirmation, it gets right away written to the
local git cache.
One idea for an undo operation here could be to simply reset the git tree
to HEAD^ and reload. Not elegant, but would work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of re-calculating all the interpolation data for each plot entry
(which means that we have a quadratic algorithm that walks over all the
plot-info points for each plot-info point), we can just update it
incrementally within any particular interpolation segment.
The previous cleanups made the code sane enough to understand, and makes
it trivial to see how you don't have to recalculate the full thing.
This gets rid of the O(n**2) algorithm, and it instead becomes O(n*m)
where 'n' is the number of plot entries, and 'm' is the number of gas
segments (which is usually a much smaller numer, typically "1").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the two bigger simplications, this just re-organizes the code to do
the "interpolate.pressure_time" update that is shared among all the
"after segment start" cases in just one place.
That leaves the get_pr_interpolate_data() much simpler, and makes it
much clearer what it actually does.
In particular, it becomes very obvious that "interpolate.pressure_time"
is constant for one particular segment (it's the total pressure time),
and that "interpolate.acc_pressure_time" is the one that gets updated
for every entry.
The next step is to only call this for the first entry, and then update
just the "acc_pressure_time" in the caller.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Getting rid of the pointless always-zero pressure now makes it obvious
how some of the remaining code can just be removed too: there is no
point in re-initializing the pressure_time entries to zero at the
segment start, because they started out zero and we just checked that we
don't do anything to them before we hit the segment start.
Similarly, now that the silly pressure testing is gone, it is obvious
that the code for "i < cur" and "i == curr" cases is identical, and the
two cases can just be collapsed.
Signed-off-by: Linus Torvalds <torvalds@ linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the function fill_missing_tank_pressures(), we only ever call
get_pr_interpolate_data() if "pressure" is zero. So passing it in as an
argument, and then testing whether it is zero or not, is just totally
pointless, and only obfuscates things.
This whole thing seems to be due to people editing the code over time,
with the tests becoming superfluous as the code around it changed, and
nobody looking at whether it actually made sense any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow negative depth or depth beyond 500m.
Additional checks that the gas mix is possible (even thought QML code
SHOULD only allow valid combinations).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The input is restricted to
EAN100
EANxx (with 'x' one of 0..9)
AIR
xx/xx (with 'x' one of 0..9)
xxx (with 'x' one of 0..9 and the number <= 100)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We (ab)use fake_dc() to create a pleasing profile for a manually added
dive. Based on it's intended use, fake_dc() simply handed back a dc
structure that pointed at staticly allocated samples - that's obviously
(now that I think about it) going to blow up in my face if I edit a
manually added dive more than once.
So now we have an option for fake_dc() to actually allocate the samples -
this way the rest of the code can treat these samples as we would treat
samples created any other way. We can free them and replace them with a
new set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We only need to deal with this if the dive changed. And in that case, if
we calculate a new fake DC, we need to clear out the meandepth as
otherwise the algorithm will try to match both max and mean depth. Since
the user potentially changed the max depth that could have very odd
consequences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user explicitly sets the units when editing or adding dives, we
used to change the display preferences. This was changed for some but not
all fields in commit 6252d0cd3b ("While parsing weight and pressure we
should not change the users settings")
Now we do this consistently for all inputs.
Also, when editing the depth of a manually added dive, we now throw away
the samples (as those are certain to be inconsistent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- coding style (ugh - I should have fixed that when I first committed them)
- remove redundant variables
- add similar code to the length and temperature helpers
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A dive with zero duration creates an odd profile that is 2min 30seconds
long and looks just weird. Instead, simply show a text that there is on
profile shown for such a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this just tests for zero duration, but maybe this should also
return true for positive duration and max depth of 0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If cylinder does not have start and end pressures assigned, attempt to
grab them from the samples instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It is better to use the proper function to test if cylinder is in use
than just checking the description.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is more consistent with the rest of our UI
To make this work you once again need changes to the mobile components
that aren't upstream, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First cylinder only, show warning if there are more than one cylinder defined.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
