It doesn't really make much of a difference, but it can be visible
especially with lots of tight samples. Miter joins really look horrible
for acute angles.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oooh, pretty.
Or not. The temperature graph is usually ugly as hell, but Dirk has the
cool dive computer with lots and lots of temperature readings. Which
makes the graph a pretty graph, rather than a butt-ugly staircase like
mine.
Next time: get a dive computer with an OLED screen, and that can draw
pretty temperature graphs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. without the actual text, because I'm a "random plots that cannot
actually be interpreted" kind of guy.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The build instructions are in the git commit log too, but let's make
them a bit easier to find.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They get created when the equipment thing doesn't have a name for the
cylinder, but we don't want to save that lack of description.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's quite often obvious crap for the "doesn't exist" or "plain air" case.
So if it's reporting 100% O2, we just ignore it. Sure, it could be
right, but for the dives I have I know it's just libdivecomputer being
wrong.
Same goes for obvious crap like 255% Helium.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So this actually reports the dive data that libdivecomputer generates.
It doesn't import special events etc, but neither do we for the xml
importer.
It is also slow as heck, since it doesn't try to do the "hey, I already
have this dive" logic and always imports everything, but the basics are
definitely there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're going to start to want to allocate dives and samples for the
libdivecomputer import too, so let's clean things up a bit for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of writing out the progress events, use them to update a real
progress bar.
Also, we need to handle gtk events while busy with the dive computer
reading. That should *probably* be done with a threading model, because
libdivecomputer does seem to have some timing sensitivity - I'm getting
"failure to read memory block" if I make that loop do the standard
while (gtk_events_pending())
gtk_main_iteration();
thing. Besides, even if we did do that loop, it would still cause
problems when the libdivecomputer code is stuck reading a serial line
that doesn't respond or whatever.
But for now this ugly hack is "good enough" to get further.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This actually gets me far enough that it prints out all the dives on my
dive computer. It doesn't actually turn them into real dives yet,
though - only a series of ugly 'printf's so far.
And it hangs after printing the last dive. So I'm doing something wrong.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. fill in the event parsing. This doesn't generate the fingerprint
like the example does, I just don't care about that yet.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. this now registers the dive parsing callback, and starts to parse the
data. So I can see the last divetime on my Suunto Vyper Air now.
Still a lot more boilerplate stuff to go, though. The libdivecomputer
interfaces really are pretty insane: why should the caller set up the
dive parsing for each computer type, when libdivecomputer knows what
types it has? IOW, much of that boilerplate should be hidden inside of
libdivecomputer, rather than exposed to the user.
But whatever. I'm taking pieces from "examples/universal.c" as I go
along (it's under LGPL 2.1). I want to do it in small chunks just to
feel that I understand what's going on, rather than just blindly copying
it all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. start some error reporting, and register some early (empty)
callbacks.
This still doesn't actually do anything. But commit early, commit
often: when I start seriously breaking things, I want to have a "hey,
this still at least compiled" state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
libdivecomputer already uses 'gasmix_t' for its own gasmix thing. I
don't like th eway we step on each others name spaces, but hey, might as
well just use 'struct gasmix' and avoid the typedef.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so this is quite broken right now: it doesn't actually really *do*
anything, and it now requires that you have libdivecomputer all set up
and installed.
That is fairly easy:
mkdir ../src
cd ../src
git clone git://libdivecomputer.git.sourceforge.net/gitroot/libdivecomputer/libdivecomputer
cd libdivecomputer
autoreconf --install
./configure
make
sudo make install
but you may feel that this is not exactly useful considering that
nothing actually *works* yet.
Some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it denser by putting the dive number/location in the frame label,
and make it size up and down more naturally.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm trying to make sure that we can shrink the main window and still get
a useful experience. Sometimes you have small bad netbooks when diving..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you want to re-number your dives - either because they didn't have
any numbering at all, or because you forgot about other dives - you now
can.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We really do want to "pack" them, rather than use up the whole size. I
think.
I may end up playing around more with this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When fixing the unit changes, I broke the dive buffering logic entirely
for switching between dives. Duh.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Diving Log temperature reading is in Fahrenheit for the samples (for
the per-dive water/air temperature it's in Celsius). But it seems to
have a bug where a lack of a sample has been turned into 32 Fahrenheit
(which is 0 celsius). This is despite the dive itself having a water
temperature of 8 degF.
Just throw away those bogus freezing temperatures. Sure, they can
happen, and ice divers are crazy - but in this case I know it's just an
error in the log, and it looks very much like a Diving Log bug.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LP85+ name is not something we'd normally want to recognize. The LP
cylinder names all tend to be by the "+" pressure anyway, and that's
what we do in the equipment handling naming.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we change units, we need to flush any currently active dive
information in the old units, and then carefully reload it in the new
units.
Otherwise crazy stuff happens - like having current cylinder working
pressure values that are in PSI because that *used* to be the output
unit, but then interpreting those values as BAR, because we changed the
units.
Also, since we now properly import working pressure from Diving Log,
stop importing the (useless) cylinder description. The Diving Log
cylinder descriptions are things like "Alu" or "Steel". We're better
off just making up our own.
Finally, since Diving Log has cylinder size in metric, make sure that we
do the "match standard cylinder sizes" *after* we've done all the
cylinder size conversions to proper units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oh Gods. Why are all other scuba programs so f*&% messed up?
The Diving Log cylinder working pressure is in bar - which is all good.
But their pressure *samples* are in PSI. Why the h*ll do people mix up
units in the same damn file like that? I despair at the pure
incompetence sometimes.
I suspect the pressure samples aren't "really" in PSI: they are probably
in some user-specified units.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some people want to know how many dives they have under their belt, so
let's save and restore the dive number if it exists.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a few more predefined cylinder types to the static list, but
perhaps more importantly, if we try to show a cylinder description that
we haven't seen before, we automatically add that description to the
list as well.
This way, if people have their own cylinder types, our cylinder
management will automatically figure them out and make it easy to enter
them.
NOTE! It might be best to add the new cylinder description at dive log
load time, rather than at 'show' time.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We also need to actually fill the model store with the cylinder models
we have in our dive lists to begin with.
This makes it all *trivial* to add a new cylinder model: just use a new
description, fill in the size and working pressure, and you're done.
The type automatically gets filled in, unless that description already
existed (in which case we leave it alone).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the output units are set to cuft and psi, then we should show the
cylinder size and pressure properly.
NOTE! In the absense of pressure data, we *always* show the cylinder
volume in liter. There's no way to convert it to imperial units, since
the imperial units are not in physical size, but in air volume
normalized to surface pressure..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We used to have the heuristic that if we saw a cylinder working
pressure, then the cylinder size would be in cuft. Which meant that we
couldn't export our working pressures, because it would mess things up
on import.
But working pressure is actually nice to know, if you ever work with
cylinders in imperial units. So now that the import is fixed, add the
working pressure to the export.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That just screws up the good xml files that have everything in
well-defined units and chose the sane metric units.
So do the cuft -> liter conversion only if the input units are
explicitly CUFT, or known ambiguous input (SUUNTO).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems to be sufficiently useful to be worth updating the dive
information now.
This still doesn't handle multiple cylinders in any way. I need to
think about the interface for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This doesn't actually change the cylinder type info in the dive, because
it's too broken for that. Instead it prints out what it would change
things to.
The gtk2 notion of text input focus is *really* odd. Why is the
cylinder type sometimes selected, and sometimes not?
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it about general equipment management, and start hooking up
functions to show new equipment information when changing dives (and to
flush changes to equipment information for the previously active dive).
Nothing is hooked up yet, and it's now showing just one (really big)
cylinder choice, so this is all broken. But it should make it possible
to at least get somewhere some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so it's not connected to anything yet, and the tank choices (that
don't do anything) are some random hardcoded collection, but maybe it
will do something some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of relying on our ad-hoc minmax finder, just use the local
minima/maxima information directly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way we can always find the actual min/max entry that generated the
local minima/maxima. Which is useful for visualization.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That seems to be the gtk2 way. Whatever. diveclog ends up defaulting
to metric units, because we all know that's the right thing to do.
However, I learnt to dive in the US, so I'm used to seeing psi and feet.
So despite the sane defaults, I want diveclog to use the broken imperial
units for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dirk likes purple. I mean - Dirk REALLY likes purple.
And what's better than "purple"? You got it: "funky purple".
So this shows the one- two- and three-minute min/max information in some
seriously funky purple fringing. It's not really necessarily meant to
be serious, but it's a quick hack to visualize the data until we figure
out what to *really* do with it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This turns the depth profile into a generic "plot_info" and calculates
minima, maxima and averages over 1-, 2- and 3-minute intervals for each
point. It also creates a smoothed version.
We currently don't actually show the results, but that's the next step..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. unless they are so shallow that they are basically at the surface.
These show up automatically in out min/max logic, so just go ahead and
show them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No change in semantics, I'm just contemplating doing some text renderign
from within the "minmax" function itself.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so it's really a 'double', but for now we're only using integer font
sizes, so let's see if we ever want to do anything but that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
