If "Edit dive" is selected from the dive list or the map view, switch
to a new mode, which shows the dive infos and the profile.
After the edit, switch back to the previous state.
Fixes#1213
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Confusingly, "Edit dive" did only work for planned / manually
entered dives. Change this, but only start profile-editing for
planned / manually entered dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This gets delete dive working properly.
Kirigami passive notification ends up hijacking area where the
"Add dive" or "Delete" or "Discard" buttons are shown. So after
deleting a dive the "Undo" button from the notification
keeps handling the touch events even when not visible.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Detection isn't required, but it makes things easier. For the Mares dive
computers we only see the Bluelink, so we can't tell which dive computer is
connected to it. We guess "Quad", but the user can pick a different one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons I cannot explain, running configure for libdivecomputer claims that
certain feature tests pass, even though those features demonstrably aren't
there. This is happening for two compiler warning flags (-Wrestrict &
-Wno-unused-but-set-variable) as well as the test for clock_gettime.
To work around this, we manually edit the config.h file and the created
Makefile before building libdivecomputer.
This happened on macOS 10.11.6 with clang-800.0.42.1 (part of Xcode 8.2.1).
Tangentially related to:
See #1263
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using one script instead of having the downloads in all build.sh ensures
consistency and lowers maintenance.
Note: this script is not intented to be run directly, it is intented to be
integrated in the various build.sh
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Made versioning identical to scripts/build.sh
Having the same version of 3rd party libraries across platforms
secures a more stable product.
Signed-off-by: Jan Iversen <jani@apache.org>
script/build.sh uses the builtin libxml2 and do not build locally,
updated build.sh and Subsurface-mobile.pro to to the same.
sadly enough xslt is not distributed for iOS so it must be built.
Apart from simplifying the script it saves build time
Signed-off-by: Jan Iversen <jani@apache.org>
script/build.sh uses the builtin sqllite3 and do not build locally,
updated build.sh and Subsurface-mobile.pro to to the same.
Apart from simplifying the script it saves build time
Signed-off-by: Jan Iversen <jani@apache.org>
In a "virgin" repo incl. libdivecomputer, starting by running
ios/build.sh caused an error in libdivecomputer,
because autoreconf was never run.
Changed build.sh to check if libdivecomputer/configure exist, if
not run autoreconf
Signed-off-by: Jan Iversen <jani@apache.org>
This patch allows users to set a bundle identifier,
without opening Xcode (set as env. variable).
If the env. variable is not set (like e.g. on Travis) it defaults
to org....
Signed-off-by: Jan Iversen <jani@apache.org>
We used to hard-code the bundle ID which meant that developers always had to
manually override the bundle ID in order to be able to sign the iOS app for
local testing. With this change, the official builds will continue to work
without manually opening the project in Xcode, yet other developers will use
the Apple-recommended format in order to set their own bundle ID.
This is based on a suggestion by Murillo Bernardes.
See #1246
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use git repos and checkout corresponding tags where possible.
Use more reliable servers to download source from.
[Dirk Hohndel: refactored Jan's original commit in #1241]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Updated INSTALL to point at packaging/ios/README
Updated README to 'facts'
Deleted ios_build_instructions as they are covered in README
[Dirk Hohndel: refactored Jan's original commit in #1241]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
...to explain the difference between building the mobile
version to run on desktop and crossbuild for a mobile OS.
This should address #1247
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When generating fake profiles for manually entered dives, fake_dc() and
plan() used different final ascent rates of 5 m/min and 4.5 m/min,
respectively. This led to dives that were 6 seconds longer than entered
by the user and to confusion. See #554.
Therefore, use the same ascent rate taken from the preferences field
flag.ascratelast6m in both cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The connection for the display of CCR-setpoint o2SetpointGasItem
was erroneous, being connected to partialpressuregasSettings. It
is now correctly connected to technicalDetailsSettings.
2) The colour of the setpoint graph is changed from PO2_ALERT (red) to
an orange colour in order to show setpoint in red only when it
exceeds 1.6. This emphasises the visibility of red parts of the
gas pressure graphs whenever gas limits are exceeed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
By not filling out this value, entering of manual dives was broken
for dive lengths starting with a digit 5 or higher.
Fixes#1211
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If there is no current dive, the macro current_dc returns NULL.
This led to a null-pointer dereference.
Reported-by: Martin Měřinský <mermar@centrum.cz>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit fc010456 introduced the units to column headers. Thus the
matching of these labels must take the unit into account when doing
automatic matching of the header line with our field naming.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This function looks for the last gas change before a
given time. We should initialize it with a gaschange
event as we might later use this event to read a
gasmix from it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Instead of always adding -O2 for CMAKE_C_FLAGS_DEBUG and
CMAKE_CXX_FLAGS_DEBUG allow the user to pass a custom value
via GCC_OPTIMIZATION_FLAGS.
Passing -DGCC_OPTIMIZATION_FLAGS:STRING=-O0 would disable
all optimizations.
Suggested-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The previous code would not add the non-LE address for dual stack
devices. Unfortunately, even with this fix we still don't get the
correct result for the dual stack Shearwater Petrel 2 that I have
for testing as Android incorrectly reports it as a BLE-only device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
