Globe: initialize doubleClick member
ShiftTimesDialog: initialize when (not sure this could be a problem)
SetpointDialog: dc could be uninitialized or could be 0 and dereferenced
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the distance calculations and removes a dependency.
This version uses propper math instead of my to simple previous version.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And use this to find a dive site within a certain radius of a GPS fix.
This will be used to figure out if dive sites might be the same.
This uses a new Qt5 component (Positioning) which was added in Qt5.2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were ignoring the displayed_dive_site
as we were adding it and the changes weren't
accepted yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were relying in the current_dive to display the
globe coordinates correctly - but this is not always
the case: you can be inserting a new dive site and it
isn't yet inside of the dive until the user presses
accept. So always pass the uuid of the dive site that
we want to display.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can only enter in editing state by opening the editing dialog, so the
mainwindow check is now invalid. and also we shouldn't set the editingmode
to false, since we will edit until the user clicks close.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we didn't have a proper dive_site_table, the dive sites where
scattered across all dives and so we looped over all dives to find the
dive sites and add them to the tree. Now this is a bit cleaner, a bit
faster.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The globe used to allow the user to pick a dive site if the dive didn't
have coordinates, but this is now wrong since when in dive site editing
mode we can select multiple times new coordinates for it, and it should
only be marked as finished when the user actually finishes it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit aggressive as it changes the globe with every single
character that's entered, but it's better than what we had before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As flo269 suggested in bug #507, a full view of Earth would be better
when a dive has no coordinates.
Fixes#507
Reported-by: flo269
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hook things up when double clicking the globe.
The user experience isn't consistent with what we do on the main tab
(i.e., no coloring of fields that are changed), but it seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This ONLY hides the old flag if the current dive is the only dive on that
location (which seems to make sense).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we don't modify the dive list, the new flag wouldn't show up until
we accepted the change - that's not user friendly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead be consistent with other parts of the code and put us in editing
mode so the user can accept / reject the change.
See #800Fixes#801
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
<marble/MarbleDebug.h> is not availaible in all Marble versions.
As Marble::MarbleDebug::setEnabled(verbose) is only used when
MARBLE_SUBSURFACE_BRANCH is defined, also include header file only when
MARBLE_SUBSURFACE_BRANCH is set.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling Subsurface with -v now gets you debug output. Of course, with a
regular "release" build of Marble you still won't see much. But with the
changes in the special Subsurface-testing branch you actually get some
very useful information when debugging a lack of maps in Marble.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only time we want the close button is when showing an error at the
bottom of the main window.
In the other cases (maintab, globe) we need to explicitly hide it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the isVisible() check failed, even though the message is,
indeed, visible. But it doesn't seem to hurt to unconditionally hide the
message, so I'm doing that instead.
Fixes#576
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reasons Marble appears to sometimes not detect double clicks and
call the correct callback. With this commit we manually intercept the
double clocks and route them to the right function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit fb82da58a2 ("Globe: assume that we are looking at the
current_dive") changed the prototype for
GlobeGPS::prepareForGetDiveCoordinates. This patches the dummy in
NO_MARBLE.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 2bc76beb65 ("Globe: we always center on the current dive") changed
GlobeGPS::centerOn to GlobeGPS::centerOnCurrentDive. This patches the
dummy in NO_MARBLE, too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStrings shouldn't be == "" to check for empty string, use .isEmpty()
QStrings shouldn't be != "" to check for non empty, use .size()
std::string shouldn't be cleared with = "", use .clear()
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4243fcb915 ("Dont set coordinates when two or more dives are selected")
Changed how the prototypes in GlobeGPS looks. This aligns NO_MARBLE
version of GlobeGPS with that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As in commit 3870bdafee53 ("Globe: we always center on the current dive")
passing in a specific dive here makes no sense - it's always about the
current dive.
Fixes#513
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify the API (we'll take advantage of this in the next commit).
We always center the globe on the current dive, so no point in passing
that dive in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 7f3b487c77 ("Restore the previous globe zoom level after
showing dive without GPS") I was a bit too aggressive in replacing a
deprecated API function - people still need to be able to compile against
Marble versions older than 4.10.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this only happens on Windows, but there we would change the
dive coordinates on a SINGLE click when editing a dive. With this change
we simply bail if the event isn't a double click.
Fixes#505
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a trip is selected (or for other reasons more than one dive), this
would change the GPS coordinates of the whole selection which almost
certainly isn't what the user wanted.
Instead, only allow changes of the coordinates on the globe if exactly one
dive is selected.
[Dirk Hohndel: massively rewritten and extended - but I didn't want to
simply "steal" the commit from Tomaz...
This now maintains the "zoom out mode" for dives without
GPS coordinates and deals with edits of multiple dives that
are initiated the "normal way" by starting to edit other
data as well.]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thanks to commit 83c5ab5871 ("Zoom out when dive has no coords.") we
show more of the globe when displaying dives without GPS data - but that
caused us to forget the zoom level we used before and so the experience
when switching back to a dive with GPS data was disappointing.
This makes sure we track the last valid zoom level and restore it when
needed.
I also replaced the deprecated zoomView() calls with setZoom() calls.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mouse activity on the globe should not select dives when one or more dives
are being edited. This improves the detection of that state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the globe zoom out to show it complete when
the dive has no coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users have requested a way to build subsurface without marble.
This hides all traces in the ui and creates a GlobeGPS-dummy thats
just a QLabel saying that marble is disabled, in case its shown
somehow. The dummy is there so we can just ignore the fact that marble
is disabled in the rest of the code.
Fixes#394
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
