Prervent tiny temperature changes from being exaggerated in the plot.
Also, shift pressure plot around a bit (if necessary) to prevent it from
ending in the same space as the temperature plato on the profile graph.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code in commit f99e1b476b18 "Trim the dive to exclude surface time at
beginning and end" failed rather badly if a dive has no samples at all -
which is true for many of our test dives.
This makes sure that we don't exclude data points if we never set up start
and end times.
Reported-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 6c52e8a2e5 ("Add plotting of the deco ceiling") for some
totally unexplained reason deleted one "else" statement, resulting in
some plot events not having a time at all. Which causes various really
odd issues if you hit that situation, including divide-by-zero etc due
to the difference in times between events being nonsensical.
It's just some odd mistake that was entirely unrelated to the other
changes in that commit.
Add the missing line back in.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows the values for all the graphs that are shown (depth,
temperature, tank pressure, pO2, pN2m pHe), but also correctly doesn't
display them when they are turned off or no data is available (prior to
this commit, tank pressure was always shown, even if no pressure samples
were available for the dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we calculate the interval for the tick-marks for the dive, we need
to limit 'i' to be within the size of the array. The code does that
with a "i < 8" check, but the fact is, we must never increment past the
last entry, which is 7 (the size of the array is 8, but the last valid
index is 7).
This only happens for unrealistically long dives. Which you can trigger
either by inputting insane values for a manually created dive, or by
merging two dives that are consecutive, but not close to each other
time-wise (eg on different days ;)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This extends on our current tooltip logic (which shows events when you
mouse over them) to show tooltips for the whole profile area.
If you mouse over an event, that is still shown in the tooltip, but
even in the absense of events, the tooltip will be active, and mousing
over the profile area will show the time, depth and pressure.
This can certainly be improved upon further, but even in this form it is
useful.
Fixes#9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't change any of the samples, we just don't plot (or consider for
dive time / mean calculations) the samples at the beginning or end of the
dive that are less than a certain threshold under water. Right now that's
an arbitrary 75cm which seems to Do The Right Thing(tm) for the dives I
tried this with - but I'm happy to look at other values if this causes
problems for people with dive computers I do not have access to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tec diving preference pane now allows us to set a partial pressure
threshold for each of the three gases. When the partial pressure surpasses
that value, the graph becomes red.
Fixes#12
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on suggestions from Linus (and a few iterations) we now simply have
the surface (i.e., background color / pattern) come down to where the
ceiling is. And we only do the angry red shading when the diver violates
the ceiling.
I think this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Plot a red-shaded area on top of the depth profile to indicate the deco
ceiling (i.e., the area into which it isn't save to ascend at this point
of the dive.
So far this is of very limited use as libdivecomputer doesn't give us the
necessary information to plot this. I have sent patches for the OSTC to
Jef, hoping that he will include them in an update. I don't know how many
other dive computers will make this data available - I still need to add
this to our native Uemis support.
This commit also fixes two cut and paste errors in the previous commit
6540be9bd924 "Process ceiling events and store ceiling data in plot_info".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing implementation failed on dive computers that did gas changes
based on events (instead of tracking them in the sample data like the
Uemis Zurich does that I tested the code with).
This commit moves the calculations slightly later in create_plot_info()
after the gas change events are processed and the plot_info data has been
fixed up. Now this works with the data from Linus' Suunto as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pN2 print shouldn't have been committed, but I don't want to try and
rewrite all the commit history. Oh well.
The pressure scale I am ambivalent about. It seems that it should be
useful - but that would require guide lines that coincide with the values
which would really throw off the visual for me. So I added the code, but
left it disabled.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't remember why we initially did this instead of ending the
horizontal red line whith the last data point of the pressure profile. But
especially nuw with more graphs shown the one line that extends past the
end of the dive looked really silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always want to print absolute maxima and minima - but not when multiple
consecutive data points all have the same value (this happens, for
example, when printing a pHe plot on non-helium dives - or when the dive
profile includes a brief surface intervall which causes all the partial
pressures to be at their minimum).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whatever I pick here, there will be dives where the different graphs end
up interfering with each other. I don't think there isn't an easy, generic
solution for this (but I can envision awesome non-easy solutions - they
just don't seem to be worth the effort).
But for most dives that I played with this seems to work pretty well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The algorithms attempt to identify "interesting" points where the user
might want to know the value of the graph.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust the color for pN2 to the standard for this gas (black). We keep pO2
green (even though the ISO 32 color for that would be white). pHe is
marked in brown (which is the matching standard color).
Calculate correct partial pressures for the synthetic plot info points at
the beginning and end of the dive.
Minor fine tuning to the positioning / scaling of the temperature plot
when partial pressures are plotted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So few of my dives are on air that at first I didn't notice - but for
those dives we set the o2 permille to 0 - which of course causes incorrect
(and extremely deadly) pO2 of 0...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fairly simplistic change that modifies the way we calculate the "maxdepth"
for a particular dive as that is used to scale the plot vertically.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this is done unconditionally. This already starts some of the
infrastructure for other gases, but so far only O2 is handled.
We also need a pressure scale on the right to make this useful - or we
need to do peek / trough pressure prints like we do for temperature and
depth.
Finally, I think I want to move the plot further down, maybe make the
whole plot area taller if we are plotting partial gas pressures as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to be unobtrusive, but add more information for people
who aren't satisfied with the numeric value we put inside the plot to mark
local peaks and troughs.
See ticket #9
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here is what Linus reported:
I think you have made a mistake in trying to translate some of
libdivecomputer.c
Translating some of those things based on locale is *wrong*, because
they are saved in the XML file.
That covers at least the warnings: they'll get translated when you
import them, and then saved to the XML file as that translation, but
now if you start subsurface in another locale, they will not get
translated back.
So translating XML file contents is fundamentally buggy. It just
shouldn't be done.
So all the "translations" for the event handling are buggy, and
generate crap. Please don't do that. Leave them as English.
And of course he is absolutely right. However, instead of not translating
them at all, this commit fixes things a better way - we now mark the
strings for translation but store the original English strings everywhere
(in the in-memory data structure as well as in the XML file). Only when we
actually display something on the screen (in a tooltip or in the filter
dialog) do we actually translate the strings into the native language.
This should address both Linus' issue and the desire to have localized
event texts.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tests have shown that the most multi-platform way to do printing with GTK is
to use GTK_UNIT_INCH (or GTK_UNIT_MM) with GtkPrintOperation. Tested on
Linux, OSX, Windows.
However this requires the appropriate scaling for Pango and Cairo to be done,
with separate plotting logic for printing and drawing on the screen. To achieve
that, profile.c:plot() now accepts a scaling parameter from type
"scale_mode_t" defined in "display.h".
Also due to new scale, small decimal numbers (such as 6.12345) cannot be well
stored in "cairo_rectangle_int_t" therefore it is replaced with
"cairo_rectangle_t", which uses doubles to provide Cairo with a drawing
area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Minor whitespace cleanup.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Freedives can easily exceed the assumed ascent/descent rate, which
results in wacky dive profiles. Add a check to make the ascent and
descent fit within the duration of the dive.
Merge freediving tweaks (zoom in on short dives etc) from Maximilian
Güntner.
Trivial conflicts in display.h due to unrelated printing stuff just
happening to be added nearby.
* 'freediving-tweaks' of git://github.com/mguentner/subsurface:
moved zoomed_plot to display.h
plot the time with a fixed padding (leading zero)
updated/corrected comment
added "Zoom" button and improved scaling
fixed indentation
use increments that make sense for 600 seconds
Plot shorter (apnea) dives with a reasonable scale
The previous commit was a patch from Lubomir, which also had some
whitespace fixes (to go with some new whitespace bugs to replace them)
in it.
I removed the whitespace changes from that patch (don't mix whitespace
fixes with other fixes, unless they are on the same lines!) but decided
to look for other whitespace issues, and this is the result.
I left the non-C files alone, some of the spec and script files also
have whitespace at the end of lines etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This completely changes how we keep track of selected dives: instead of
having an array listing the selection ("selectiontracker") or trusting
the gtk selection information, just save the information about whether a
dive is selected in the dive itself.
That makes it trivial to keep track of the state of selection across
group collapse/expand events, or when changing the tree view model. It
also ends up simplifying the code and logic in other ways.
HOWEVER, it does currently (re-)introduce an annoying oddity with gtk:
if you collapse a dive trip that has individual selections, gtk will
forget those selections ("out of sight, out of mind"), and when you do
*new* selections, the old hidden ones remain.
So there's some games required to make gtk do sane things. We may need
to either explicitly drop selections when collapsing trips, or make sure
the group entry gets selected when collapsing a group that has
selections in it. Or something.
There may be other issues introduced by this too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code iterates over a list that can be NULL, but happily dereferenced
it anyway. Oops.
This function really should be split up and commented more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull miscellaneous fixes, mostly UI stuff from Mikko Rasa.
Both this and the pull from Pierre-Yves Chibon created a "Save As" menu
entry and logic. As a result, there were a fair number of conflicts,
but I tried to make the end result somewhat reasonable. I might have
missed some semantic conflict, though.
Series-acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
* 'misc-fixes' of git://github.com/DataBeaver/subsurface:
Add a separate "Save as" entry to the menu
Changes to menu icons
Improved depth info for dives without samples
Divide the panes evenly in view_three
This fixes the bug that triggered the SIGSEGV that Linus worked around
earlier. I had forgotten to update this call path to the
edit_multi_dive_info function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This calculates a mean depth for the dive with a fixed ascent/descent
rate and an assumption that all of the bottom time is at the maximum
depth. It's not much, but it allows some derived values such as SAC to
make more sense.
The depth profile for such dives is now also generated with the same
assumptions instead of putting the samples at fixed percentages of the
dive duration.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
It should be possible to have a certain limit where we
stop zooming so that short dives are visible as such
at first glance. Therefore a "Zoom" button has been
added to the "Log" menu along with a shortcut (Ctrl + "0").
The user can now zoom/unzoom the plot and is still able to
quickly distinguish short dives from normal ones when
browsing the log.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
The time marker increments have also been changed to better values.
Also, display more time information for short dives.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Fix ugly printout, give colors proper names, make grid lines and alert
marker easier to see, and specify printer colors independently.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors aren't very pretty, and the grid lines are too thick.
This commit tries to improve that.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
We do all the pressures in mbar, which has plenty of precision for
interpolated pressures - even when we then do our discrete integration
over many samples.
However, when we calculate those interpolated pressure points, we should
make sure that we round the result correctly, otherwise the consistent
rounding errors (from truncating the FP value into our integer mbar
values) will result in a final pressure that is noticeably off in ugly
ways (ie "end pressure set by hand to 750 mbar, but shown as 748").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit abdee5b1b8.
There's no point in doing random hacks. Instead, do the intermediate
pressure calculations with proper rounding instead of always truncating
to mbar. With the math done correctly we have enough precision that the
end result of the pressure interpolation doesn't have the kind of errors
that caused Dirk to try to fix things up later.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While printing the last pressure in the calculated sequence may seem more
logical, given that the discrete series will create some amount of error
this simply looks wrong. Instead we pick the end pressure that was
manually set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some parts of the existing code used the depth at the time of the sample
to calculate the sac rate - it makes much more sense to use the average
depth. But that requires us to loop over the entries and average the
individual sac rates per segment instead of just using the beginning and
end depth of the multi-segment interval we use for smoothing purposes.
This may seem like a subtle detail, but it does in fact matter when we
plot the synthetic tank pressure values that we create when we have no
tank pressure data in the samples.
Another detail we change here is to not artificially start with a forward
looking segment of the full SAC_WINDOW but instead just start with the
first two data points and then simply let the time window grow until it
hits SAC_WINDOW - at which point it becomes a sliding window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the algorithm that picks the sac color to consider
+/- 1 l/min to be the same color (before the color changed every
time you crossed above or below the average which looked silly with
our synthetic "constant sac" values as those are discrete and oscilate
around the average.
This also changes the order in which things are drawn so so that the
pressure plot goes over the depth profile plot (so the red shading of the
dive no longer changes the color of the tank pressure plot).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use rgb_t for the sac colors, create a new set_source_rgb_struct function
and use that for the velocity values (in the depth plot) as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus suggested that instead of using absolute SAC values to base the
color on (which forced us to pre-define which SAC rates are green and
which are red) we should color the tank pressure plot relative to the avg
SAC rate of that dive - which I think makes the coloring much more useful
to spot when on your dive you were doing well and when you were not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar to color indicating vertical speed in the profile plot we now use
color in the tank pressure plot to indicate current SAC rate.
We use a 45 sec sliding window to make sure we cover at least two breaths
for each current SAC sample to avoid artificial oscillation based on
breathing rhythm for corputers with high sample resolution.
Not sure about the color coding that I'm using right now - it's green-ish
for SAC rates under 15l/min ~= .55cuft/min and turns yellow and red as you
go higher. That seems to work well for me, but for other divers this may
be way off (or at least not as useful). Maybe this should be configurable?
This is a lot more diver specific than the vertical velocity where there
are clear recommendations based on safety considerations on what is good
and bad.
As a side effect, this removes the color coding that showed you whether
you were looking at pressure data from samples (green) vs. interpolated
pressure data (yellow). Not sure if people really want to see that. We
might be able to indicate this differently (I am thinking different line
width or transparency or something along those line)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers randomly drop samples. That was no problem unless it
was the LAST sample. We work around that now
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. and fix the maxpressure to actually look at *all* the cylinders, so
that if you don't have sample data, but rely onmanually set cylinder
pressures, it now really is the max of all the cylinders.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We no longer look at the start and end pressure for a tank, if the tank
has valid pressure data in its samples (which makes sense). Sadly that
breaks the current pressure interpolation code. With this patch most of
those problems should be fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- make the text a lighter color so it stands out more
- change the heuristic when we print text to include both relative change
in temperature and time since the last text was printed
- print the first temperature we encounter
- allow an ending temperature to be printed if the last printed
temperature was before the 75% mark of the dive
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought we had fixed this before - but I guess it got broken again
somewhere. We now make sure that the plot_info ends on an entry with
depth 0.
Added test14 to verify the fix.
Also fixed cut'n'paste errors in a few test dive files.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some situations we could end up with no sample pressure and no
interpolated pressure at time = 0. This is now fixed.
Fix notes in test dive the exposed the issue.
Also change the code in create_plot_info to keep the number of samples and
the number of corresponding pi entries in separate variables. This avoids
future changes from breaking if they assume they can access
dive->sample[nr_samples - 1] (which is a reasonable assumption to make).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was exposed by the test dives, but it shows up in small ways with
real dives from some dive computers like the Suunto Vyper Air.
We now insert synthetic plot_info entries that match the gas change event;
to make this look smoother we insert either two events (one for the old
tank, one a second later for the new tank) if there is no sample at the
time of the event, or one additional event (and move the real sample back
by one second) if there is a sample at the time of the event.
This does expose another issue with some dives from Linus' computer where
the pressure in the samples dips below the end pressure noted for the tank
- which creates an odd "yellow up-tick" at the end of using the first tank
in the plot. Maybe we should not insert a synthetic "last of old tank"
event if we have a sample with valid pressure in the last NN seconds
before the gas change?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have more than four identical depth readings, the old code would see
those as local maxima and minima and print spurious depth values in the
profile plot.
Yes, in real sample data identical readings won't happen - but in
synthetic data they can and there this looks really bogus.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Finally getting more consistent overall in how we convert between the
different units and how we decide which units to display.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Designed along the lines of get_depth_units - except we don't define a
specific number of digits to show.
Use this in the one spot we need it right now in profile.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have the dive plot have two "filler" entries at the beginning
and the end, and indeed that is how they are allocated. However, we fix
up "pi->nr" later to be "lastindex+1", where "lastindex" is the index of
the time we surface.
So when we loop over the plot entries, we actually need to loop all the
way to the end: use "i < pi->nr" instead of "i < pi->nr-2".
We still do have the two extra filler entries at the beginning, though.
So depending on the loop, we might want to start at entry 2.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now it just plots something ridiculous, the code is really just
meant to be an example. We migth be able to plot a traditional
staircase plot and make it look somewhat saner by taking mean depth into
account (if it exists).
Right now it just plots a (skewed) rectangular dive profile using the
max depth and total time. Which is obviously insane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating the plot_info, the 'entry' variable pointing to the last
plot_info data was not initialized (because there was no data to fill
in), and was then incorrectly used to fill in the last tank pressure.
We also used to look at 'dive->sample[0].cylinderindex' even if no
sample[0] necessarily existed.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now they are displayed in one hbox which doesn't work if you have
many events - but the code itself works and correctly toggles the events
on and off.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a way to actually configure this in the app, yet, but
toggling the bits in the debugger shows that this works, so commit this
code now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step to being able to filter the events that we display in the
profile. We could (in theory) walk all the dives in the divelist when we
need this data, but it seems much more convenient to have them in an array
in one place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'ui' of git://github.com/dirkhh/subsurface:
Disable sorting by dive number
Fix oversight in preference implementation
Make columns for temperature, cylinder, and nitrox optional
Show dive number in dive list
Improve time marker handling and add printing of some time labels
We now draw time markers at most every 5 min, but no more than 12 markers.
For convenience we do 5, 10, 15 or 30 min intervals.
This allows for 6h dives - enough (I hope) for even the craziest divers -
but just in case, for those 8h depth-record-breaking dives, we double the
interval if this still doesn't get us to 12 or fewer time markers.
We label the first and then every other time marker with the minute text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk wrote the multi-cylinder support assuming that the dive computer
always gives the selected cylinder index in the sample data - that's
what his Uemis does, and it makes sense for any dive computer that
supports multiple pressure transmitters.
However, the other case is a dive computer where the pressure samples
are all from cylinder 0, and any other cylinder will have the starting
and ending pressure set by hand. And the gas change events show when
the cylinder change happened.
So this creates a "turn gas change events into pressure sample fixups"
phase just before we actually analyze the pressures. That way the
pressure analysis can alway sdo the right thing, regardless of how the
data was originally stores in the dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For the dive computers that give cylinder change events, we want to
re-write the cylinder index and pressure information with the event
information before we start analyzing the pressures. So instead of
filling the plot info and analyzing in one loop, split it up into two
phases. We'll do the "fix up cylinder pressure info based on events" in
between those phases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code keeps track of the segments of time when a specific tank was used
and interpolates the pressure values for that tank based on a simulated
average SAC rate for the times in which no pressure readings are
available.
This changes the way we used to plot the pressure when only beginning and
end pressure of a tank are known; it used to be a straight line, now it is
a sloped line where the steepness of the slope is proportional to the
depth at that point - which is much more realistic.
We also plot the pressures in two colors now. The old green for pressure
data that came from the input file (that is not the same thing as saying
it came from the computer - divelog for example appear to create pressure
readings in the samples even if it only has beginning and end pressure).
Interpolated values are plotted in yellow. If you have a sub-standard dive
computer which has a frequently failing pressure sensor, you can now tell
the parts of the plot where data was missing and we are filling in.
The function that prints the pressure text labels had to be completely
redone as it previously assumed one tank for the whole dive and
simplisticly printed that tank's start and end pressure at the beginning
and end of the profile plot with the y-values being the maximum and
minimum pressure...
This commit introduces a custom simplistic single linked list data
structure to keep track of the pressure information per segment - Linus
hated the idea of using GList for this purpose, and I have to admit that
in the end this was very straight forward to implement and made the code
easier to read and debug.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't right if you switch back to the same cylinder multiple times,
but for the first time it kind of works - just take the beginning
cylinder pressure if we have one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Too much cut-and-paste, as Dirk points out. With multiple cylinders,
we're not necessarily going to start at time zero.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It doesn't actually do multiple cylinders correctly yet, but it should
be a nice framework for it. And accidentally (not) it also ends up
drawing the final line for the end pressure of a single-cylinder dive
that has been fixed up by hand too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We draw a little red triangle (of hardcoded size - not sure if this SHOULD
scale with the size of the plot... I like it better if it doesn't) to the
left of an event.
We then maintain an array of rectangles that each circumscribe one of
those event triangles and if the mouse pointer enters one of these
rectangles then we display (after a short delay) a tooltip with the event
text.
Manually creating these rectangles, maintaining the coordinate offset,
checking if we are inside one of these rectangles and then showing a
tooltip... this all seems like there should be gtk functions to do this by
default... but if there are then I failed to find them. So instead I
manually implemented the necessary logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we passed in width and height and the routine itself decided to
keep 5% margin around each edge - oddly doing this with double precision,
even though this is all integer coordinates.
Instead we are now passing in a drawing_area. We are kind of abusing the
cairo_rectangle_int_t data type here - but it seemed silly to redefine a
new data type for this.
Width and height give the size of the TOTAL drawing area (as before).
x and y give the offset from the edges - so the EFFECTIVE drawing area is
width-2x and height-2y
This is in preparation for adding tooltips - those need to know the
coordinate offsets from the edges - so having this hard coded inside the
plot function didn't make sense anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And don't artificially end dives on min pressure
This may be a problem for dive computers like Linus' Suunto Vyper Air
where the failure mode seems to be _high_ pressure readings (that's scary,
btw). If the transmitter fails at the end of the dive the pressure plot
ends with incorrect high pressure. But that's simply a bug with the dive
computer and not something that subsurface should hack around. Maybe we
should offer a way to edit the incorrect data points instead.
Always ending on the minimum pressure is definitely wrong as it causes
bogus plots when you do a valve shutdown during the dive (which means that
valid data gets plotted incorrectly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were missing the last sample (which is usually a fast ascent).
Also, reduced the velocity smoothing to 15 seconds as the 30 seconds were
hiding too much valid information
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is *really* ugly. We really should just create some kind of widget
that when moused over will show the event. Or something. Rather than
putting text on top of other text: the events - when they happen - are
usually bunched together (PO2 warnings, max depth, fast ascent leading
to mandatory safety stop, you name it).
But at least this way we see that the data is there, even if we see it
in ugly ways.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The plot_info was never freed, so every time you'd plot something, we'd
leak memory.
I'm running valgrind to see if there's anything bad going on. So far it
all looks fairly benign.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the actual degree sign for temperatures (°F and °C), and make sure
everything uses the proper "set_source_rgb[a]()" wrappers to set the
colors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
