The information tab used displayed_dive to fill out its field.
For consistency with the main tab and in a bigger effort to remove
displayed_dive, use current_dive instead.
Only clear the fields if no current_dive is set. The code used to
clear the fields and overwrite them later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main-tab, when looking at a trip, the fields were filled
out with dive-data and then either hidden or overwritten with
trip data. Move the update of the fields into the corresponding
if-branch that is only active if on dive-mode.
This means removing the UPDATE_* macros, which updated or cleared
dive-fields depending on whether a current dive was set. These
operations are now performed explicitly in the corresponding
if-branches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure this is actually relevant for anything any more, but this
adds the USB device ID's for the Scubapro G2 Console and HUD versions.
It also fixes things to use the proper vendor name (a bit too much
cut-and-paste, where the code said "Suunto" instead of "Scubapro").
The real device ID changes are in libdivecomputer, this is just the
Android xml list for recognized USB devices that likely nobody really
uses.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds ID entries for the Scubapro G2 HUD (but no GPS parsing support
yet) and the Aladin H Matrix.
Also fix ndl/deco parsing for for Aqualung i450T.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This didn't use to matter, because none of the BLE-using backends did
retry on timeout until recently.
But Jef started doing packet sending retry for the Mares Icon backend,
and now we should make sure to distinguish the "IO failed" from "IO
timed out" cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the dive site selection widget there are two special entries
(add dive site with given name). Don't show this if the user didn't
enter a string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site selection widget implements a lessThan() function, but
that was never called. Apparently in a QListView one has to start
sorting by hand? Do just that.
In any case, the lessThan function was erroneous as it would happily
sort away the first two special entries. Fix it with a special case
for these to.
Finally use case insensitive string comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the filter-model, LocationInformationWidget would extract
the model from the diveSiteListView and then downcasts it. Instead,
it can access it directly, because the filter-model is a subobject
of LocationInformationWidget.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveLocationLineEdit stored a pointer to itself in a global variable
so that the DiveLocationModel can access it to access the filter text.
Instead, on change simply pass the filter text down from DiveLocationLineEdit
to DiveLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit c69ca4df80 removed the roleNames
function, which is not needed according to the docs, as a default function
is provided. For unknown reasons this broke the QML combo box.
Reinstate the function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Skip gas use calculation for the gas that was used in
the surface segment added by the planner in the end.
Reported-by: philippe@philmassart.net
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The dive-site line edit box features two special entries for adding
new dive sites. These should display different texts depending on
whether the current dive has a dive site or not.
The current check is wrong, because it used displayed_dive, but
since the last set of undo-changes, this might not be filled out
correctly anymore. Instead the code should check the actual current
dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive splitting code returns an error code when splitting fails, but
it turns out that the C++ UI code doesn't actually look at the error
code, and instead expected the resulting dives to be NULL if an error
happened and the split didn't succeed for whatever reason.
Which is kind of lazy of it, but we might as well clear the resulting
dives and make the UI code happy. This should fix the problem that
Celia Marlowe reported on the Subsurface google groups forum.
Reported-by: Celia Marlowe
Acked-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fixes: 145f70aab5 ("Undo: implement split-out of dive computer")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This struct is used to store the completers during construction
of the object. But it is never accessed afterwards. Therefore,
remove it from the object and remove the structure definition
from the header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most tabs in the dive-information widget have there own translation
units and ui-files. Only the equipment tab was married with the
main tab. Move it out to get more reasonably sized translation units
and some isolation.
Currently, this needs ugly hacks when entering / checking for edit
mode: Access to MainTab is via the MainWindow. And vice/versa, when
accessing the DiveEquipmentTab from the MainTab, the former is
hardcoded as the first item of an array.
These hacks will soon be removed though, when making equipment
editing undoable. The tabs will then be independent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller of said function used to check whether MainTab is
in edit mode. For this case there is already a function - use that
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only external caller of add_single_dive() used it to append a
dive to the global dive list. Rename the function accordingly and
remove the index parameter.
The internal caller can use the local insert_dive() function, which
doesn't consider selection. That shouldn't be a problem, as the
caller is doing import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding dives in an undo command, the index is saved in the
command. This seemed logical at first, because why calculate the
index more than once? But actually it made the code rather subtle
and brittle when multiple dives were added.
Moreover, this is a pointless optimization, as it doesn't optimize
the common case (only one execution).
Remove this for now and calculate the index on every execution. If
it ever turns out to be a bottle neck, it will be much more effective
to turn the linear search of the index into a binary search. A
further sensible optimization would be inserting in batches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Trips and dive sites were changed to use dive tables instead
of linked lists. But the memory used for the tables wasn't freed.
Do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tag-widget was only showing the completer if we were in edit mode.
The edit mode does not exist anymore - therefore remove the check.
Hopefully this has no unintended consequences, like the completer
not disappearing when it should.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Apparently, in some Qt-versions the destructor of the base class
calls hide on child-objects (according to Qt's object hierarchy).
This is obviously called after the derived class has been destructed.
In a concrete case, the base class of the destructed MainWindow
would hide the TabDiveSite object. That would reset the filtering
if a dive site was selected, which would indirectly access the
MainWindow, which is already partially destroyed.
Therefore, destroy the MainTab before destroying the MainWindow.
Do this by keeping it as a std::unique_ptr subobject. Thus, it
will be destroyed before the MainWindow and remove itself from
Qt's object hierarchy.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This feels more natural than selecting a single cell. Still,
the "delete" cell is not visibly selected, which give a
strange impression.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The model was not reset on file close, leading to weird effects.
New dive sites would be added at the end of a table full of empty
entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive tabs are disabled, when no dive is shown. The dive site tab
is implemented as a dive tab, which is of course conceptually wrong.
Moreover it has the nasty side effect that when adding an empty dive
site, no dives are shown and the tab is disabled, leading to a
UI dead lock.
Therefore, disable all tabs but the dive site tab. The proper fix
will be a refactoring of the UI.
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in dive site tab and some dive sites are selected, show only
dives at those sites. Simply read the selection and pass it to the
filter.
Start and stop filtering when switching to and from the tab,
respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the edit-dive-site tab the filter is switched to a particular
mode where only dives at that site are shown.
If we want to reuse this for the dive-site tab the mode has to
be extended to allow for multiple dive sites. This is trivially
done by replacing a pointer by a vector of pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of sending a signal when counts change, catching them
in the filter widget and update the window title there,
directly update the window title in the model. This removes a
signal/slot pair.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The handling of dive site merging changed and therefore the tests
have to be adapted.
1) Dive sites are recognized as identical based on their name.
Therefore, give the dive sites that should be merged the same name.
2) The dive site id of the first imported dive is kept. Thus,
merge and reverse merge produce two different output files.
Create a second file reflecting that fact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using a random UUID, use an SHA1 hash of name, description
and notes (if defined). This is necessary for testing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Editing the dive site of a dive may make a dive site appear
(first dive of that site) or disappear (the last dive of that
site was removed). Therefore, we have to reload the dive site
markers on editing the site of a dive.
This should be made smarter by only reloading the markers if
the dive site status actually changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive_site_has_gps_location() function already checks for the null
dive site. Remove redundant checks.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive site was not on the map because it had no dives,
entering dive site edit mode would place the map at the center
of the map, not at the location of the dive site.
Use the location of the dive site unless it has no location.
In that case use the map center.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of a dive field is only performed when focus
is removed from the field. On pressing CTRL-s, the changes
in the currently active field were therefore not saved.
Remove the focus from all fields to trigger an edit command
yand thus ensure that all changes are saved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole edit logic moved from displayed_dive to current_dive
and it became more and more tedious to keep these in sync.
Therefore, simply always display current_dive. The only exceptions
are the equipment tab and the planner, as these are not yet
integrated in the undo system. Once this is done, displayed_dive
can be removed.
Moreover, remove the clear parameter from updateDiveInfo().
Instead simply clear of there is no current_dive set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If a dive site was edited, the location field should be updated.
Do this by hooking into the diveSiteChanged signal of DiveListNotifier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of letting the user edit the fields before adding a dive,
simply add an empty dive. Thus, the ADD mode of the main tab can
be removed.
Constructing a new dive with default-depth and making sure that
the dive is displayed correctly is very subtle. This all needs
to be detangled in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Merging dive sites is currently only possible if dive sites are at
the exact same position.
Introduce a field where the user can enter a distance up to which all
dive sites should be listed. These can then be merged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter code is strange: it actually only checks the
dive->hidden_by_filter flag. Thus, before propagating the dive
changed signal, this flag has to be updated. Do this in the
DiveTripModel. Ultimately, this should be refactored.
Moreover, if the filter-flag changed notify the frontend
of a changed trip so that the trip is hidden / unhidden.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In tree-mode, the trip locations are displayed. Update the corresponding
entries if the trip changed, by hooking into the tripChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If fields in a trip are edited, select that trip, which will display
the trip in the notes-box.
This is realized by hooking into the tripChanged signal in the dive-list.
A layering-violation, perhaps?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
