Change connect for QAbstractButton::clickedto new syntax.
Change connect for QDialogButtonBox::accepted/rejected to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
correct SLOT was sec_bottomsac(double), which
is not reported as an error.
correct to set_bottomsac(double)
Signed-off-by: Jan Iversen <jan@casacondor.com>
QSignalMapper gives a warning that it is depreciated, and the
doc. states that using a lambda function is more efficient.
Replace use of QSignalMapper.
Signed-off-by: Jan Iversen <jan@casacondor.com>
QSignalMapper had a parameter convert problem, when mapping to
set_deco_mode in plannerShared.
Use lambda function in connect to avoid parameter convert problem.
Signed-off-by: Jan Iversen <jan@casacondor.com>
There were two cases that were handled incorrectly:
- if the user hasn't entered a salinity, obviously there shouldn't be a warning
- if this is a manually entered dive, there is no salinity downloaded from a
dive computer, so equally, no warning
Suggested-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to show this whenever the value in the dive (which could have been
entered by the user some other time) doesn't correspond to the value in the DC.
This, btw, will point out to the user if different DCs have different values.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were royally confused when we didn't know the salinity value (e.g., if the
dive computer didn't provide that information). We somehow treated this as the
same as wanting to use the salinity information in the dive computer. Which
makes no sense.
While cleaning this up, this also adds the textual representations of the water
types as a string list that corresponds to the enum values that we use - this
way it's easier to stay consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added code for string translation.
Added code to improve UI on Windows.
Added some comments to make the code more understandable.
Enable salinity combobox for manually entered dives
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may modify the salinity by selecting a water type from the combobox.
The new datum does not replace the existing salinity value but is stored in a
separate variable within the dive structure. If the dc-based salinity is
overwritten, there is an exclamation mark next to the modified salinity value
to indicate that the salinity has been overwritten. The dc-derived salinity can
always be recovered by selecting the "use dc" option in the combobox.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a checkbox in the Preferences: General screen that enables or disables
editing of the salinity data. This preference is saved with all the other
preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a cosmetic update to remove some warning messages
while building a fresh subsurface. These warnings were due to
duplicate label names in the .UI files.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Use plannerShared setter to update the variables in qPref.
This will also signal the cylindermodel to calculate a new bestmix.
variables:
bottompo2
decopo2
bestmixend
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use plannerShared setter to update o2narcotic. This will also signal
the cylindermodel to calculate a new bestmix.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
variables
bottomsac
decosac
problemsolvingtime
sacfactor
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
variables
min_switch_duration
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
and are read from plannerShared which includes a conversion
change signals to slots in plannerShared
change read from prefs. to plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
change local doo2breaks to plannerShared and update connect.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
variables
drop_stone_mode,
last_stop,
switch_at_req_stop
are not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
change local setBailout to plannerShared and update connect.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
planner_deco_mode is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
reserve_gas is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit does some final cleaning up to the code, mostly deleting
white space and comments.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a separate preferences tab for resetting all preferences to their default values.
One or two very small alterations to other sections of the preferences UI code.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a preferences tab for dive download, allowing resetting the
buttons representing download connections in the Download panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
change the settings variables using UNIT_FACTOR to use
plannerShared instead.
There are no changed functionality, it is simply removing calculations
from the UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The CMakeLists.txt referenced mapwidget which is in another root
directory (and also a seperate library)
Remove mapwidget reference from CMakeLists.txt
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use doUpload() from uploadDiveLogsDE
Connect signals from uploadDiveLogsDE to do UI part.
Clean slots to only contain UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Do not prepare zip file, just because user selected the divelogs.de
radiobutton
Move prepareDives to startUpload (slot handling user clicking on
upload button).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Clean prepareDivesForUpload() and uploadDives() so that
uploadDives() only contain network handling no UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use qPrefCloudStorage for divelogde_user/password to secure same
handling as other settings, as well as same handling as used in
shared uploadDiveLogsDE class
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove local implementation (prepare_dives_for_divelog) and call
uploadDiveLogsDE::prepareDives, which are shared between
mobile and desktop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove shared code from DiveShareExportDialog::doUpload()
and add call to uploadDiveShare::doUpload()
Remark signal handling is not implemented.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Diveshare upload in mobile is using qPrefCloudStorage, so change
diveshareexportdialog as well, to keep consistency.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The dive list accesses the filter model, therefore it makes sense
to also get the header data from there, even if they are only
forwarded from the source model.
This makes control flow more logical and will allow us to remove
the global DiveTripModel instance.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI talks to the filter model. Therefore route clearing of
data through that model instead of accessing the source model
directly.
This will allow us to remove the DiveTripModel::instance()
function and makes control flow less "jumpy".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The selection changes upon completing the filter are handled by
the core. Don't do this explicitly in the DiveListView.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changes to the weight model are not modal anymore, nobody
queries the changed-flag. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The WSInfoDelegate (weight-system-info delegate) is used to display
a combo box of known weightsystem-types and auto-fills the weight if
the weightsystem-type is changed.
This would overwrite the weight data of the displayed dive when the
user hovers over the different entries. Moreover, it saves the original
weight in case the user cancels the editing action.
This is not viable when implementing undo of weightsystem changes,
because hovering over entries should not produce individual undo
commands. Instead, implement a special "temporary" row in the
weightsystem model. On canceling of the edit actions, simply reload
the weightsystem from the unmodified dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is only one caller of WeightModel::weightSystemAt() and that
certainly does not need a pointer into the weightsystem-table of
the current dive. Return a value type instead of a pointer.
This allows us to mark WeightModel::weightSystemAt() as const and
use it from WeightModel::data(). Slightly cleaner code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When connecting a model to the TableModel class, it would connect
clicking on an item to the remove() slot of the model.
This breaks the program flow implied by the undo code:
Ui --> Undo-Command --> Model --> UI
Moreover, the naming of the remove() slot is illogical, because
clicks can also have different effects, as for example in the
cylinder-table.
Therefore, move the connect() call from TableModel to the
callers. In the case of TabDiveSite, move the remove() function
from the model to the TabWidget, where it makes more sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The WeightModel always acted on the displayed dive. To support undo
of weightsystem changes, operate on an arbitrary dive. This is
in line with other models, where the updateDive() function resets
the model to represent a certain dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The QList served as backing store for backupExpandedRows()
and restoreExpandedRows(). However, these always came in
pairs in the same scope. There is no reason to store the
expanded rows over a longer time.
Therefore, return the expanded rows from backupExpandedRows()
and take them as argument in restoreExpandedRows(). Morover
replace the QList<int> by the much lighter std::vector<int>.
We certainly don't need copy-on-write, reference-counting and
immutability of iterators in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calls of these functions were removed in the previous commits.
Now, remove the functions themselves.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code saved, cleared and restored the selection. This
is not necessary anymore, because on model reset the selection,
which is stored in the core, is reset. Remove the unnecessary
selection handling.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When accepting changes, the main tab refreshes the display in
a remember/restoreSelection() pair. Since the display refresh
doesn't lose selection, these calls can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old renumbering-dives code had to remember and restore the
selection. This became unnecessary with the undo-code. The
restore-call was removed, the remember-call left in. Remove it
as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView caught signals from the DiveTripModel
with the corresponding indexes. However, the DiveListView
is actually connected to the MultiFilterSortModel and
thus has to translate the indexes.
Instead, catch the signals in the MultiFilterSortModel,
transform them and resend. Let the DiveListView get
its signal from the MultiFilterSortModel.
Yes, this makes things less efficient because there is
an extra signal. On the upside, the makes data-flow much
more logical. Selection will have to be fixed anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to unify desktop and mobile by moving
selection code from the desktop-only view.
Currently, initialization of the selection still has to be
called from the view after connecting the appropriate signals.
This is due to the weird way in which create completely new
models when resetting them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView has a function to select the first dive. Move
this to the core to be able to call it from all parts (not only
desktop) of the code.
Currently, this has a (small?) UI regression: when filtering dives
and no selected dive is visible anymore, the old code would select
the first dive in the list. The new code selects the newest dive,
which might not be the first if some sort-criterion is active.
To revert to the old behavior, it will be necessary to move the
sorting function likewise to the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For deterministic construction/destruction (i.e. objects are
destructed in reverse order of construction) it is crucial that
constructor initializer lists follow the order of the class
definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, undo of dive-replanning was introduced. Therefore,
it appears logical to do the same thing for editing of the
profile of manually added dives.
For now, use the same undo-command, just change the displayed
text from "replan dive" to "edit profile". Move the fixup dive
call into the undo-command.
Eventually, every action on the profile should be made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement the UI features related to the additonal star widgets.
Create the additonal star widgets and connect them to the preferences settings.
By default only the current and visibility widgets are shown. In this case the
current widget is on the left hand side of the tab. If the additional widgets
are enabled the horizontal order of the widegts are changed to reflect
attributes roughly from the start of the dive on the left to those towards the
end of the dive on the right.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a preference setting on the General Settings page. The setting is saved
with the other preferences.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When selecting all dives via CTRL-A or manually and the trips
were not expanded, the QSelectionModel sends a single
selectionChanged signal per trip. We are reloading the map
in every call, making this very slow.
I couldn't figure out how to make QSelectionModel behave more
nicely, therefore I chose the nuclear option: Remove the map
reloading from selectionChanged() and hook into all functions
that do selection changes. In these functions, first call the
original code and then do the selection-changed operations.
This will certainly need some tuning.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function had only one line and had only one caller.
We might just as well fold that line into the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By clearing the model, its contents are removed. There is no
point in reloading the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The hidden_by_filter items are set on reload of the dive list.
No point in reloading the filter again.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove modification of style sheet for "Dive mode" box in info tab.
This fixes a broken UI layout under Windows.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Three minor changes in tab widget UI layout and txt:
- Remove leading space in string "Gas name"
- Remove duplicate <item> entry
- Correct "leftMargin" and "rightMargin" to 0 everywhere
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Introduce a DiveTripModelBase::clear() function that cleanly
clears all dive data inside a beginResetModel()/endResetModel()
pair. Thus, the UI will be cleanly reset and we can remove
explicit calls to
- graphics->setEmptyState()
- mainTab->clearTabs()
- mainTab->clearTabs()
- diveList->reload()
from MainWindow::closeCurrentFile().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>