Add a very simple tab-widget presenting the list of known dive sites.
The table is rendered using our custom "TableView".
The (mis)uses the "LocationInformationModel". It moves the items
to be displayed (delete, name, description, number of dives) to the
front and makes the others hidden.
Moreover, it was necessary to limit the geo-tag decoration role to
the name to avoid having the icon next to each column.
Make the trash-can icon active and the name and description editable.
This is modelled after the cylinders-table code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were a handfull instances of the kind
1) gettextFromC::instance()->tr(...)
2) gettextFromC::instance()->trGettext(...)
1) is pointless, as tr is a static function.
All instances of 2) were likewise pointless, because trGettext()
returns a C-string, which was then immediately converted to a
QString.
Thus, replace both constructs by gettextFromC::tr(...).
After this change there was only one user of gettextFromC::instance()
left, viz. the C-interface funtion trGettext(). Therefore, remove
gettextFromC::instance() and do all the caching / translating
directly in the global trGettext().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Change the strategy when to allow cylinder removal from a dive:
- Not remove when cylinder has gas switch events, in any other cases
allow removal
- Remove this whole "cylinder with same gas" thing being a criteria
for cylinder removal
When removing a cylinder which has corresponding pressure info in
samples, also remove this pressure info from the samples.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
There was a curious pattern of singletons being implemented based on
QScopedPointer<>s. This is an unnecessary level of indirection:
The lifetime of the smart pointer is the same as that of the
pointed-to object. Therefore, replace these pointers by the respective
objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Planning dives is heavy on CPU, so better be sure we only
do it when needed. In particular, when moving around dive
points, we only want a new plan once per move and not three
times (triggered at various points in the chain of events).
This should significantly improve planner snappiness.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When deleting a cylinder the mapping was not filled with all
necessary values. Values for cylinders before deleted cylinder were
missing.
Plus do the endRemoveRows at the right time.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the planner it is best practise to start the dive with the first
gas in the gaslist. Otherwise one would get a gaschange event at the
very beginning of a dive.
This change implements the following feature:
Automatically move a gas to position 0 in the gaslist if the user selects
this gas for the first dive data point.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the planner if one adds two or more cylinders with the same gasmix
(e.g. back gas and bottom stage 18/45) the drop down and data in the
used gas column of the planner points table will be filled with a more
verbose string mentioning also the cyl number and the cyl type
description.
Makes it easier in such a case to select the right cylinder.
Introduces also a helper function which tells you if there is another
cylinder with the same gasmix as the provided cylinder.
This also has an option if it should consider unused cylinders or not.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Be even more restrictive regarding which cylinders can be removed from
the cylinder table in the planner.
Only if a cyliner is not used in the planned part of the dive
it can be removed.
It doesn't matter if there is another cylinder with same gasmix.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is really unrelated to my recent "multiple gas pressures" work, but
the test case from Gaetan Bisson showed that the logic for which
cylinders to show in the equipment tab was less than optimal.
We basically used to show only cylinders that were actively used, unless
you had the "display_unused_tanks" preference option set. That comes
from some dive computers reporting a *lot* of cylinders that the diver
really doesn't even have with him on the dive. And showing those extra
dummy cylinders gets pretty annoying after a time, which is why we
default to not showing unused tanks.
However, in Gaetan's case, he had a total of four cylinders on the dive:
the O2 and diluent bottle for the rebreather dive, and then bailout
bottles (both air and deco). And while the bailout bottles weren't
actually used, Gaetan had actually filled in all the pressure details
etc for them, and so you'd really expect them to show up. These were
*not* just some extraneous default cylinder filled in by an over-eager
dive computer.
But because the bailout wasn't used, the manual pressures at the end
were the same as at the beginning, and the "unused cylinder" logic
triggered anyway.
So tweak the logic a bit, and say that you show cylinder equipment not
only if it has been used on the dive, but also if it has any pressure
information for it.
So the o nly cylinders we don't show are the ones that really have no
interesting information at all, except for possibly the cylinder tank
type itself (which is exactly what the over-eager dive computer case
might fill in, usually in the form of a default cylinder type).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Second attempt to do the thing with the red background color for cylinder
start and end pressure correctly. This now should cover all scenarios.
This rewrites and partitially reverts commit b8e044d
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Display the correct trash or trashforbidden icon and tooltip in the cylinder table.
This should fit together with if it is really possible to remove a cylinder.
Search for "same gas" based on used cylinders only. Otherwise one could remove
a used cylinder because there is an unused cylinder with same gas.
ToDo:
In planner update trash icon on change of planner points.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the cylinder table today the cylinder start and end pressure fields
are marked red and the end pressure font is set to italic if cyl->end is 0.
But sometimes with planned dives there is no cyl->end but only cyl->sample_end.
This is taken into account now.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.
This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This reverts commit adaeb506b7.
commit a8e8d56ec0 ("Tweak cylinder equipment tooltips") does a much
better job allowing the user to know the true volume of the cylinder
(given the gas entered) and clutters the UI a lot less.
While playing around with the current subsurface, I realized that while we
give the gas volume and Z factor for the beginning/end pressures in the
newly added tooltips, there is no way to actually see that same
information for the working pressure.
So if you have filled in cylinder type information, but don't have any
actual gas usage information, there will be no cylinder tooltips at all.
But you might still want to know what the actual volume for a particular
cylinder is, and what the Z value for that working pressure is.
So this tweaks the tool-tips a bit.
When mousing over the pressure fields (ie "working pressure", "start" and
"end"), it now always gives the cylinder gas volume and Z factor for that
pressure, so for example on an AL72 that has a working pressure of 3000
psi and that contains air the tooltip will say:
69 cuft, Z=1.040
when you mouse over the working pressure field (that's obviously with
imperial units, in metric you'll see liters of gas).
When mousing over the type/size field, it gives the used gas amounts, ie
something like this:
37 cuft (82 cuft -> 45 cuft)
but if the cylinder doesn't have starting/ending pressures (and thus no
used gas information), this patch will make subsurface show the working
pressure data instead, so that you at least get something.
This all seems more useful than what my first version gave.
NOTE! This makes commit adaeb506b7 ("Show both the nominal and "real"
size for an imperial cylinder") kind of pointless. You now see the real
size in the tooltip when you mouse over the size, and now it actually
works both for imperial and metric people, so the tooltip is in many ways
the better model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds tooltips for the equipment tab for each cylinder, showing the
amount of gas used.
When you mouse over the size and working pressure fields, the tooltip will
show the amount of gas used (along with start and end gas volumes). And
when you mouse over the start and end pressures, it will show the start
and end gas volumes, and the Z factor used.
I started doing this because of the gas volume questions in the last day
or two (and a few from a few weeks ago). When even Robert Helling starts
wondering about the effects of compressibility on the SAC calculation, our
numbers are clearly too opaque.
With these tooltips, at least you can see what went into the used gas
calculations, instead of having to add debugging options to print out Z
factors.
[ This patch also adds a "rint()" to get the rounding right in the
gas_volume() function. Although rounding to the nearst milliliter
really doesn't matter, it's the right thing to do after doing FP
calculations ;^]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b1ed04a means that DivePlannerPointsModel::rememberTanks() and related
functions and variables are no longer required
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option to calculate the best mix portion of O2 and He for the dive's max
depth if the user enters * in the MOD and MND cylinder fields. Gas portions
are automatically recalculated if the max depth of the dive changes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switch depth of a decompression gas is its MOD. By renaming the heading to
"Deco MOD", it is more clearly distinguished from the bottom MOD, and it is
more obvious how they relate to the Bottom pO2 and Deco pO2 preferences.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds fields to the planner cylinder model for maximum operating depth (MOD)
for a bottom mix gas, and maximum narcotic depth (MND). Fields are read/write,
so changing MOD changes %O2 and vice-versa. Changing MND changes %He and
vice-versa.
When setting MOD directly, the %O2 is truncated (rounded down) to an integer,
which re-calculates the MOD, which is sometimes a few metres greater than the
input depth. This is desireable behaviour, as the rounding is conservative.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fix is reasonably straightforward when the divedatapoint structure stores
the cylinder rather than gasmix.
Fixes#970
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A few basic rules for gas validation:
We can't have <0%, or >100% of either O2 or He
O2 + He must not be >100%
Switch depth can't be <0%
This places limits on user-input values
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows calculation and selection of best mix in the planner cylinder
entry, by entering the gas depth, followed by "b" for best (trimix) mix, or
"bn" for best nitrox mix.
The UI is not intuitive, but it is quick and easy. At the very least, it
should be documented.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the value for "use" is negative or larger than the number of
elements in "enum cylinderuse", later CylindersModel::data() can
request a string in the lines of cylinderuse_text[cyl->cylinder_use],
which can SIGSEGV.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is questionable, but perhaps useful.
When showing imperial cylinder sizes, show both the nominal value (with
no compensation for compressibility of the gas) and the "actual" amount
of gas the cylinder contains.
So an AL80 will show as a size of "80 (77)cuft", because while 80 is the
nominal size, the actual amount of gas that will fit is just 77 cuft.
[Dirk Hohndel: adjusted to take translation of the unit into account]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had two totally different usage cases for "get_volume_string()": one
that did the obvious "show this volume as a string", and one that tried
to show a cylinder size.
The function used a magic third argument (the working pressure of the
cylinder) to distinguish between the two cases, but it still got it
wrong.
A metric cylinder doesn't necessarily have a working pressure at all,
and the size is a wet size in liters. We'd pass in zero as the working
pressure, and if the volume units were set to cubic feet, the logic in
"get_volume_string()" would happily convert the metric wet size into the
wet size in cubic feet.
But that's completely wrong. An imperial cylinder size simply isn't a
wet size. If you don't have a working pressure, you cannot convert the
cylinder size to cubic feet. End of story.
So instead of having "get_volume_string()" have magical behavior
depending on working pressure, and getting it wrong anyway, just make
get_volume_string do a pure volume conversion, and create a whole new
function for showing the size of a cylinder.
Now, if the cylinder doesn't have a working pressure, we just show the
metric size, even if the user had asked for cubic feet.
[Dirk Hohndel: added call to translation functions for the units]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding { } to if clause to avoid dangling warning
/Users/guidolerch/src/subsurface/qt-models/cylindermodel.cpp:117:
warning: add explicit braces to avoid dangling else [-Wdangling-else]
[Dirk Hohndel: combined two of Guido's patches to one that is simpler]
Signed-off-by: Guido Lerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there is only one gasmix in the list we should show the icon that tells the
user that they can't remove the last gasmix from the list.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the proper calculation, we need to take salinity and surface pressure
into account (rather than depth = bar * 10 - 10)
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we remove a cylidner for a unique gas and that is allowable, then don't
try to copy from cylinder with index same_gas (which is still -1).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another change to make it easier to program the mobile ui. This was a
fairly easy patch: just moved the contents of the file and fixed the
includes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
