The gas change context menu was filled from the CylindersModel.
This means that even before saving new cylinders, the user could
add a gas change event to these cylinders.
Instead, fill from the current dive.
Fixes#2552.
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a gas change event via a context menu, the gas-id and
timestamp were passed in two distinct ways.
1) The gas id was extracted from the text of the action. This meant
doing rather complicated parsing.
2) The timestamp was passed via the "user data" of the action, which
means transporting via "QVariant".
There is a much simpler way to pass arbitrary data, that is strongly
typed: lambdas. Instead of shoehorning the data onto the action in
an archaic way, we can simply connect to a stateful lambda. That's
what they're for after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It shouldn't happen, but currently we overwrite the displayed_dive
without updating the CylindersModel. Thus, CylindersModel may now
crash when the new displayed_dive has less cylinders than the old
one.
For now, catch this condition. Treat the root cause later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Emit signals for each standard color when theme changes.
The iconStyle property was changed from being a constant, because it can
change, and thus a signal was added.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove extra empty lines in themeinterface.cpp just a cleanup, no functionality
change.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
fontMetrics is no longer used in production code, but still in the theme test
page.
Isolate fontMetrics in ThemeTest page.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to remove fontMetrics from QML, replace references (height)
in DownloadFromDiveComputer and Settings
Add include kirigami as needed
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move setting of font properties used throughout to themeInterface.
Add new settings "currentScale".
The properties are kept in main (subsurfaceTheme) in order not to do
a big search/replace.
Update settings to use currectScale and signal changes in themeinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Check defaultfont and calculate basepointsize in themeinterface instead
of in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were quite a few issues with the code - clearly a complete failure of
code review.
- all values were '??' if a period contained no dives
- imperial units were not calculated at all
- significant truncation and data loss in the way totals were added as meters
and minutes instead of the higher precision data that is available
- several issues in striing conversion methodology, e.g. missing zero padding
for minutes
- missing maxSac
- incorrectly calculated avgSac
- incorrectly claculated number of EANx dives
- hard to read code with most variables named 'temp'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Solve kirigami error:
INFO: qrc:/org/kde/kirigami/ScrollablePage.qml:187: TypeError: Cannot assign to read-only property "parent".
Kirigami.scrollPage does not allow a ListModel be defined, even though it is allowed in QtQuick.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add dive_move variable to qmlinterface, to make it aviable to QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We never noticed this before, but during the build of the Trusty Qt5.12
container itself we create libdivecomputer include files and we ship them with
the container. And as the recent build failures after an incompatible API
change in libdivecomputer show, those include files are apparently used in this
build, not the ones that are newly created during the build.
Obviously the build container needs to be fixed, but as a quick workaround,
this should do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace subsurfaceTheme with ThemeNew, since there are still 2 objects
subsurfaceTheme in main.qml and ThemeNew in themeinterface.*
Replace theme color references with ThemeNew, as they are no longer available
in main.qml (subsurfaceTheme).
Signed-off-by: jan Iversen <jan@casacondor.com>
Move setup call and registration from subsurface-helper
to themeInterface, in order to keep the registration where the code
are.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add DivePlannerSummary, a page to show in dive centers.
Allow user to select period for the 2 colums in DiveSummary.
Default is "Total" and "3 month", but allowing the user to change
these, make it a very simple tool to view how the user progresses.
Variables are taken from Backend.
[Dirk Hohndel: adjusted text strings as these aren't really months]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create DiveSummary class in backend-shared and make the DiveSummary calculation
results available to QML.
This adds a loop over all dives (could have been done with a model, but the
models available to mobile are very limited, so use the basic way).
[Dirk Hohndel: renamed the results variable and combined a couple of commits]
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property "colorBackground" to allow instances of templateLabel to have
background color overwritten.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Windows had it's own direct socket implementation for rfcomm (ie legacy
BT), while all the other platforms used QtBluetooth.
This makes Windows do the same thing. Hopefully modern Qt libraries now
work well enough on the Windows platform for this to work, but I can't
test it.
We can make a test build that Windows people can try, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jef has changed the libdivecomputer iostream layer and extended it in
two different ways:
- iostram's now have a 'poll()' method, which does what the name
implies: waits for data to be available with a timeout.
- iostreams now have a 'ioctl()' method, which can be used to implement
miscellaneous operations. Right now the two ones that you can do are
"set latency" (this replaces the old 'set_latency()' method) and "get
BLE name" (this replaces our 'get_name()' method that was never part
of the upstream libdivecomputer interfaces)
Neither of these is all that complicated, and the transition is fairly
obvious.
HOWEVER.
I have absolutely no idea how to do 'poll()' on Windows sockets, and I
have no intention of figuring it out. We use a direct socket interface
to implement the (non-BLE) RFCOMM bluetooth serial protocol, and I'm not
sure why Windows is so special here. I suspect - but cannot test - that
we should just switch the Windows RFCOMM implementation over to the use
the same QtBluetooth code that we use on other platforms.
I assume that the Windows Bluetooth support was originally not
sufficiently good for that, but these days we depend on Qt doing BLE for
us even on Windows, so presumably FRCOMM works too.
That would be a nice cleanup, and would make 'poll()' work on RFCOMM
under Windows too. However, since I can't test it, I've not done that,
but instead just made the Windows RFCOMM 'poll()' method always return
success. That may or may not get the thing limping along.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A lot of whitespace issues have snuck in recently, this just cleans those up so
that I don't need to hand-edit patches every time I touch this file (since
QtCreator automatically fixes whitespace when I make changes).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update Settings to use ThemeNew (for theme change)
Reduce subsurfaceTheme in main
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register themeInterface with a temporary name, which allows it to be integrated
in subsurfaceTheme (main.qml).
Once all of subsurfaceTheme (main.qml) is available in themeInterface, the name
will be changed.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently subsurfaceTheme resides in main.qml, where it does not naturally
belong.
Add C++ class that will replace subsurfaceTheme in main.qml in a 1-1 manner.
This opens future posibilities
- on top of the 3 themes, allow users to select colors/fonts
- add stylesheets to Template* components
- make day/night shift automatically.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought I had it fixed, but we still see a ridiculous number
of random, unexplained failures which distract from what we are
trying to do with the GitHub Actions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Provide text and 12 images to describe the preference system
for Subsurface. Several within-document links updated.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Replace 11 images in the user manual to reflect latest changes
in the UI (Notes tab, Equipment tab, Information tab).
Change text in user manual.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove comment that was very false (next line contradicted the comment).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove Q_PROPERTY and signals from plannershared, since they are
no longer used (transferred to qmlinterface).
Unregister object plannershared, since it is no longer used in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update size and colors.
Changing the TemplateSection, automatically changes all sections
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The standard SpinBox uses far too much real estate.
The new SpinBox have a smaller footprint, and more visual effect.
Changing the TemplateSpinBox, automatically changes all spinboxes
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property pressureUnit to use as BAR/PSI text.
Added slot to catch when user changes BAR <-> PSI.
Add Backend variables to Planning section.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
Duplicate deco_mode to DECO_MODE, in order to make it available to QML.
Duplicate enum divemode_t to DIVE_MODE in order to make it
available to QML. Only part of the enum is made available.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add bottompo2, decopo2 and bestmixend to QMLInterface
Bestmixend in gas options changing with
meter/feet
Signed-off-by: jan Iversen <jan@casacondor.com>
