In the code, the difference between SALTYWATER and SALTWATER is hard
to see. More importantly, in the UI - Brackish is the word for water
that has more salt that freshwater but less salt that seawater. The
docs already use the word to clarify what is meant.
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
There was a TestProfile but that was a stub that did not test anything.
We have an export function that serialises the profile data
(including lots of derived data like deco information and
cylinder pressure interpolation). So here is now a simple
tests that can detect regressions in the profle.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
As the heading above says. two images changed.
Short table of contents added.
Add section on dive trip editing and dive list structure.
Added links to video tutorials.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Net net this has caused more problems than it solved. Too often binaries
were missing or broken. Instead 'release equivalent' binaries are now
consistently posted to downloads/test via a Webhook.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When printing, the dive plan was prepended with a logo, a disclaimer
and the profile. Then it was restored by setting the plan of
displayed_dive.
Instead, simply save the original plan in a QString and restore that.
This removes a further dependency on displayed_dive, which I'd like
to make local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the planner the undo commands for adding / editing dives were
only called if not on mobile. This is from days were mobile didn't
have undo commands. We can remove these now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainWindow::editCurrentDive() used to be a general function to enter
edit mode. Nowadays, this is only called for one very specific case,
namely editing the profile of a manually added dive. Therefore, we
can remove the if-branch that dealt with planned dives.
Moreover, we can do the test right at the beginning and remove
a warning message for duplicate "edition", as this is not
possible anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one caller of MainWindow::setupForAddAndPlan() left
and that caller immediately called DivePlannerPointsModel::createSimpleDive().
Thus, we might just as fold the former in the latter and thus
concentrate all the prepare-dive-for-plan business in one place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the MainWindow doesn't have to extract the plan from
displayed_dive. This is a tiny step in an attempt to detangle
the interfaces. The bigger goal will be to make displayed_dive
local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating variations, they were sent to the mainwindow,
which updated displayed_dive accordingly. Do this directly
in the planner-model.
The idea is to detangle interdependencies and to make the
code reusable (planner on mobile?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to dives add a selection flag for trips. The reason
being that search for a selected trip can be painfully slow when
we do it through Qt's proxy model.
Make sure to deselect trips when they are removed from the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no current dive, mainTab->updateDiveInfo() implicitly
clears the tabs. There is no need to call this explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
ProfileWidget2::plotDive() had this weird interface, where passing
in NULL as dive would mean "show current_dive". However, most callers
would already pass in current_dive. Therefore, unify and always pass
in current_dive if the caller wants to draw the current dive.
This allows us to interpret NULL as "show empty profile". Thus,
passing in current_dive when there is no current_dive simply shows
an empty profile. This makes the calling code in
MainWindow::selectionChanged() simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a mix of ProfileWidget2::replot() and
ProfileWidget2::plotDive(current_dive, true), which is equivalent.
Since there was more of the latter and it is more flexible, unify on
that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Firstly, the parameter appears conceptually wrong, as replot suggests
that the currently shown dive is replot. Secondly, the only caller that
passed a parameter was passing in current_dive, which is just what happens
if one doesn't pass a parameter. Therefore, change that caller (call
plotDive directly) and remove the parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used to cancel a plan (or profile edit) when the user quit
the application while planning. This is inconsistent with
respect to closing or opening a different log, where the user
was asked for confirmation.
Thus, for consistency and to avoid loss of a planned dive,
use the okToClose() function in on_actionClose_triggered() of
MainWindow. As an added bonus, this saves a few SLOC.
Fixes#1078
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is needed to be able to push new betas into the AppStores.
I keep forgetting to do that after I do a mobile release.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are all kinda weird but I use them when creating releases, so it
seems to make sense to add them to the repo. I don't think they are
useful to anyone but me, but in the event someone else takes over, they
might be a useful starting point.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tweaks the language about where to find the latest binaries,
as some of them are also under downloads/test and in the OBS repos.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In 2021035cfc a bug was introduced:
currentTrip of MainTab was not set in trip mode. Thus, when editing
the trip notes, the notes of all selected dives were edited instead.
Set the member variable and not a local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When populating the events of a profile, a pointer to the current
gasmix was passed around to properly calculate isobaric_counterdiffusion.
The DiveEventItem::setupToolTipString() function updated this gasmix
when processing gas change events.
I inadvertently broke the code when replacing gasmix-pointers by
values. We could of course simply revert this part of the commit.
However, the data flow was horrible anyway: for example is supposed
that the setup functions were called in the correct order (i.e.
DiveEventItem::setupToolTipString() is called after all other
functions using the gasmix). Not exactly easy to follow.
Therefore, keep passing around the gasmix as value to make it clear
that the functions don't modify it. Keep the gasmix up-to-date at
the caller's site in ProfileWidget2::plotDive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This included QFile, which is fatter and not needed here. Include
QFile only in the actual translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There appears to be no reason to slurp in all dive.h when compiling
membuffer.c. units.h might not seem like the perfect place, but it
is the most fitting I found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency: declare enumerate_dives as extern, since we do that
for all other C-functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No external caller of this function exists. Moreover, turn the return
type to void, as it only returned the passed-in plot_info and no
caller used that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It make debugging much easier if the function signature tells you
that a parameter is not altered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
