From DiveList section to printing section
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was originally triggered by an odd merge of two dives that should
have been the same, but that showed a corner case where the plot entry
creation could create broken results that violated our assumptions about
time stamps being monotonous.
When setting up the plot entries we create surface entries at the
beginning and end. We then fill in the plot entries between them based on
the samples from the dive computer plus our own interpolation (so we have
one entry at least every ten seconds). The loop ends when we are out of
space - which in this instance caused us to exit before updating the
maxtime and therefore the final plot entries having time stamps that were
smaller than the last entry filled in by the inner loop.
This patch makes sure we have enough space in the plot entry structure and
moves the exit from the inner loop until after we have updated the
maxtime.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not quite sure why this works, but it appears to do the trick.
Apparently you are supposed not to have the meta type declaration in a
shared header file. Also, with Qt5.5 you can't have the declaration for
QBluetoothDeviceInfo, not even on Windows.
This may need more tweaking to make sure it works on all combinations of
OS and Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a user gets stuck accessing cloud storage it's often hard to figure out
which step is hanging which makes it much harder to narrow down the
problem. With this patch calling Subsurface with '-v' will give somewhat
finely grained progress information on stderr.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If Subsurface is started with the verbose flag, also give progress
information on the consol (just in case there are issues with the progress
dialog).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the cloud URL to the file select box leaves "git syntax" in the
filename which makes us look for a directory with a git repository in it
and give non-sensical error messages to the user.
With this we simply use the users email address as local filename with a
.ssrf suffix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not want to remember max_bottom_ceiling_pressure from the previous planned
dive - it makes the Boyle's law compensation incorrect if the previous planned
dive was a deeper deep-to-shallow multi-level dive.
E.g. Plan these dives (without applying this patch) with VPM-B nominal
conservatism:
Plan 30 m for 20 min (total run time = 28 min)
Now plan 100 m for 20 min, followed by 70 m @ 23 min and 70 m at 30 min
Re-plan 30 m for 20 min (total run time = 50 min)
With this change, the re-planned dive run time is 28 min, as it should be.
We probably don't have to reset first_ceiling_pressure too, but it's cleaner if
we do.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't do this expensive calculation when not needed.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The data are supposed to be sorted with monotonous time stamp. And while
the actual bug that causes this needs to be identified and fixed, this is
at least a stop gap measure that shows the issue and prevents Subsurface
from hanging.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic to pick the initial dive ID for the uemis downloader was very
confused, and did not work at all when restarting a download when the
Uemis filled up, and the "Force download all dives" flag was set. It
also required a rather odd Uemis-specific callback from the download UI
because of how it picked the initial ID.
This changes the logic to just look at the list of downloaded dives when
restarting, which simplifies the logic a lot, gets rid of the odd
special callback, and also means that the whole "Force download" issue
just goes away. It seems to work now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Uemis downloader blindly just did a strstr on 'nds->name', even if
there wasn't necessarily a dive location at all.
Add the proper NULL pointer checks.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some Windows platforms when we convert a Bth address to a String
it is formatted as "(XX:XX:XX:XX:XX:XX)". Therefore we first try to
remove the round parentheses and finally we truncate the string
to 17 because there are 6 two-digit hex values and 5 colons.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't overwrite existing data.
[Dirk Hohndel: rewrote this a litte, but the logic is the same]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changing the logic to check if a divespot was already read in
this round of reading in dives.
Signed-off-by: Guido Lerch <glerch@Guidos-MacBook-Air.local>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hate this patch. But it makes no sense to expose users to git level
error messages. So this is trying to make things much easier (and,
frankly, less informative) if we are accessing the Subsurface cloud.
The way this is implemented is really ugly; it tries to avoid frequent
repetition of the same strings by using different exit points for the
functions in question. I'm not convinced this was the best way to do it
but it's what I have.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spell Setpoint without space in user visable strings.
Explain authorized_paired.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Up to now, we only computed hashes of images upon actually displaying the images.
With this patch we start to compute hashes once we load the xml or from git. This
happens in the background, so the user should note an increased CPU load only once
per divelog.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implemented suggestion from Dirk on how to deal with dive details
not being found.
Also cleaned up some unused variables, got rid of the last_log_file_nr
because it's not needed anymore.
One thing in question I still need to check is whether we really need to
decrease the dive_to_read if we find deleted dive details, this is still
in but I dont think it's really needed.
Signed-off-by: glerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now inplace edit is supported, so enable editing the "Default"
statistics template, Also show warning when editing this template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a bundled template show warning message.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Edit the templates into the same file, which is more intuitive as
Custom.html is a bit confusing.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The next gradient calculation at the start of the CVA loop should be performed
using the tissue loading before starting the iterations, rather than the loading
at the end of the previous iteration.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Other VPM-B implementations (V-Planner, MultiDeco, Fortran code) take the
default gradient of onset of impermeability as 8.2 atm. We use bar as the
pressure unit, and 8.2 atm = 8.30865 bar.
This has negligible effect on all of the calculated plans I've tested, resulting
in a maximum decrease of 1 minute in total dive time for ~150 m deep dives, but
we should get unit conversions correct anyway.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current way that facebook works is terrible: it's scattered
around tons of files ( at least 4 different files and classes )
this moves things around a bit, add a disconnect button that
was missing, cleans tons of code and fix inconsistencies.
I will also redo this part for 5.0, but it's too late for 4.5
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also modified user-manual_fr.txt.
Russian and spanish translations didn't have any occurrence of Buehlmann
nor Buhlmann.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unify spelling of this name in strings shown to the user, as commented
in mailing list. Internal coding use untouched.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Systematic review of existing text (part 1)
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixed a bug where the import did not react on the cancel button by adding
the check into the helper function as well.
Signed-off-by: glerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New calculation doing better UEMIS memory handling leading into more
dives being loaded at the same time while assuring we are not overrunning
the memory.
Also added the dialog message back, this was actually a bug I missed
introduced in one of the earlier patches
Signed-off-by: glerch <guido.lerch@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
