I we are showing a calculated ceiling, then we have to replot the profile
after a preferences change as the gradient factors could have changed
which might change a calculated ceiling.
Also use the rulergraph preference instead of checking the settings
directly.
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QVariant does the right thing, regardless of whether the value is stored
as int or as string - so let's just use that instead of manually checking
for integers (and failing if the values are stored as "true" and "false").
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After receiving another report of the Uemis downloader failing I tried to
make it more robust when unexpected things happen. The data structures
returned by the SDA are rather convoluted and not all relationships are
fully understood.
This makes sure we don't try to parse invalid dive entries, we only read
dive entries if we actually got new divelog entries, we only read dive
sites if at least one was referenced and we use a much more patient (and
hopefully, much more robust) algorithm to figure out which dive entry
corresponds to the new divelog entries.
What a pain.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit bcdd6192fe ("Show translated event names in tooltip") I was
too aggressive in replacing the checking for event names with checking for
event types. It turns out that we are abusing an existing event type in
the planner (and use a different event name to mark the difference). By
just checking for the type this now caused incorrect information to be
displayed in the info box (a simply "PO2 warning" on a Suunto D9 could
turn into a "Bailing out to OC" notice).
The correct fix is to get our own range of SAMPLE_EVENT_xxx numbers from
libdivecomputer. Once we have those, we can do this the right way. For now
we just fall back to also checking the event name (which is what I wanted
to get away from so translated names don't trip us up).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Document the new "add" menu capabilities, partially as there are features still not
functional.
Documents the new feature with GPX files imports.
Corrects a typo.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This speeds up Aquadivelog imports marginally by doing lookup to used
equipments only instead of all equipment ever used.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 7f3b487c77 ("Restore the previous globe zoom level after
showing dive without GPS") I was a bit too aggressive in replacing a
deprecated API function - people still need to be able to compile against
Marble versions older than 4.10.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Writing the samples/waypoints to UDDF export in a totally new way.
Previously the preparations for approximating waypoints was done for
every sample, now only for the events.
A few days ago it took 36 seconds for my test set of 8 dives to export
to UDDF. This optimization round took it down from 0m4.745s to
0m0.253s.
Fixes#508
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user changes the coordinates for a dive but then cancels the dive
edit, the globe would stay at the location that was temporarily set and
not rotate back to the still active coordinates.
This fixes it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this only happens on Windows, but there we would change the
dive coordinates on a SINGLE click when editing a dive. With this change
we simply bail if the event isn't a double click.
Fixes#505
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a trip is selected (or for other reasons more than one dive), this
would change the GPS coordinates of the whole selection which almost
certainly isn't what the user wanted.
Instead, only allow changes of the coordinates on the globe if exactly one
dive is selected.
[Dirk Hohndel: massively rewritten and extended - but I didn't want to
simply "steal" the commit from Tomaz...
This now maintains the "zoom out mode" for dives without
GPS coordinates and deals with edits of multiple dives that
are initiated the "normal way" by starting to edit other
data as well.]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thanks to commit 83c5ab5871 ("Zoom out when dive has no coords.") we
show more of the globe when displaying dives without GPS data - but that
caused us to forget the zoom level we used before and so the experience
when switching back to a dive with GPS data was disappointing.
This makes sure we track the last valid zoom level and restore it when
needed.
I also replaced the deprecated zoomView() calls with setZoom() calls.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mouse activity on the globe should not select dives when one or more dives
are being edited. This improves the detection of that state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the globe zoom out to show it complete when
the dive has no coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
How strange. Telling Qt4 to assume that all C strings are Utf8 apparently
isn't enough to convince tr() that the C strings we pass to it are Utf8.
You need to set that codec separately.
Fixes#503
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our workaround for the lack of a US-English translation breaks en-GB. With
this the British version of Subsurface should work as well.
Reported-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Duration is better term than time for the length of the dive. Also
remove the repetitive word dive from some of the header fields.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mention the option to export in CSV format in our user manual.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "is_air()" test works when we have the gases in permille, but not in
percent. In that case we can just check for He == 0 and O2 == 21.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for this to work we need to compare against the event type
instead of the event name - which makes much more sense to do, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Add hyperlinks to references to Appendices A and B in the text
- Be consistent with use of numbered lists and bullets:
-- Use numbered lists where order is important (e.g. a set of instructions)
-- Use bullets where isn't doesn't matter (e.g. a list of features)
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor update of manual for consistency in terminology and improved style
including the section describing the companion app. No images were affected.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF export used all samples in the export when detecting previous
sample. This resulted in a very slow processing as we had to go through
massive amount of data for each event that's time was to be
approximated. The detection of previous sample was also erroneous
resulting in incorrect depth samples for the events in some occasions.
This patch should address these issues. And along with patch that
included pressure data on import this will fix the bug #499.
Well, the performance after the patch is still not stellar, but still
quite a difference with such a small change. The sample set of 8 dives
(with one event each) takes now less than 5 seconds instead of the
original 36 seconds (measured by doing the conversion with xsltproc).
Fixes#499
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes minimum pressure from manually added cylinders to be taken
into account on scaling. Without this, manually added cylinders might
lead to pressure dropping below the Y axis 0 line (e.g. when first
"computerized" cylinder is 220->140 and second, manually added cylinder,
200->50 bar).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The behavior at startup is actually very annoying: we select the latest
dive, and expand the trip it is in, but since we use "scrollTo()" on
just the dive, and it's not initially visible, the startup will make the
first dive be at the top of the list view.
Which means that the actual _trip_ detail is not visible at all, since
it will have been scrolled off the list view entirely.
Fix this by first scrolling to the trip, and only then scrolling to the
actual dive (using the default "EnsureVisible" policy). Obviously, if
it's a trip with lots of dives, scrolling to the dive may end up
scrolling away from the trip header again, but at least that never
happens at startup, and at that point you have to scroll away from the
trip just to show the dive.
Do this same dance when changing the dive selection (mainly noticeable
when picking dives on the globe view).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having all the grid lines in the same color made things visually
confusing. To clean this up a little make the heartrate lines a light gray
color.
Fixes#484
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the location string we try to be smart and automatically add
the correct coordinates (assuming we have a location of this name already
in the dive list). So if you return to the same dive spot you'll get the
correct coordinates by default. But this creates bogus result if we allow
an empty location to be matched, as it makes no sense to assume that all
dives without a location name were at the same coordinates.
Fixes#498
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of just having "Created by subsurface <version>", put the number
of dives and the location of the last dive in the message. That makes
things like "gitk" show a much more useful view of what actually got
saved.
We still save the subsurface version in the body of the message, because
that is interesting and relevant information. It's just not the
*primary* relevant information.
Anyway, with this, a git commit message might looke something like
dive 474: North West Point (Christmas Island)
Created by subsurface 4.0.96-17-g649e9ed89d9d
which is much more relevant for the common case of adding new dives at
the end.
Of course, if the reason for the save is that you edited old dives, the
relevance of the commit message telling you the number of dives you have
in the log and the dive number is questionable. But then you have to
look at the actual diff to see what's going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Importing pressure samples on UDDF import was missing. This patch adds
that bit of information to our import.
See #499
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They happen - maybe the cylinder actually warmed up, or maybe the user
entered just a ending pressure without a starting pressure. Regardless,
just ignore cylinder pressure changes that go up.
Also ignore cylinders with a zero ending pressure: that's really a
*missing* pressure rather than an actual zero pressure. As Dirk says,
the scuba regulators don't even work without a healthy positive pressure
differential, so even when you breathe down a tank to "empty", it won't
be at zero pressure (this is true even with gauge pressure, where zero
means "atmospheric pressure").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DateTimeOriginal should be used as first option when loading images.
When images are modified, the original time should be retained, but the
DateTime will change to the edit time.
See #495
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds option to export selected dives into a CSV file to the right
click menu on dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's make the export consistent by quoting the header line the same way
the sample rows are quoted.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When exporting UDDF logs the file name selection dialog should talk
about export, not save. This patch changes that text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>