This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Currently, the path to the recently used file is stored in the tooltip
of the corresponding recent file action. Instead, store the number
of the recent file in the action. This allows for more flexibility
concerning formating of the tooltips (think git repositories, etc.).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using four recent files actions defined in mainwindow.ui,
generate these actions dynamically depending on the macro NUM_RECENT_FILES.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The file mainwindow.cpp is only compiled for desktop versions, so the
condition is redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing the QSession object down, simply create it in
MainWindow::checkSurvey()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code used to be unnecessarily complex: the recent files list
was extended for each file and shrunk if a load failed.
By adding a file to the recent file list only if the load succeeded, a
whole method could be removed.
Other changes: keep track of the recent files using a QStringList and
clearly separate the actions:
- Read recent files from settings [loadRecentFiles()]
- Write recent files to settings [updateRecentFiles()]
- Update the recent files actions in the menu [updateRecentFilesMenu()]
- Add a file to the list of recent files [addRecentFile()]
With this reorganization the code hopefully became more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
reset_cylinder may transform unused cylinders into zombie cylinders
inside the planner because it adds a depth info and therefore the
planner will use them.
By calling CylindersModel->updateDive these cylinders will become visible
and can be deleted by the user.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Since commit 01d961086c, MainWindow::refreshDisplay()
is called in the refreshDiveInfo() signal of maintab after editing a
dive site. Since this was the only use of the refreshDiveInfo signal,
remove this signal and instead connect to MainWindow::refreshDisplay directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Update the filters if the list of dives is updated by calling
MultiFilterSortModel::instance()->myInvalidate();
This had the side effect of clearing all selections. Thus, in
the repopulate() methods of the FilterModels, check those
entries that were checked previously. Since all the filter
models use the same code, introduce a base class FilterModelBase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This update includes:
- Instead of copyPath() use a new specialized function:
copy_bundled_templates()
- The new function supports overwriting of templates
in the user path, but only if a template file is read-only
- If the file is RW create a backup of the file in the
form of: <file-name>-User.html
- Collect backup files and store them in a QStringList
which is then shown in a QMessageBox from MainWindow
to notifying the user about the backup
This change allows moving the maintenance of the bundled
templates back to the application developers and contributors
as currently the only one who can edit the templates in the user
path was the user.
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the function set_bundled_templates_as_read_only()
in templatelayout.cpp/h. The function is used to
mark the bundled template files as read-only in
the user folder. It is called in mainwindow.cpp,
after the files are copied from the bundle.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Currently, it was only possible to use a hard-coded default
cylinder in the preferences. At the same time, the user is
allowed to add own cylinders to a dive (by just typing in
a new name and cylinder properties). These own cylinders
could not be selected in the preferences, requiring the
user to manually add this every dive.
Not sure the reason for all this was intentional, or just
an overlooked aspect in the implementation. It appeared
that the selection list in the UI was constructed before
any logbook was parsed, so at that moment, there are only
hard-coded cylinders.
The fix is simple. Refresh the UI of the preferences just
before it is shown. While opening the logbook, a new
list of cylinders, including the own cylinders is
constructed, so the UI is refreshed to that.
While a simple change, there is a use case that might be
considered strange. Open a logbook, choose new logbook,
and change the default cylinder preference to an own
(from the previously opened logbook). Do not add a dive
with the new (own) cylinder and save this logbook.
Reopen this new logbook, and see that the default
cylinder in the preferences is empty. This is logical,
as the list of own possible cylinders is constructed
from the (new) logbook, that has no dive with that
specific own cylinder. I consider this acceptable
behavior, as it can be also be used to copy own
cylinders to a new logbook.
Fixes: #821
Proposed-by: Davide DB <dbdavide@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Correct spelling and typos in file filters.
Unify and translate file filter names.
Don't pass a file filter to a directory open dialog - not needed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Calls to report_error() crashed if not called from GUI thread.
Fix this by postponing error message display if not in GUI thread.
Code that creates a thread which possibly calls report_error()
is responsible for calling MainWindow::showErrors() to flush
the accumulated messages.
Note that there is a race condition in report_error() and
get_error_string(). Nevertheless, hitting it should be rather
unlikely (two threads producing error messages at the same time)
and hopefully it can be fixed rather easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This helps people who always use a std. salinity of e.g. 1020g/l.
If they have a log with their dives open and plan a new dive they will
have also for new planned dives the salinity set to their prefered value.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When enabling the dive list filter via the menu entry
"Log->Filter dives" and then switch off the filter via the small "close"
button of the filter:
Set the checked status of the menu entry correctly.
Also set it correctly when switching on/off via the menu entry to avoid
any situation where it is not synced.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
report_error() now does this automatically. So all these odd places in which we tried
to make sure that we show errors are no longer needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of waiting for a manual call to showError(), simply use the new
callback to always immediately show the error in the notification widget.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Require the FULLSCREEN_SUPPORT macro to enable fullscreen
support.
The toggle was added 4 years ago in Subsurface, but with the
current version of Qt 5.9.x, it's very buggy on Windows and
Ubuntu. While it's possible to make this work on Windows,
it seems to behave broken in different ways on different
versiosn of Ubuntu.
Fixes#705
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
current_dc is a macro that determines the dive computer
based on the current dive number. When the planner is started
from an emtpy dive list, the dive number ends up being -1 and
that doesn't produce a valid dive computer. Use the divecomputer
of the displayed_dive instead. This is done via a macro that
can also be used in two other places. Without this patch, the
planner crashed when called on an empty dive list.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This should prevent the problem of a user accidentally
"deleting" their dives in the cloud by hitting "save to cloud"
in the wrong moment.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In desktop-widgets, remove globe.cpp, globe.h and also remove
the NO_MARBLE macro usage.
At this point the MapWidget will always be created and there will
always be a map in the application.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Also change the menu entry text itself to "Map" instead of "Globe".
"Map" covers both Marble and Qt Location in terms of "map" solutions.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This is an attempt for a smooth transition between Marble
and Qt Location map integration. If NO_MARBLE is defined
an instance of MapWidget (Qt Location) is created,
else an instance of the Marble widget would be used.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The fake percentage needs to at least start at 0 for every cloud interaction.
Yes, the file global variable is ugly. So sue me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.
There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.
I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yes, currentdive can be undefined in case of of a new logbook and starting the planner
right away. Do not abort on that.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Data such as cilinders and used gasses are populated fromn the currently
selected dive when starting the planner. It is more logical to use
the dive mode (OC, CCR, pSCR) of the currently selected dive
as well. This commits changes this.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See https://github.com/Subsurface-divelog/subsurface/issues/253. The original
behaviour (greyed out when disconnected) is restored. Not sure where and when
got lost, but this simple change fixes it.
Fixes#253
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Maintab is one of our most complex classes, and it's
something I'm not actually proud of. But it currently
works and the idea of splitting it was in my head for
quite a while.
This is the third or fourth tentative of splitting it,
and this time I let the most complex part of it untouched,
the Notes and Equipment tab are way too complex to untangle
right now on my limited time.
A new class 'TabBase' should be used for any new tab that
we may create, and added on the MainTab (see the new lines
on the MainTab constructor).
Also, Extra Info, Information, Photos and Statistics where
ported to this new way helping reduce the number of
lines and functions on the MainTab quite a bit.
Overall this is a step in the right direction for the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
4 file types (that are very rarely used), did showup in the
import-import dive logs menu (e.g. the file filter), but were
missing from file-open logbook file type filter.
Just added them to the file-open part to be more consistent.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Remove the default stylesheet ("Courier" 13pt) from the planner output QTextEdit.
Remove the content of the html property of the QTextEdit because we overwrite it when doing setHtml.
After printing copy the original dive notes string displayed_dive.notes back to the QTextEdit
Advantages:
Display is according to font settings.
ctrl - mousewheel for zoom always works.
Drawbacks:
Printing font is same as display font but can be adjusted by zooming before.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When replanning a dive, do not set the surface pressure when it is 0.
Same for salinity.
This closes#161 .
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This way the menu entry becomes the togglee it appears it was designed to be in
the first place.
This closes#129
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to initialize the UI elements accordingly.
Fixes#1094
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This can happen when the user asks to replan a dive that
was imported from CSV.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea when this got broken. Fix seems like a hack as that variable
should get set in the plugin CMakeLists.txt. But it seems to work, so
"whatever".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, the dive computer settings weren't in the
settings prefs. This moves it, makes the boilerplate on Settings
ObjectWrapper and make things compile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If an attempt to contact the cloud storage fails, Subsurface switches into
offline mode. This allows us to go back online again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original negative lookahead failed in case the file name contains
more than 1 dot as it looks for dot that is not followed by the given
extensions. And such a match exists in the file name. The new version
should look properly if the file ends with any of the given extensions.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This updates the got progress indicator to the changed interface where we don't
pass in an explicit percentage.
It also finally fixes an old problem: If we don't allow the Qt main loop to
process the events, we'll never see a decent progress indicator...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
start of the QSettinsg Object Wrapper usage on the code
this first patch removes two macros that generated around
200 lines in runtime for something like a quarter of it
Basically, whenever we changed anything we called the
PreferencesDialog::settingsChanged and connected everythign
to that signal, now each setting has it's own changed signal
and we can call it directly.
The best thing about this approach is that we don't trigger
repaints for things that are not directly profile related. (
actually we still do, but the plan is to remove them in due time)
this commit breaks correct atualization of the profile (because
everything was connected to PreferencesDialog::settingsChanged)
and now I need to hunt a bit for the correct connections
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It no longer makes sense to lie about the version. If you are running a product
build, then the canonical version is the same version as the plain version used
to be. And in either case it makes much more sense to simply log the full
version information.
We used to have the differently styled versions for different OSs, but I don't
think this is needed anymore. Let's hope this doesn't go down as one of these
"famous last words" moments...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixes a capitalization error that prevented finding libssh2 in some
circumstances. And adds a missing include when building with libzip on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows users to not have to worry about this userid anymore. Both the
mobile app and the desktop app can now derive the userid from the cloud
storage credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And disable it if there is no satellite based location service (but see
the comment in the previous commit - this doesn't appear to work
reliably).
Nothing happens when you use the menu entry. This just allows us to hook
this up later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Print" button in the planner dumps the QTextEdit to
a QPrinter via ::print(). This patch renders the Profile
to a Pixmap which is inserted as Base64 stream in an <img>
tag and fed on top of the QTextEdit HTML contents.
This route preserves the planner notes as text in PDF prints.
The quick alternative is to render the QTextDocument to
a QPixmap as well, but that will not preserve the text
and pagination becomes manual.
Possibly the QTextDocument can be rendered as a QPicture
but pagination is still an issue, while so far there is exactly
one user requesting this feature!
Related small change in ProfileWidget2:
Explicitly hide the tooltip when printMode is true.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops. I fixed the previous commit, tested the fix, and then forgot to
update the commit and instead pushed it out. That was dumb.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But keep the Interface so it's still userfull to create a new
SocialNetwork when needed, but it will be part of the code,
and not a plugin.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes facebook plugin aware of it's connection status
enabling uploads only when connected, and hooking some things up.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't forbit the plugins to upload more than just the
current dive, it's better to change the name of the call.
also add a stub to make sure it's calling the right method inside
the plugin.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveCalculatedCeiling is the last class the references
MainWindow in the profile-widget stack.
In modelDataChanged() it looks for the information()
widget and sets a slot for the dateTimeChanged() signal that
information() emits.
To solve the issue we make DiveCalculatedCeiling recieve
a ProfileWidget2 reference and make ProfileWidget2 emit
the dateTimeChangedItems() signal.
ProfileWidget2 itself listens for the dateTimeChanged()
signal that information() emits and emits dateTimeChangedItems()
to notify any possible children/item listeners in the
ProfileWidget2::dateTimeChanged() slot.
The connection between ProfileWidget2 and information()
is set in MainWindow. This makes DiveCalculatedCeiling
unaware of MainWindow and which class originally emits
the dateTimeChanged() signal to ProfileWidget2.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
--
Think delegation.
Tomaz, please take a look at this one, to double check
if i messed up.
also i have zero idea how the mobile app is setting these
connections, if it does so even.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new preferences dialog still needs a bit of fine tuning
but should already work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
